How to remove my ex-company's server? Their IT set up hidden files to access computer anytime. I went thru all the Network

I worked for a company from my home. They had an IT company that would maintain ecverything thru the network and wirelessly.
I no longer work for the company but was able to keep the computer. Since I've left the company I have noticed they have accessed the computer. I have gone through all the steps to change the network, account settings, etc. But still - when I try to Update the Software I get an error message that I cannot access company.server. I don't want to access company.server. I want to wipe away them and their access to the computer. How can I find their hidden Network setup. I have all hidden files showing nd can't find it. Help. I want to use this computer but can't till I get those jerks' nose out! Thanks, Carole

I was afraid you were going to say that.
My desktop is 4-5 years old.
I've been messing with backing up programs onto my 200GB backup drive all evening.
I'm glad I only did work stuff on that computer and very little personal stuff.
I'll go check my disks, but they are very old. I'll have a ton of software updating on all the applications.
Would it work if I -
1st: boot-up from the original disc
2nd: Pull all files from the desktop computer onto my backup drive;
3rd: After I wipe out the computer just drag all the files and apps back upto the computer?
Or do I HAVE to reinstall all apps? Having old disks that will then need to be updated is not very fun.
Thanks, Carole

Similar Messages

HT1369 my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fi

my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fix it??

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

How do I get a new iTunes account to create a backup of what's on my wifes iPhone without deleting all the photos and stuff?

How do I get a new iTunes account to create a backup of what's on my wifes iPhone without deleting all the photos and stuff?

Well, I believe I found it.....
When I connect the IPhone the device name pops up under devices in the selection column. Right click on the device name and select "Back-up".....
If this is incorrect please let others know as I won't be able to because my wife will have destroyed all computers in the house for losing her data.

Does anyone know how to select text in Appleworks, click on the font button and then be able to scroll thru all the font so that one can see the text change as you scroll down the list, at present I have to do it one font style at a time and then repeat

does anyone know how to view text in Appleworks, to be able to click on the font button and then be able to scroll thru all the font so that one can see it change as you scroll down the list, at present I have to do it one font style at a time and then repeat? Thanks jl

Welcome to the Apple forums
Your question really belongs in the AppleWorks community/forum.
You can turn on fonts in actual type in the AppleWorks preferences.

I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone

I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please help

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

HT1349 How do I change my Icloud ID on my mobile, I have changed it on my computer and in other settings on the phone, but the actual icloud ID has not changed and my music is not syncing to my phone

Hi, I need some help, How do I change my Icloud ID on my mobile, I have changed it on my computer and in other settings on the phone, but the actual icloud ID has not changed on my phone and my music is not syncing to my phone

Note: Content bought using one Apple ID cannot be merged or transferred to another Apple ID.

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search by operating system (if this is even possible).

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

MY IMAC don't see the main server and all the network! I didn't nothing on his system, but since some days it is out of network on my company. And what is curious is that others computers can see mine. Some one can help me??

My IMAC lost the network, it can be seen but cannot see! What I have to do?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

How do I recover the original jpg photo files from my computer? They are embedded in the iPhoto Library and I cannot see the actual file.

I am trying to locate the original jpg or photo files that I uploaded from my camera. I know that the photos are there, because they show up in my iPhoto Library. Where can I go to find the original file ex: DSCN1242.jpg or OLM4564.jpg ?

Select the photo in iPhoto and use the command "File > Export" and set the "Kind" in the Export panel to "Original". That will write a copy of the original to a folder you can access in the Finder.
The command "File > Reveal in Finder" will show you the original inside the iPhoto Library, but you must not access the files this way. If you access them from other apps using the Finder, you will corrupt your library.
See Terence Devlin's user Tips:
iPhoto and File Management
How to Access Files in iPhoto
To what purpose do you need to find the files? Is there a problem and iPhoto giving an error message about missing originals?

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

How to remove Userscripts from Greasemonkey without enabling Greasemonkey? (I have deleted files from user/gm_scripts/ didn't help)

I installed an addon named Chat Resizer, which is for Kongregate, restarted to finish the install and firefox would not open.
Clicked it and clicked it nothing, Opened Task Manager, Ended the firefoxes and tried to open it again but nothing again.
Started FF in safe mode, cannot remove chat resizer with greasemonkey disabled, trying to enable it to remove it firefox refuses to start.
Uninstalled greasemonkey, FF works as normal, install it and it freezes once more.
Removed files from user/appdata/roaming/mozilla/profile blah blah/gm_scripts which had files for all of my scripts in them,
Firefox still won't start, uninstall greasemonkey, works again, install, doesnt work even with files for the scripts gone.
Any more suggestions?

Hello,
I found this tutorial, i think must works:
[http://ooiks.com/blog/mousehunt-autobot/install-uninstall-user-script-on-firefox How to Install and Unistall User Scripts Greasemonkey]

How to configure ipsec policy on windows server 2008 r2 to permit local machine only access to gateway,one other server and it's local ip?

I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.

Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

How to remove a frame from a goto Random Frame set?

I'm building myself a simple set of Flash Cards for school
and the setup I have is to goto a random frame where ActionScript
loads in a question I've put on that frame. I'm using variables to
keep score of the ones I get right and wrong.
What I want to be able to do is when I get an answer right
and Flash goes to the next frame randomly, to have this current
frame REMOVED from the options of frames it can go to. This way, it
won't repeat any questions I've answered right.

although I would suggest an Array based structure and dynamic
textfields, as opposed to a frame-nav based system here - you could
use an Array to store the current number of the frame you are on,
then when navigating to the next frame question, you could 'check'
against all other number stored in the array and choose a different
one if the test returns true. something like:

How do i add media to my iphone from another computer without syncing and deleting all the info currently on it

My iphone was synced to my old computer
How do i add content to my phone from my new computer. It says i can only be synced with one computer and it will delete everything on my phone to sync with the new computer.
This doesn't make much sense. What am i missing?

It does make sense. The iPhone is a one-person device and just syncs to one computer.
The way it should work is as follows:
Old computer content ---> New computer
New computer <---> syncs to iPhone
But the way you are trying to operate sounds like:
Old computer content ---> iPhone
... and ...
New computer content <---> iPhone
So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

How to remove my ex-company's server? Their IT set up hidden files to access computer anytime. I went thru all the Network

Similar Messages

Maybe you are looking for