How to remove OCS and install lync 2013 on MS Office 2007 and 2010
Hi,
We need to install lync 2013 on our systems having office 2007 and 2010 via SCCM 2012.
Please suggest.
Regards, Syed Fahad Ali
Lync 2013 no longer has its own installer, but instead uses the Office installer. You can create a customized installation and deploy it just like you do with Office:
http://technet.microsoft.com/en-us/library/jj204827.aspx
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".
Similar Messages
-
Uninstall Legacy Lync 2010 enterprise and install Lync 2013
I have a customer who has Lync 2010 enterprise and decided to install Lync 2013 but don't want migration and instead want to uninstall Lync 2010 . I would like to know in this case how to clean the active directory schema from Lync 2010 ?
and If there's anything else to consider before uninstalling Lync 2010 ? I will have to disable/remove all currently Lync enabled users but is there anything else?
I found this article, but would like to know what's the steps in sequence of removing Lync in this case?
https://social.technet.microsoft.com/wiki/contents/articles/9849.how-to-remove-lync-server-2010-from-active-directory.aspx
for example, do I have to first
1- Disable LYnc users.
2- Uninstall Lync server Application from Control panel
3- Remove Lync from Active Directory?
Would appreciate your help. thanks
thanks
Mohammed JHHi
Check this to Uninstall Lync 2010
http://terenceluk.blogspot.nl/2011/01/step-by-step-instructions-for.html
Check this to remove AD References
http://blog.ucmadeeasy.com/2010/11/09/lync-server-2010-active-directory-references-and-how-to-remove-them/
http://digitalbamboo.wordpress.com/2014/01/28/how-to-clean-your-server-of-old-active-directory-lync-ad-references-in-the-rtc-service-when-removing-the-last-2010-pool-fails-to-publish-in-the-lync/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
Ref: Having trouble to install visio 2013 alongside with office 2007
Hi,
I am trying to install Visio standard 2013 on a desktop computer which has already MS Office Suite Pro 2007 installed. Every time i try to install it, it keeps pop up the window saying that i need to uninstall per-release or beta version in order
to install Visio 2013. I have checked my computer all the way and even i have run fix it from Microsoft.Still popping up the same window...Any suggestion..PleaseDid you install the Visio Professional 2010/2013 trial version before even you have removed it? Office trial version cannot coexistent with Office production final release.
I notice that you have run fix, could you tell me the hotfix package you've tried?
At this point, please try to remove Office 2007 totally by the
http://support.microsoft.com/kb/928218/en-us and then install Visio Stardard 2013 first.
Tony Chen
TechNet Community Support -
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
How to Silently Install Lync 2013
Dears,
I would like to install Lync 2013 silently without manual installation for clients computers, I have lyncentry.exe basic software and I don't need to create OCT I wants use create new package and mention EXE file not MSI, during deployment in clients
computer Lync 2013 basic installation not install silently, please any recommendation and advice to solve this problem thanks...
Thanks..Hi Dana.Kadi,
This may be helpful to you.
Lync 2013 Client - Silent Installation
http://social.technet.microsoft.com/Forums/lync/en-US/cf9ca58c-b9e8-465c-afb4-ed3992092f81/lync-2013-client-silent-installation
Hope it can be helpful.
Best regards,
Eric -
Successfully installed Lync 2013 via Click-to-Run, but getting "Choose your product" prompt
After installing Lync 2013 client using method
Click-to-Run "Deploy Office 365 ProPlus from an on-premises location",downloaded Office source is on local hard drive with the
"config.xml" shown below.
I'm getting "Choose your Product" prompt after signing-in. We have Office 365 Enterprise E3 plan and we just wanted to upgrade Lync 2010 to Lync 2013 (not the Basic).
<Configuration>
<Add SourcePath="E:\Temp" OfficeClientEdition="32" >
<Product ID="LyncRetail">
<Language ID="en-us" />
</Product>
<!-- <Product ID="VisioProRetail">
<Language ID="en-us" />
</Product> -->
</Add>
<Display Level="NONE" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="E:\Temp" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
Though Lync will continue to work when you close the window. I need to deploy the full 2013 client to several
machines locally.
Thanks.Hello,
Looks like you‘ve tried a hybrid deployment with Lync 2010 and 2013, right? This might be the reason why Lync 2013 keep prompting to choose your product. Lync 2013 will automatically identify the products that it found for your account which you used to
login Lync 2013.
So, please try to remove any earlier version (Better to remove all Office 2010 suite) on your computer and try a fresh installation again. Let’s see the "Choose your product" prompt would appear again. -
OCS Migration to Lync 2013 Delegate which Director that authenticates
Hello - I am in the middle of a migration from OCS 07 to Lync 2013. Everything is working pretty well. I have a new Lync Server with some users migrated over to it already and communication is fine between the Lync Desktop Clients and the OCS Desktop Clients.
We now want to use the Mobile Lync Client so I have installed Lync 2013 Client on my iPhone 5S. I was able to install the root cert on the phone however, when I try to sign in, I am getting the following error:
"We can't sign you in because your organization doesn't support this version of Lync. Please install Lync 2010 from your mobile store."
I am running Lync 2013 Standard Edition and I am running Lync 2013 Client for iOS. I can only assume that because the OCS director is still running it is handling authentication and its not compatible with Lync 2013. Is this a correct assumption?
That being said, and if that's indeed the issue, is there a way to delegate the Lync 2013 Director to take over authentication?
Thank you!
Russ, MCSEHi there,
Lync 2013 Mobile clients relies on UCWA services to connect to Lync server 2013 services, also Lync mobile autodiscovery depends on Lync web services publishing. Therefore you should make sure that lyncdiscover.sipdomain and lyncdiscoverinternal.sipdomain
points to Lync server 2013 web services and not OCS 2007.
specifically Lyncdiscover.sipdomain should point to the public IP address on which the Lync External WebServices are published.
so it is quite sure that if the above requirements are not met and especially the DNS configuration for Lyncdiscover and lyncdiscoverinternal mobile clients will not be able to connect.
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
No coexistence, Totally decom Lync 2010, then install Lync 2013
I have went through decomming Lync 2010 Enterprise on prem with the desire to go to Lync 2013 Hosted Multi-Tenancy, using the same domain.
So, as you can imagine doing this in a test env. (mirroring the prod env.) I have uninstalled Lync 2010, followed all best practices, made sure ADSI ref. were gone to Lync 2010 (to my knowledge).
Now that I have uninstalled the last Lync 2010 boxes, Installed Lync 2013 on the first frontend server, fired up the setup and went through the topology builder wizards, and after filling out Edge server pools, etc, I have a topology showing Lync 2010 and
2013. Is that correct? This is my first time installing 2013 Lync. Is Lync 2010 supposed to be showing in the topology?
Maybe this is normal for 2013, maybe this doesnt matter for me to continue. I'd just like to cleanly get rid of any 2013 references or leftovers.
JoshHi,
Agree with Anthony and Rodolfo.
Here is Lync server 2013 topology (I didn't deploy Lync server 2010):
What's more, please check if you remove all Lync server 2010 information from AD.
If you meet error about remanent Lync information in AD, you can refer to the link of "Remove Lync from Active Directory":
http://blog.armgasys.com/?p=320
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
ANlets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows. -
How to remove legacy exchange servers. exchange 2013
hello I recently tried to create a DAG and it failed so i decided to remove the DAG and also the new server i created for it.
however now on my main production exchange server i still have legacy things left over from the server i deleted.
for instance Get-ExchangeServer command will bring up my current server and the old ones as well.
what i want to know is how do i clear our out all traces of the older servers?
many thanksHere's a good article to refer to remove Exchange 2013:
http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
for 2007 and 2010:
http://thlnk3r.wordpress.com/2013/04/17/how-to-remove-legacy-exchange-servers-using-adsiedit-tool/
Thanks, MikeV MCSE 2012 -
How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?
"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz -
I want to uninstall ios 6 from Iphone 4s and install ios 5.1.1 ... and how it to do,please help me!
There is No Apple Supported downgrade path...
See this Discussion...
https://discussions.apple.com/message/19702812#19702812
From the More Like This section on the right. -
How can i change the full download and install path because my C: ist full and it automaticly downloads it on C: i allready changed in on adobe creative cloud but it dont work
Read the part about SSDs. Otehrwise there is nothing you can do. Certain components wil lalways install on your system root drive.
Mylenium -
Cant install Lync 2013 eval on vista
I wast to install Lync 2013 eval version on my vista but it gives error that it can be installed on windows 7 or later, why this descripency? is there a patch for vista?
Hi,
You can change to use Lync client 2010 on Windows Vista. Lync client 2010 supported OS:
Windows 7, Windows Server 2008 Service Pack 2, Windows Vista Service Pack 2, Windows XP Service Pack 3.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Because the Firefox update today required me to update and install an update to an adobe application and then required me to restart my computer I "lost " the connection to my previous session and tabs. Is there any way to recover my tabs from yesterday?
Do you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4
-
Slow code insight in JDev 9.0.3.1035
Hello, sometimes when I invoke code insight in my Jdev it needs up to 30 secs to display. In this time JDeveloper is completely blocked and does not react to any keyboard or mouse input. It doesn't matter if the library is on a network drive or on th
-
Web based videos (youtube etc) have no sound and then stops after 4 seconds
When i try to play a video clip from any web site, the video plays with no sound for exactly 4 seconds, then it stops. I can 'scroll' the time line anywhere, and the video plays from that point for another 4 seconds -still without sound. Ive tried to
-
How to retrieve alpha channel data in format plugin
I want to ask how to get the alpha channel 's data that describle the document's transparent info, in a format plugin. for example , when open a PNG file in Photoshop, the photoshop set FormatRecord:: planes to 3 (not 4), in this case i can only requ
-
Formating page select in a Pivot Table
We have a Pivot Table view that has 12 columns, so it is a bit large (more or less like 2 screens wide). The Page select is displayed in the middle of screen so the user doesn´t see it right away... he has to roll the screen and then see/select it...