How to remove  options like  add , toogle, delete  in the BI Portal

When you logon to the portal and select any planning function and after giving the input for mandatory cells and after execution of that
click the filter option on the right side of screen. In the next window  How can we restrict the options like add , toogle, delete in the BI Portal.

Hi vikas,
Go to System Admin ->System Config->UWL Admin.
select your system alias.
Click on Click to Click to Administrate Item Types and View Definitions.
Select your UWL configuration.
Download DTD as well as XML file through Download Configuration.
Then you can edit the xml file using XML spy editor or anyone.
to upload go back to the same page and select the tab...Upload new configuration.
Do not forget to clear the cache after upload.
Hope this helps you.
Regards
Atul Shrivastava

Similar Messages

  • How to remove options in context menu of the task in UWL.

    Hi,
    How to remove options or customize the context menu of the task in UWL.
    I have 4 options(Edit,Remove,Forward,Resubmit) is appearing in the context menu.
    My requirement is to delete Forward option form the menu list and only 3 options
    should appear in the list.
    Can anybody suggest where to change?
    Thanks,
    Vikas

    Hi vikas,
    Go to System Admin ->System Config->UWL Admin.
    select your system alias.
    Click on Click to Click to Administrate Item Types and View Definitions.
    Select your UWL configuration.
    Download DTD as well as XML file through Download Configuration.
    Then you can edit the xml file using XML spy editor or anyone.
    to upload go back to the same page and select the tab...Upload new configuration.
    Do not forget to clear the cache after upload.
    Hope this helps you.
    Regards
    Atul Shrivastava

  • I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

    I add my comcast email to the mail on a iMac running Maverick. It downloads all my emails from there. How do i get my email to delete of the the server

    Go to Mail Preferences>Accounts, click the '+' button below the list of accounts and insert the settings, username and password as instructed. Some account types can be set up automatically as soon as Mail knows the emails address (because the server settings are built in), in other cases you will have to get them from your ISP.

  • How to remove options under Create Draft in SOCO SRM 7.13 SP01

    Hi All,
    We have a requirement to remove the option like Rfx,Contract and Auctions under Create Draft on the below screen.We checked the WD component /SAPSRM/WDC_DO_SOCO_GAF_2 for it but did not get much to delete these options.,Kindly provide your expert help to resolve this issue.
    Let me know if you need any other details.
    Thanks,
    Ankur

    Hello,
    do not know if it also works with SRM 7.13, but check this below blog:
    Restricting draft document types in SRM 7 sourcing cockpit
    Regards.
    Laurent.

  • How to manage address bar(add or delete webcites).

    How to manage address bar, menu bar and how to add or delete webcites ?

    Open your browser. In the menu bar at the top of the screen, click on the name of your browser (safari, firefox, camino, etc.). From the list, choose preferences, write the address of your desired home page in general preferences.
    With your browser open, choose manage bookmarks. This will allow you to add, delete, or organize your bookmarks.
    firefox 101 address bar
    http://www.dailymotion.com/video/xec3mb_firefox-101-2-the-firefox-address-s_tech

  • How do I uninstall an add on file from the Seamonkey browser?

    HOW DO I UNINSTALL AN ADD ON FILE FROM MY SEAMONKEY BROWSER?
    Mozilla needs to make their products more user friendly. There is a multitude of people out there
    who are "NOT" very computer literate. Older people like myself, for example, who are old
    school, have a difficult time being dragged kicking and screaming into the electronic generation.
    My grandchildren are better at this kind of stuff than I am; yet we really don't have much choice
    but to try and make the transition, because I have found that there are a lot of types of business
    that you cannot get done unless you are willing to do it with a computer, going online.
    My problem is not with Firefox (I don't use it because it is too slow) , because I use the Seamonkey browser. The problem I now have is that when I try to download some software, I get a message that says I must first uninstall a certain “add on” file, (npfdm.dll.), a "Free Download Manager" file. When I get the list of add ons through the “help” drop down menu, there is “NO” link or any way I can see that will allow me to uninstall this file from the add on list. Therefore, Seamonkey becomes useless to me. Someone please help me with this. Thank you.
    Tim Applegarth
    Phone: xxx-xxx-xxxx
    Email: [email protected]
    edit removed email/phone number as only spambots will be making use of them though it may be too late as this is a public forum.

    SeaMonkey support is over here - http://forums.mozillazine.org/viewforum.php?f=40

  • How to remove sites when right-clicking Safari in the Dock?

    Right clicking Safari in the Dock shows 3 sites visited awhile ago. There is a diamond shape before each. And each is repeated several times, 16 for one. I've cleared History, closed Safari, removed it from the Dock, restarted Safari. they're still there. Opening them and deleting just increases the amount.
    I'm stymied.
    Any help would be appreciated.

    I've resolved the issue myself.
    First, let me clarify, each of these "sites" had several tabs.
    Here's what worked: by Option-clicking on one closes all other tabs. Of course this can be done manually, closing each tab separately.
    Once all but one tab is showing click the "close", red circle, button and the site deletes from the Safari list in the Dock.
    Not sure why this anomaly happened but I know how to fix it if it should happen again.
    Tricia

  • How do I make precise frame range deletions in the middle of project clip?

    I need to make a precise deletion of frames 8:55:15 to 8:56:12 in the middle of my project video clip.
    Problem: The trimmer won't do it because it keeps the very selection which I want to delete, while deleting the frames before and after my selection range.
    Problem: When in my project, while the red pointer tells me exactly where I am in my clip (when I select Playhead Information in View), the problem is that I have no information to tell me the exact location of the right and left selection handles so I can precisely select 8:55:15 and 8:56:12 of my clip for deletion. I press the Option key and the pointer moves to the beginning or end of the clip, not to one end handles of the selection.
    In iMovie 3 when the selection handles are moved I get information as to exactly where each handle rests in terms of time or frames for easy deletion of the exact selection I want to remove.
    Can iMovie 08 make precise frame range deletions somewhere in the middle of a project clip?
    Thank you.

    Problem: The trimmer won't do it because it keeps the very selection which I want to delete, while deleting the frames before and after my selection range.
    Don't use it. It is for trimming the ends from the clip selection.
    Can iMovie 08 make precise frame range deletions somewhere in the middle of a project clip?
    Yes. The basic strategy is to expand the project to its maximum scale (0.5 sec) and to then select the range of frames you wish to to edit. Start by slowly dragging the playhead across the clip in the area you wish to access. The time in white below the window will display the exact (minute:) second: and frame across which you are skimming, as well as display the frame itself in both the thumbnail and the preview screens. (NOTE: I prefer visual selection of the frames rather than using a time reference since such references may change as transitions and titles are added.) When you locate the first frame you wish to delete, press the mouse to select it. While holding down the mouse, continue to scrub the clip to locate the last frame you wish to delete. When you locate it, release the mouse. At this point you can either split the clip and keep/delet the sub-segments as needed or delete the selected range using the "Delete Selection" or "Cut" Edit menu options.
    Another method would be to select the approximate range you wish to edit in the middle of the clip and then grab and drag the beginning and ending "handles" to adjust the exact start and stop frames for the "Selected" range. In this case, the times ate the bottom of the "Project" window represent the "in" and "out" points for the range of frames currently selected. Once again, I prefer to select the in and out points visually as I scrub. Also, for me, this two-stage adjustment approach seems quicker and easier for my approach to editing.
    The problem is that the playhead refers to the red pointer, thus I can get an exact location of the pointer in terms of time and frame, but NOT a location of the selection handles.
    Okay, I see what you mean. However, if you use the two-stange method described above, the point where you press the mouse to mark the begin handle of the selected range is the "begin handle". Same holds true for the release point (playhead time time) for the stop handle.
    Is there some way I can line up the pointer exactly with the location of the right or left handle then use Option key and Left/Right arrow keys to move the handles to my exact range frame by frame?
    Not really at the same time. iMovie does allow you to set the exact start point and will tell you when you have reached the exact number of seconds and frames for the range you wish to delete. Adding the two together does give you the exact time of the end of the range in seconds and frames.

  • How to remove a PC from shared section in the finder

    Community,
    I found a pc name in the "shared" ("CONDIVISI" section for italian speakers like me!!) section of the left menu in the Finder. It is something I don't recognize. I never connected to this computer. Any clue how it has been able to get there? How to remove it?
    I appreciate your answer
    Antonio

    Most likely, at some time, "betesda-vaio" was connected to the same network as your Mac.  (Perhaps a friend connected their Vaio laptop to your wireless network during a visit?)
    The Shared (CONDIVISI) section shows devices that are available on the network; it does not mean that your Mac is connected to the device (in this case "betesda-vaio").
    If "betesda-vaio" is no longer on the same network as your Mac, if you log out (or restart), it should disappear from the sidebar.

  • Does anyone know how to remove references to facebook and Twitter from the settings and "share" feature screens?

    I don't use facebook or Twitter and I shouldn't have to see references to them in the settings section or the "share" dropdowns of Safari, the photo management screens, or anywhere else. Can anyone tell me how to remove these references?

    To the best of my knowledge you can't.
    You can try going into the settings and restrictions and turn them off and see if that makes the icons disappear (probably won't) but there's no way to select the icons you want.

  • How to make some junk code not deleted by the optimizer?

    I'm doing a security application. I wrote this function to check for some license, that will throw an exception when a license is not present:
    void CheckLicense();
    Then I found this can be easily hacked, since the hacker can simply replace every CALL instruction to this function with NOPs, and then run the program without a license. To make life harder for hackers, I came up with this NULL pointer trap:
    void CheckLicense(int **ptr)
    int a = 42;
    ALotOfCode();
    *ptr = &a;
    void CheckLicenseWrap()
    int *ptr = NULL;
    ALotOfCode();
    CheckLicense(&ptr);
    ALotOfCode();
    int a = *ptr;
    Now if the hacker bypasses CheckLicense, dereferencing ptr will break the program.
    However this doesn't work when I switched from Debug mode to Release mode: commenting out the call to CheckLicense does not break the program as it should. I think it's probably because the optimizer deleted the statement "int a = *ptr", since
    "a" is never used.
    So the question is, how can I implement this NULL pointer trap without my code being deleted by the optimizer?
    The best solution I can think of is "srand(*ptr)", but that will cause a side effect of resetting the RNG. I don't want my function to have any side effect. Nor do I want "if(ptr == NULL)", because that will likely make the trap very
    obvious.

    On 2/2/2015 10:19 PM, MacMillan_hopefullyUnused wrote:
    Then I found this can be easily hacked, since the hacker can simply replace every CALL instruction to this function with NOPs,
    Easier still, the hacker can replace the first few bytes of the function itself with RET, and not bother hunting down every call site.
    Now if the hacker bypasses CheckLicense, dereferencing ptr will break the program.
    What's to stop said hacker from bypassing CheckLicenseWrap instead?
    Igor Tandetnik

  • How to handle case like Housing loan to pay the fix amount and system can deduct the principle and interest automatically in Treasury

    Dear Treasury Guru,
    I have one scenario from my client like a Housing Loan that the system can generate the principle and interest paid flow type automatically depend on interest and contract condition, I've never faced this scenario before so I'm not sure that Treasury can support or not.
    for example : Loan amount = 500,000 USD, Fix amount = 50,000 per month, Interest rate = X%
                              Payment amount               Principle           |        Interest
    1st month =               50,000           --->         15,000                      35,000
    2nd month =              50,000          ----->        17,000                      33,000                   
    3rd month =               50,000         ------>        19,000                      31,000
    Please suggest how to let the system generate the Principle and Interest flow type folllow the example above.
    Thanks
    Pongrapee K.

    Hello Pongrapee,
    I think apart from the interest condition, you need a condition for an annuity repayment with amount 50,000 - this will make sure the sum of interest and repayments are 50,000 for all periods.
    If you leave the annuity amount blank, the system will calculate the annuity in a way that the sum of interest and repayments remain constant and all the nominal is repayed at the end of term.
    But in both cases you will have to give the interest percentage in the interest condition.
    Hope this helps!
    Marie

  • How can i find an excel file deleted from the server

    In our office we all have access to the main server. Recently a document that we need was deleted from the server. It's not in the trash. Can and how would we be able to find and recover this deleted document? Specifically I am looking for an excel document, and I already checked the recent docs on excel.
    thanks!

    Have the admin for the server restore the file from the backup

  • How to silently install office add-ins and bypass the microsoft office customization installer popup

    Hello all,
    I want to install an office add-in for all the computers in my company silently. But when I use the commands "%~dp0\test.exe" /S. I receive the following popup.
    Is there a way to bypass this to install the add-in silently?
    Thank you very much for the help.

    probably, this file was downloaded via Internet Explorer, from the IE "Internet" zone?
    If so, the Alternate Data Stream, on the file, will have the Zone.Identifier populated.
    If you right-click the file in Windows Explorer, do you get the "Unblock" button offered?
    If so, click Unblock, and then try your script again.
    more on ADS:
    http://blogs.technet.com/b/askcore/archive/2013/03/24/alternate-data-streams-in-ntfs.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to stop transform panel add stroke value to the shape I created

    Good morning,
    Does anyone know how to stop Transform panel in Illustrator CC adding the value of the stroke to the size please.

    In Preferences (Cmd[Ctrl}-K) uncheck Use Preview Bounds.

Maybe you are looking for