How to remove parent nodes in an output XML?

Hi! I'm having a problem as to removing a parent node in an xml output. The scenario goes like this, I have a source IDOC and two target External Definitions. When I have declared the two External Definitions, XI inserted a structure in the output xml as shown below:
Messages        (1..1)
          Message1       (1..1)
             Message1Header    (0..1)
          Message2       (1..1)
             Message2Header    (0..1)
Is there anyway to have an output that looks just like this (without their respective parent nodes)?
a.) Message1Header (0..1)
or
b.) Message2Header (0..1)
Please help
Regards,
Mark

Since you have two External Definitions and you are using both in on mapping hence your scenario becomes 1:N mapping scenario and this is the reason you are getting the additional nodes in your mapping.
so if your requirement is 1:N then whatever you are getting is correct, you can refer the below mentioned blog for help on this, But if you don't want the additonal nodes then you have to create TWO different mappings and used the external definitions seprately in each mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
I hope it helps...

Similar Messages

How to remove a node from a target xml payload in reciever file channel

i have a scenario where i have to remove a node from my target xml file in receiver file channel and want xml as the output file. I don't want a fixed length file. How to do that in receiver channel? Do we need to use file content conversion for that?

that will result in giving you a fixed file or a separator defined file.
it will not give you an XML file.
In case you want a XML file, instead of using variable substitution, use Dynamic configuration and adapter specific properties.
Some ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

How to remove namespace link from the output XML

i have to remove 'xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions"' (namespace) from the output xml file which is generated from the BIP. I need my output XML file without that namespace link, this namespace link is coming for each element.
Anybody know how to do that please help.
output xml file
<?xml version="1.0" encoding="UTF-8" ?>
<Reports version="2.00">
<deliveryNote xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<subjectId />
</deliveryNote>
<deliveredReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<o>11</o>
<o>21</o>
<o>121</o>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</Reports>
my xslt file
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions" >
<xsl:output method="xml" encoding="UTF-8"/>
<xsl:template match="/">
     <xsl:element name="Reports">
          <xsl:attribute name="version">2.00</xsl:attribute>
               <deliveryNote>
                    <subjectId></subjectId>
                    </deliveryNote>
               <deliveredReports>
                    <referDate>[Delivery note->H4]</referDate>
               </deliveredReports>
               <simpleReports>
                    <numberOfReports>2</numberOfReports>
                    <nReport>
                              <reportName>Xyz</reportName>
                              <reportVersion>1.0</reportVersion>
                                   <observations>
                                   <numberOfObservations>15</numberOfObservations>
                                   <columnObservation>
                                        <y>9</y>
                                        <rO>
                                             <x>14</x>
                                                  <xsl:for-each select="TEST_XML/LIST_R1/R1">
                                                       <o><xsl:value-of select="xdoxslt:lpad(COL1,10,' ')"/></o>
                                                  </xsl:for-each>
                                        </rO>
                                   </columnObservation>
                                   </observations>
                         </nReport>
                    </simpleReports>
          </xsl:element>
</xsl:template>
</xsl:stylesheet>

Please post the same in BI Publisher forum
BI Publisher
Thanks,
Vino

How to remove a node from nlb at runtime?

hello,
i need to temporally exclude a node from an nlb.
May happen that a server is up and working but the web application i'm balancing is out of sinch with the same application in the others nodes.
Eg. some static variables are not the same of the same static variables of other nodes, because of a timeout, a write error and so on but the server is still working.
in this case i need to stop the server from nlb because the information in the web application is not in sinch with other nodes.
I need to prevent users from being serverd from this out to date server, untill it will became updated, but i need to do this programmatically
how can i do it?

"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work.

How to remove target node if source field value is empty SAP PI Mapping

Hello,
how to remove target node if source field value is empty in graphical Mapping.
Like if
MIddle name in source filed is empty, I would like to eliminate target field from out put XML.
Thank you
John

Hi Jhon,
If you want to remove all empty tags and you dont to complicate your message mapping, you can use a XSL, after the message mapping, to remove all the empty tags:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="node()|@*">
        <xsl:copy>
            <xsl:apply-templates select="node()|@*"/>
        </xsl:copy>
    </xsl:template>
    <xsl:template match="*[not(@*|*|comment()|processing-instruction())
     and normalize-space()='' ]"/>
</xsl:stylesheet>
Regards

How to remove a node from 4 node sun cluster 3.1

Dear All,
We are having a four nodes in a cluster.
Could any one please guide me, how to remove a single node from a 4 node cluster.
what are the procedure and step's I have to follow.
Thanks in advance.
Veera.

Google is pretty good at finding the right pages in our docs quickly. I tried >how to remove a node Solaris Cluster< and it came up with
http://docs.sun.com/app/docs/doc/819-2971/gcfso?a=view
Tim
---

How to remove a node from XMLList

How to remove a node from XMLList
I want remove the first node from XMLList
and how to get the combobox all values string:
<data>
<value>2</value>
</date>
<data>
<value>5</value>
</date>
<data>
<value>8</value>
</date>
I need a string whit value "2,5,8"
thkan you.~

"DuoMi" <[email protected]> wrote in message
news:gnojbf$2sg$[email protected]..
> How to remove a node from XMLList
>
> I want remove the first node from XMLList
>
>
> and how to get the combobox all values string:
>
> <data>
> <value>2</value>
> </date>
> <data>
> <value>5</value>
> </date>
> <data>
> <value>8</value>
> </date>
>
> I need a string whit value "2,5,8"
>
> thkan you.~
I think something like
comboBox.dataProvider..value.toString()
will work.

How to remove all nodes (except root node)from a Jtree?

How to remove all nodes (except the root node)from a Jtree?

Either:
- remove all children of root.
- save the root node, throws away the tree model, build a new TreeModel with the saved root, set the new TreeModel in the JTree.
- implement your own TreeModel, which would support an emptyExceptRoot() method.
IMHO, using the DefautlTreeModel and DefaultMutableTreeNode does lead to all sorts of small problems when the app evolves, and implementing your own TreeNode and TreeModel is not that hard and much more efficient.

How to remove a node from a xml

Hi All,
I want to remove a node from my xml output. Can anyone suggest me how to get that? I want to implement this by using the ASSIGN activity.
My sample output is
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing">
     <env:Header>
          <wsa:MessageID>urn:4EF1A350677C11E1BFA7794ED76B03EF</wsa:MessageID>
          <wsa:ReplyTo>
               <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
          </wsa:ReplyTo>
     </env:Header>
     <env:Body>
          <SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
               <ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
                    <Orders>
                         <Id>1-15IXJ</Id>
                         <AccountId>1-2EE</AccountId>
                         <OrderNumber>1012-1234</OrderNumber>
                         <ListOfLineItems>
                              <LineItems>
                                   <Id>1-15IYN</Id>
                                   <LineNumber>303</LineNumber>
                                   <OrderNumber>1012-1234</OrderNumber>
                                   <OrderHeaderId>1-15IXJ</OrderHeaderId>
                         </LineItems>
                              </ListOfLineItems>
                         </Orders>
</ListOfOrderInterface>
          </SiebelOrderQueryByExample_Output>
     </env:Body>
</env:Envelope>
I want to delete the <ListOfLineItems>node from the xml above so that my resultant would be,
     <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing">
     <env:Header>
          <wsa:MessageID>urn:4EF1A350677C11E1BFA7794ED76B03EF</wsa:MessageID>
          <wsa:ReplyTo>
               <wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
          </wsa:ReplyTo>
     </env:Header>
     <env:Body>
          <SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
               <ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
                    <Orders>
                         <Id>1-15IXJ</Id>
                         <AccountId>1-2EE</AccountId>
                         <OrderNumber>1012-1234</OrderNumber>
     </Orders>
</ListOfOrderInterface>
          </SiebelOrderQueryByExample_Output>
     </env:Body>
</env:Envelope>
Please suggest something Its urgent.
Thanks in Advance.

It goes something like this, taken from the above blog entry:
Removing a node from node-list
With the bpelx: extensions in BPEL you are able to insert and update nodes in a node list. A node-list is an XML message that contains a set of records. In this article I use the following example:
<BookList xmlns="http://message.vijfhuizen.com">
<Book>
<title>The Lord Of The Rings</title>
<author>J.R.R. Tolkien</author>
</Book>
<Book>
<title>Harry Potter</title>
<author>J.R.R. Tolkien</author>
</Book>
<Book>
<title>The Hobbit</title>
<author>J.R.R. Tolkien</author>
</Book>
<Book>
<title>Storm; Chronicals of Pandarve</title>
<author>Don Lawrence</author>
</Book>
</BookList>
For creating and updating node lists the bpelx: functions are enough to handle this. But when you want to remove a particular node, you can use the bpelx:remove function. But this function can only remove a node from a particular position. For example removing the second node you code:
<bpel:assign>
<bpelx:remove>
<bpelx:target variable="VarBookList" query="/Booklist/Book[2]" />
</bpelx:append>
</bpel:assign>
It is hard to code the bpelx:remove to create a xpath to dynamicly remove node. You would like to remove the second node based on the xpath:
/Booklist/Book[title="Harry Potter" and author="J.R.R. Tolkien"]
You can add the above xpath in the bpelx:remove, but you are not able to make this dynamically.
There is a solution. The trick is to create a stylesheet that copies the data into a new message, but removing that particular records. Create a stylesheet that does the normal copy of the XML message. Then add a <choose> element in the stylsheet to filter that particular record.
<xsl:template match="/">
<BookList>
<xsl:for-each select="/BookList/Book">
<xsl:choose>
<xsl:when test="title='Harry Potter' and author='J.R.R. Tolkien'"/>
<xsl:otherwise>
<Book>
<title>
<xsl:value-of select="title"/>
</title>
<author>
<xsl:value-of select="author"/>
</author>
</Book>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</BookList>
Now we have a XSL stylesheet that removes a particular record, but this is not variable. This can be done via XSLT parameters.
<xsl:param name="pTitle"/>
<xsl:param name="pAuthor"/>
<xsl:template match="/">
<BookList>
<xsl:for-each select="/BookList/Book">
<xsl:choose>
<xsl:when test="title=$pTitle and author=$pAuthor"/>
<xsl:otherwise>
<Book>
<title>
<xsl:value-of select="title"/>
</title>
<author>
<xsl:value-of select="author"/>
</author>
</Book>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</BookList>
</xsl:template>
Now we are able to use this stylesheet in BPEL. In general BPEL create the following code:
<assign name="Transform">
<bpelx:annotation>
<bpelx:pattern>transformation</bpelx:pattern>
</bpelx:annotation>
<copy>
<from expression="ora:processXSLT('RemoveNode.xsl'
, bpws:getVariableData('Variable_BookList','payload')" />
<to variable="Variable_BookListTemp" part="payload"/>
</copy>
</assign>
But this code does not pass parameters to the stylesheet. The ora:processXSLT() can do this it has an additional parameter in this function:
<assign name="Transform">
<bpelx:annotation>
<bpelx:pattern>transformation</bpelx:pattern>
</bpelx:annotation>
<copy>
<from expression="ora:processXSLT('RemoveNode.xsl'
, bpws:getVariableData('Variable_BookList','payload')" />
, bpws:getVariableData('BPELxslparameters'))"/>
<to variable="Variable_BookListTemp" part="payload"/>
</copy>
</assign>
Now only you have to create the BPELxslparameters variable and assign it with the correct name/value pairs. The structure of the this variable is as follows:
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/service/bpel/common"
targetNamespace="http://schemas.oracle.com/service/bpel/common"
elementFormDefault="qualified">
<xsd:element name="parameters">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" type="xsd:string"/>
<xsd:element name="value" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Create in BPEL the variable BPELxslparameters and let it point to this strucure:
<process ....
xmlns:common="http://schemas.oracle.com/service/bpel/common"
.../>
<variable name="BPELparameters" element="common:parameters"/>
Now we can in BPEL create an empty XML message, based on this strcuture and assign the values to these parameters and then call the processXSLT function.
<bpelx:assign name="Assign_GenerateEmptyParameterSet">
<copy>
<from>
<parameters xmlns="http://schemas.oracle.com/service/bpel/common">
<item>
<name>pTitle</name>
<value/>
</item>
<item>
<name>pAutor</name>
<value/>
</item>
</parameters>
</from>
<to variable="BPELparameters" query="/common:parameters"/>
</copy>
</bpelx:assign>
<assign name="Assign_setXSLTParameters">
<copy>
<from expression="'Harry Potter'"/>
<to variable="BPELparameters" query="/common:parameters/common:item[1]/common:value"/>
</copy>
<copy>
<from expression="'J.R.R. Tolkien'"/>
<to variable="BPELparameters" query="/common:parameters/common:item[1]/common:value"/>
</copy>
</assign>
Posted by Marc Kelderman SOA Blog at 1/16/2008 09:20:00 PM

How To Remove Empty Node From Source XML

Hi,
How can I remove an empty node from the source xml in a XSLT mapping.
For e.g. If the source xml is like:
<SRC>
<Node1>SAP</Node2>
<Node2/>
<Node3>XI</Node3>
</SRC>
Then the xml should become:
<SRC>
<Node1>SAP</Node2>
<Node3>XI</Node3>
</SRC>
I need to do this because the output of my XSLT mapping is showing blank spaces for each blank node.
Thanks,
Abhishek.

Use <xsl:if>
Or else you may find different options here
http://www.dpawson.co.uk/xsl/sect2/N3328.html#d4804e304
Regards,
Prateek

Filteredtreemodel, how to hide parent nodes if no children

hi. i have surfed and read a lot of posts and topics here regarding filteredtreemodel. some i found hard to understand so i chose to use NiceGuy1's code from long ago since it's the easiest to understand.
package test;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeModel;
import javax.swing.tree.TreeNode;
import java.util.ArrayList;
import java.util.Enumeration;
public class FilteredTreeModel extends DefaultTreeModel {
    // this hashmap gets the list of pdf files and the filter status
    private String filterText;
    private DefaultMutableTreeNode orig_root;
    public FilteredTreeModel(DefaultMutableTreeNode root) {
        super(root);
        orig_root = root;
    public void setFilterText(String s) {
        this.filterText = s;
        reload();
    public String getFilterText() {
        return this.filterText;
    @Override
    public Object getChild(Object parent, int index) {
        return getFilteredChildren(parent).get(index);
    @Override
    public int getChildCount(Object parent) {
        return getFilteredChildCount(parent);
    @Override
    public int getIndexOfChild(Object parent, Object child) {
        return getFilteredChildren(parent).indexOf(child);
    private int getFilteredChildCount(Object parent) {
        return getFilteredChildren(parent).size();
    private ArrayList<TreeNode> getFilteredChildren(Object parent) {
        ArrayList<TreeNode> filteredChildren = new ArrayList<TreeNode>();
        DefaultMutableTreeNode parentNode = null;
        parentNode = (DefaultMutableTreeNode)parent;
        for (Enumeration e=parentNode.children(); e.hasMoreElements();) {
            DefaultMutableTreeNode nextNode = (DefaultMutableTreeNode) e.nextElement();
            DefaultMutableTreeNode dummy = null;
              if (nextNode.children().hasMoreElements()) {
                  filteredChildren.add(nextNode);
            } else {
                // if node is leaf node
                if (filterText == null ) {
                    // add right away if no filter
                    filteredChildren.add(nextNode);
                } else {
                    // if filter matches this leaf node, add it. if not, how to check if
                    // parent nodes have empty children and remove it.
        return filteredChildren;
}i havent had luck the whole day trying to make this work. it seemed that once the filteredChildren.add() is called, it gets rendered to the treecellrenreder right away so if i wnat to remove the parents (in case it has no children based on the filter),the parent nodes will stay put in the jtree. any workaround? or ideas? i dont want to use a different defaulttreemodel for this. i want to avoid that because i have lots of nodes in my jtree.

Looks like you need this:
for (Enumeration e=parentNode.getFilteredChildren(); e.hasMoreElements();) Edit: okay, that was just a quick guess. Actually you're going to get into trouble if you try to recursively suppress nodes with no children. First you suppress all the leaf nodes (because they naturally don't have any children). Then you suppress all of their parents, because now they don't have any unsuppressed children. Then you suppress all of the parents' parents, because now they don't have any unsuppressed children... and so on until you only have the root left. So you need to refine that requirement.
But I get what you're saying. I had to do a similar thing, only I didn't use a FilteredTreeModel, I just built the TreeModel based on a selection from another tree. It's ridiculously hard to do when you don't get the nodes in order from the database, too, but that's a different problem.

How to remove a node apps listener from CRS.

We have a node apps in type of listener offline shown from crs_stat -t:
ldctrdb01|PDAMLDV11|/u01/crs/product/10.2.0/bin $ crs_stat -t
Name Type Target State Host
ora....11.inst application ONLINE ONLINE ldctrdb01
ora....12.inst application ONLINE ONLINE ldctrdb02
ora....LDV1.db application ONLINE ONLINE ldctrdb02
ora....SM1.asm application ONLINE ONLINE ldctrdb01
ora....01.lsnr application ONLINE OFFLINE
ora....01.lsnr application ONLINE ONLINE ldctrdb01
ora....b01.gsd application ONLINE ONLINE ldctrdb01
ora....b01.ons application ONLINE ONLINE ldctrdb01
ora....b01.vip application ONLINE ONLINE ldctrdb01
ora....SM2.asm application ONLINE ONLINE ldctrdb02
ora....02.lsnr application ONLINE OFFLINE
ora....02.lsnr application ONLINE ONLINE ldctrdb02
ora....b02.gsd application ONLINE ONLINE ldctrdb02
ora....b02.ons application ONLINE ONLINE ldctrdb02
ora....b02.vip application ONLINE ONLINE ldctrdb02
I want to delete it from the list by using netca. But this listener would not be able to show from netca. The netca can only show the other listener that is currently used and also shown in the crs_stat. How to remove the offline listener from crs_stat list?
Thanks for advice!

I run the netca from both $ORACLE_HOME and $ASM_HOME earlier. But now, none of the home can detect the listener to be deleted. However, if I try to add a listener with that name, the netca replied with " the listener already exist...".
We have a symbolic link from $ORACLE_HOME/network/admin to $ASM_HOME/network/admin ($TNS_ADMIN) for the files tnsnames.ora and listener.ora.

How to remove a node from a Jtree?

I tried giving this to move a node from one parent node to other parent node.
IconNodeClass userObject = (IconNodeClass)tr.getTransferData(TransferableDataItem.Image_Tree_Node_Flavor);
IconNodeClass node = (IconNodeClass)path.getLastPathComponent();
IconNodeClass newNode = new IconNodeClass(userObject);
DefaultTreeModel model = (DefaultTreeModel)getModel();
IconNodeClass oldParentNode = (IconNodeClass)userObject.getParent();
Object oldParent = oldParentNode.getUserObject();
Object newParent = node.getUserObject();
if(oldParent.equals(newParent)) {
model.insertNodeInto(newNode, node, 0);
if(oldParentNode != null) {
oldParentNode.remove(newNode);
model.reload(oldParentNode);
}

what happened next ?????

How to make parent node JCheckbox

How can I make the parent node in
http://www.java2s.com/Code/Java/Swing-JFC/CheckBoxNodeTreeSample.htm
to a checkbox.
Any help is greatly appreciated.
Regards,
Anees

See my example here: [http://forums.sun.com/thread.jspa?threadID=5180008&messageID=9699576]
If you have a specific problem post a Short, Self Contained, Compilable and Executable, Example Program (SSCCE) that demonstrates the problem.

How to remove parent keywords in photos?

Hi all,
I have started the laborious task to keywording my photos in Aperture 3, all 35,000+. I recently imported my photos folder into Aperture and will eventually restructure the library hierarchy based on keywords.
To help give me a kick start on keywording, I purchased the Controlled Vocabulary Keyword Catalog. This has been a big help. I still have had to add my own keywords. But, at least, I didn't have to start from scratch.
I eventually plan to do detailed keywording as I build out my keyword hierarchy. But for now I may use more general keywords. For example, I may assign the keyword "mammal" to a set of photos. Later on, I may add the keywords elephant, bear, beaver, etc. which are all have the parent keyword of mammal.
It would be very nice when assigning new keywords to photos for Aperture to be able to remove parent keywords from the updated photos. Is there a way to remove parent keywords from photos in Aperture either built-in or via plug-in or Apple Script?
PS: Yes, I know that specific keywords can be manually removed for individual photos a a group of selected photos. I am looking for a way to do clean up keywords in batch instead of manually doing this. Trying to save time.
Thanks!
Steven
null

Since you have two External Definitions and you are using both in on mapping hence your scenario becomes 1:N mapping scenario and this is the reason you are getting the additional nodes in your mapping.
so if your requirement is 1:N then whatever you are getting is correct, you can refer the below mentioned blog for help on this, But if you don't want the additonal nodes then you have to create TWO different mappings and used the external definitions seprately in each mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
I hope it helps...

How to remove parent nodes in an output XML?

Similar Messages

Maybe you are looking for