How to remove prefix namespace in Xml from XmlBean

I am trying to generate XML from XML Bean but i am getting namespace prefix in all my xml elements.
For example
<abc:Cutomer xmlns:abc="http://www.xyz.com/pqr>
<abc:Name>
I don't have this namespace prefix in my XSD (imported in Weblogic workshop).
Is there any way that I can remove this prefix from my xml elements?
Also, I don't need xml namespace in my xml string.
Is there any way that I can generate xml without having namespace?

Hello ,
I think this issue as been discussed earlier in this forum. Refer follwoing link..
http://forums.bea.com/bea/message.jspa?messageID=400000090#400000090
Regards,
Kuldeep Singh.

Similar Messages

  • How to remove element namespaces in XML file using DOM or SAX?

    Hi Guys,
    I developed a JAVA mapping in XI to add name spaces for XML file, after mapping,name spaces xmlns="http://www.mro.com/mx/integration" and xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" were added correctly, but for some nodes, such as <Header> and <Content>, a name space xmlns="" was added automatically.Please check below files to compare.
    It looks like be added automatically by XI. I didn't process anything for these nodes in JAVA program.
    Now the issue is, how can I remove these redundant namespaces? Such as xmlns="".
    Can I remove them using DOM or SAX in JAVA Mapping?
    Thanks in advance.
    ====>Original XML file
    <?xml version="1.0" encoding="UTF-8"?>
    <LLYLPPInterface language="EN">
       <Header>
          <SenderID>GBIP</SenderID>
          <CreationDateTime>2008-02-13T22:49:34-05:00</CreationDateTime>
          <RecipientID/>
          <MessageID/>
       </Header>
       <Content>
          <LLY-LPP>
             <INVOICE>
                <INVOICELINE>
                   <PONUM>4780000008</PONUM>
                   <POLINENUM>1</POLINENUM>
                   <INVOICEQTY>1</INVOICEQTY>
                   <LOADEDCOST>68</LOADEDCOST>
                </INVOICELINE>
             </INVOICE>
          </LLY-LPP>
       </Content>
    </LLYLPPInterface>
    ===>Target XML file after JAVA mapping
    <?xml version="1.0" encoding="utf-8"?>
    <LLYLPPInterface language="EN" xmlns="http://www.mro.com/mx/integration" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         <Header xmlns="">
              <SenderID>GBIP</SenderID>
              <CreationDateTime>2008-02-13T23:11:55-05:00</CreationDateTime>
              <RecipientID/>
              <MessageID/>
         </Header>
         <Content xmlns="">
              <LLY-LPP>
                   <INVOICE>
                        <INVOICELINE>
                             <PONUM>4780000008</PONUM>
                             <POLINENUM>0</POLINENUM>
                             <INVOICEQTY>1</INVOICEQTY>
                             <LOADEDCOST>68</LOADEDCOST>
                        </INVOICELINE>
                   </INVOICE>
              </LLY-LPP>
         </Content>
    </LLYLPPInterface>
    Edited by: Eddie Zhang on Feb 14, 2008 9:22 AM
    Edited by: Eddie Zhang on Feb 14, 2008 9:24 AM

    Hi Milan,
    Thanks for your replay.
    Actually when I used module XMLAnonymizerBean to convert namespaces, the header of XML, such as <?xml version="1.0" encoding="UTF-8"?> was converted to format <?xml version='1.0' encoding='UTF-8'?>, quote was converted to single quote. Although I set parameter anonymizer.quote = ", it still didn't work, single quote appeared instead of quote.
    I'm not sure why this happened. Can anyone help to clarify this?
    Thanks
    Edited by: Eddie Zhang on Feb 15, 2008 2:11 AM

  • How to remove "Other..." from my sign-in screen?

    How to remove "Other..." from my sign-in screen?
    I was trying to change an Administrator Account by starting from my Leopard Install DVD and from the Utilities menu choosing Reset Password, etc. A longish story involving my inability to shut-down the computer while others are signed in but not actually using the computer. In Tiger I was able, since moving to Leopard I need to go into each of their accounts and manually log each of them out. A headache.
    For right right now I need to get rid of the Other... account name, etc from my sign-in screen. How do I do this in plain English please? I find all this Admin jargon does my head in.
    Cheers, SZ

    V.K. wrote:
    You need to disable the root user. From what I understand you enabled it from the install DVD's password reset.
    Use [these instructions|http://docs.info.apple.com/article.html?artnum=106290] to disable it.
    Those instructions led me down this path, I have not the head to deal with them again today. My eyes glaze-over listening to myself read them aloud. SZ
    Message was edited by: ShakuZen

  • How to remove my credit card information from my icloud account?

    how to remove my credit card information from my icloud account?

    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918
     Cheers, Tom

  • TS3274 How to remove an old iCloud account from my IPad.  The account (email) was on my dad's name and he resently change it and now i can't  reset or delete his iCloud account without his password.  Please advise on the procedure.  Thanks.

    How to remove an old iCloud account from my IPad.  The account (email) was on my dad's name and he resently change it and now i can't  reset or delete his iCloud account without his password.  Please advise on the procedure.  Thanks.

    If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must use the previous owner's password to get permission to use the device. If you cannot get the password your father put on the iPad you will never be able to activate the device and no one can help you do it.

  • How to remove plug in ._v1_.swf from safari

    How to remove plug in ._v1_.swf from safari. Can't do it the usual ways.

    Please post the crash report.

  • How to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS

    Dear gurus,
    how to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS
    Arun

    Hi,
    Take a look:
    http://www.morganslibrary.org/reference/pkgs/dbms_audit_mgmt.html
    Regards,

  • How to remove the system data details from the overview tab in crmd_order?

    Hi All,
    How to remove the system data details from the overview tab in crmd_order?

    Hi,
    It is a standard functionality. Those information will be very useful when you send a message to SAP.
    If you still want to remove them, raise an OSS message.
    Regards,
    Rajesh Kumar

  • TS4147 How to remove all the duplicated contacts from ICloud?

    How to remove all the duplicated contacts from ICloud?

    If your Mac is syncing contacts with your iCloud account, open Contact on your Mac and go to Card>Look for Duplicates, then Merge the found duplicates.  These changes will be synced to iCloud.

  • How to remove a old iCloud account from the iphone

    I purchase a iPhone from somebody and the phone has been reset but the iCloud shows that he phone has reach it max numbers of free account to sign. So how I remove a old iCloud account from this phone. I do not have phone support so I am unable to get help from apple can anybody help me

    is there anyone there who can help or any type of subjection to this matter or am i the only one who has come accross this issue.

  • How to remove a broken charger nib from my iPad?

    How to remove a broken charger nib from an iPad?
    <Email Edited by Host>

    Was it the old 30-pin connector, or the new Lightning plug? There have been sporadic reports of the new connector snapping just ahead of the two side "dimples" that are used to hold it in place, but this would be the first time I hear of similar failure on the older and bigger connectors.
    If at all possible, I would suggest a visit to an Apple Store for free assessment. Else proceed with caution either with tweezers and/or a pin to nudge the fragments out. Maybe a review of the corresponding teardown of your model at IFixIt.com may help you visualize how to attack the problem.

  • How to remove special characters in xml

    Dear friends,
    How to remove the special character  from the xml. I am placing the xml file and  fetching through file adapter.
    The problem is when there is any special character in xml. i am not able to pass to target system smoothly.
    Customer asking schedule the file adapter in order to do that the source xml should not have any special charatcters
    How to acheive this friends,
    Thanx in advance.
    Take care

    Hi Karthik,
    Go throgh the following links how to handle special character
    https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken] [original link is broken] [original link is broken]
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
    Restricting special characters in XML within XI..
    Regards
    Goli Sridhar

  • How to add mulitple namespace in xml

    Hi,
    I have this output xml:
    <?xml version="1.0" encoding="utf-8" ?>
    - <E24B:E24B_Update_MachineCards_001 xmlns:E24B="urn:E24B_UpdateMachineCards_001">
    - <E24B:DataArea>
    - <E24B:UpdateMachineCards>
    - <E24B:Machine>
    - <E24B:Component>
      <f:ComponentSerNo xmlns:f="urn:fields">000000000000000456</f:ComponentSerNo>
      <f:ComponentType xmlns:f="urn:fields">108</f:ComponentType>
      </E24B:Component>
    - <E24B:Market>
      <f:FinalMarket xmlns:f="urn:fields">TR</f:FinalMarket>
      </E24B:Market>
      <f:SalesModel xmlns:f="urn:fields" />
      <f:SerialNo xmlns:f="urn:fields">000000000000000456</f:SerialNo>
    - <s:CntrolArea xmlns:s="urn:segments">
    - <s:Bsr>
      <s:Noun>Machine Card</s:Noun>
      <s:Verb>UPDATE</s:Verb>
      </s:Bsr>
    - <s:DateTime>
      <s:Dt_Qualifier>Creation</s:Dt_Qualifier>
      <s:Dt_Value>20111207</s:Dt_Value>
      <s:TimeZone>7200</s:TimeZone>
    But this content is wrong.
    The expected  content should be as follows:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <E24B:E24B_Update_MachineCards_001 xmlns:E24B="urn:E24B_UpdateMachineCards_001" xmlns:f="urn:fields" xmlns:s="urn:segments"  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <s:CntrolArea>
    - <s:Bsr>
      <s:Verb>Update</s:Verb>
      <s:Noun>Machine Card</s:Noun>
    Also xml content need to have multiple namespace. Can you help me please?
    Nurhan

    I used for target external definition and for  prefix (E24B  , f , s, instead of ns0, ns1..) i added module "AF_Modules/XMLAnonymizerBean".
    My source xml from  is
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_Machine_Update xmlns:ns0="http://xxx.com/MachineUpdate">
       <ControlArea>
          <Bsr>
             <Verb>13</Verb>
             <Noun>32</Noun>
          </Bsr>
          <Sender>
             <LogicalId>34124</LogicalId>
             <ReferenceId>124</ReferenceId>
          </Sender>
          <DateTime>
             <Dt_Qualifier>42</Dt_Qualifier>
             <Dt_Value>214</Dt_Value>
             <TimeZone>14</TimeZone>
          </DateTime>
       </ControlArea>
       <DataArea>
          <UpdateMachineCards>
             <CompanyCode>4325</CompanyCode>
             <CompanyName>325</CompanyName>
             <ManufacturerCode>352</ManufacturerCode>
             <ManufacturerName>53</ManufacturerName>
             <Machine>
                <SalesModel>24</SalesModel>
                <SerialNo>352</SerialNo>
                <EnvironmentCode>53</EnvironmentCode>
                <Market>
                   <FinalMarket>24</FinalMarket>
                   <NewCompanyCode></NewCompanyCode>
                </Market>
                <Component>
                   <ComponentType>23</ComponentType>
                   <PartNo>35</PartNo>
                   <Model>35</Model>
                   <ComponentSerNo>352</ComponentSerNo>
                </Component>
             </Machine>
          </UpdateMachineCards>
       </DataArea>
    </ns0:MT_Machine_Update>
    The output should be as follows:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <E24B:E24B_Update_MachineCards_001 xmlns:E24B="urn:E24B_UpdateMachineCards_001" xmlns:f="urn:fields" xmlns:s="urn:segments" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <s:CntrolArea>
    - <s:Bsr>
      <s:Verb>Update</s:Verb>
      <s:Noun>Machine Card</s:Noun>
      </s:Bsr>
    - <s:Sender>
      <s:LogicalId>CWL</s:LogicalId>
      <s:ReferenceId>2006-03-21T12:26:33</s:ReferenceId>
      </s:Sender>
    - <s:DateTime>
      <s:Dt_Qualifier>Creation</s:Dt_Qualifier>
      <s:Dt_Value>2006-03-24T14:29:46</s:Dt_Value>
      <s:TimeZone>+02:00</s:TimeZone>
      </s:DateTime>
      </s:CntrolArea>
    - <E24B:DataArea>
    - <E24B:UpdateMachineCards>
      <f:CompanyCode>428003</f:CompanyCode>
      <f:CompanyName>VOLVO ÉPÍTÕGÉPEK HUNGÁRIA KERESKEDELMI KFT.</f:CompanyName>
      <f:ManufacturerCode>CWL</f:ManufacturerCode>
      <f:ManufacturerName>VOLVO COMPACT W</f:ManufacturerName>
    - <E24B:Machine>
      <f:SalesModel>L45</f:SalesModel>
      <f:SerialNo>19521</f:SerialNo>
      <f:CurrentDate>20060323</f:CurrentDate>
    - <E24B:Market>
      <f:FinalMarket>HU</f:FinalMarket>
      </E24B:Market>
    - <E24B:Component>
      <f:ComponentType>17</f:ComponentType>
      <f:PartNo>11305947</f:PartNo>
      <f:ComponentSerNo>G070910121</f:ComponentSerNo>
      </E24B:Component>
    - <E24B:Component>
      <f:ComponentType>66</f:ComponentType>
      <f:PartNo>2814557</f:PartNo>
      <f:ComponentSerNo>100710021</f:ComponentSerNo>
      </E24B:Component>
      </E24B:Machine>
      </E24B:UpdateMachineCards>
      </E24B:DataArea>
      </E24B:E24B_Update_MachineCards_001>
    Thanks for your help

  • How to reduce the version of a pdf 1.7 to 1.5 & how to remove all the embedded xml form ?

    Hi Team,
        I am using adobe acrobat x pro. I have a pdf file of version 1.7 which showing embedded xml forms. I tried to remove all the 'embedded xml form' by  using Adobe Live cycle Designer ES2.  Then i tried to reduce the version by using Adobe acrobat x pro but it's still showing that there are some 'embedded xml form' for which it's not allowing me to reduce the vesion of pdf file in Adobe Acrobat x pro and also i want reduce the version of the pdf 1.7 to 1.5. Can you please guide me the step to reduce the pdf file version and how to remove the embedded xml form from the pdf file ?

    If the PDF is the same one from the link in your post here:
    http://forums.adobe.com/thread/1174643
    That PDF being protected may have something to do with why you cannot do what you'd like to.
    Be well...

  • How to remove folder and leaf icons from a tree

    Hi,
    I know how to remove when we have a mx component i.e.,
    <mx:Tree folderOpenIcon={null} ...../> similarly for
    closed and default leaf icon.
    But how do i achieve this from an action script like say i
    have,
    var tree:Tree = new Tree();
    tree.setFolderOpenIcon(null); ///is there something like this
    or any other alternative.
    Please advice.
    Thanks,
    Lucky

    the folderOpenIcon is a style so you have to set it with the
    setStyle method
    try:
    tree.setStyle("folderOpenIcon",null);

Maybe you are looking for