How to remove Priority "!!" when replying -- ?

How do I strip out "High Priority '!!' " when replying? I don't even want "-". They are all just so annoying.  Thanks.Re

Hi JSage,
If you receive an email with a high priority level, when you reply to the message, you can change the priority level to normal from the Message command in the menu bar.  That will remove the exclamation marks.
By default, email messages are sent as Normal priority (no exclamation marks).
The article below is for Mavericks, but the command should be applicable to all versions of the mail application.
Mail (Mavericks): Set the priority of a message
https://support.apple.com/kb/PH14897?locale=en_SA
Cheers,
Judy

Similar Messages

  • How to remove ^M when open with vi

    Hi All,
    O.S is SUN 5.10
    below is .sh file which i need to run but when i opened it with vi it shows ^M, so how to remove this , please suggest.
    ORACLE_SID=test^M
    . oraenv^M
    ^M
    sqlplus /nolog << EOF^M
    conn / as sysdba^M
    ^M
    set echo on^M
    set heading off^M
    set timing on^M
    set serveroutput on^M
    set timing on^M
    ^M
    spool FUL_.SQL.OUT^M
    ^M
    ALTER SESSION ENABLE RESUMABLE;^M
    ALTER SESSION SET RESUMABLE_TIMEOUT = 10800;^M
    alter session set current_schema=partd;^M
    ^M
    @FUL_.SQL^M
    ALTER SESSION DISABLE RESUMABLE;^M
    spool off^M
    EOF^M

    [email protected] wrote:
    Hi All,
    O.S is SUN 5.10
    below is .sh file which i need to run but when i opened it with vi it shows ^M, so how to remove this , please suggest.
    ORACLE_SID=test^M
    . oraenv^M
    ^M
    sqlplus /nolog << EOF^M
    conn / as sysdba^M
    ^M
    set echo on^M
    set heading off^M
    set timing on^M
    set serveroutput on^M
    set timing on^M
    ^M
    spool FUL_.SQL.OUT^M
    ^M
    ALTER SESSION ENABLE RESUMABLE;^M
    ALTER SESSION SET RESUMABLE_TIMEOUT = 10800;^M
    alter session set current_schema=partd;^M
    ^M
    @FUL_.SQL^M
    ALTER SESSION DISABLE RESUMABLE;^M
    spool off^M
    EOF^MWell, this isn't an oracle question ... but ...
    What you are seeing is the result of moving a text file from a dos (windows) platform to a nix platform without proper translation.  In dos, two characters are used to indicate end-of-line.  they are the control characters for Carraige Return and Line Feed (x'13' and x'10').  In nix, only one character. I can't remember if it is the x'13' or the x'10'. Normally, when a file is copied from one platform to another, the copy utility will recognize this and make the proper modification to the file. However, if you ftp the file in binary mode, no translation occurs. Of course, you can ftp in text (ascii) mode only if it is a text file to begin with, so you can't do this with a zip file.
    As already given, there are ways to use vi substitution commands to fix it after the fact. You can also use the utility 'dos2unix' to fix the file after it has landed on the *nix platform. (the actual name of the file may be a variant on the theme of 'dos2unix'.  You may have to google a bit to find it on your OS).                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • BUS2105 How to change priority when PR is urgent

    Hello,
    We activated BUS2105 for overall release of PR. We use three level release procedure. Our business people want when requisitioner decides that PR is urgent he to be able to change priority of Workflow message. Is it possible or not?
    Thank's

    Hmmm, as far as I know, it is possible to change the priorities (for example go to business workplace and change a priority of a work item manually. Well, there might be some problems according to the note in certain cases.
    IF the original question is that how the requestor can change the priority (and if we assume that the WF priority change will work), I would say that it is not that simple. I assume that the requestor should somehow be able to set the priority already when he saves the PR. You should find probably some user exit or BADI or do some enhancement  for the PR itself - to store the priority that the user should be somehow able to choose. Then it would perhaps be quite easy in WF to check this value and change the priority with function SAP_WAPI_CHANGE_WORKITEM_PRIO.
    Regards,
    Karri

  • How to attach Documents when replying to an Email.

    I have found ways to add attachments such as Word Docs when I create new Emails (third party app), but can’t seem to find a way to add an attachment when I am replying to an email sent to me.  Is there a way to do this in the native app or does someone know of a third party app capable of this.  I have been looking for a while and have found no way to do this, which I consider very basic functionality in an Email client.
    The scenario is that I was on the road and a recruiter sent me an email requesting a copy of my resume.  I had it in Word format on the phone (third party app), but there was no way to add the Doc to my reply. The third party app only allowed outbound emails.  I could not view/reply to an inbound email from the app and the native client did not seem to have a way to add attachments (except an image). This was a nuisance because the only way I could work around this was to create a new Email with the attachment, save it as a Draft and copy everything from his email peace by peace into the Draft before sending it.  This also required adding him to my contacts, because I could not copy his address out of the client to paste into the draft.
    Note: I also tried copying the contents out of the draft into my reply.  This looked at first like it would work but what the recruiter received was a word icon, instead of the actual document I had attached to the draft.

    that's impossible, sorry. the best you can do is set up a fancy signature which will also function as a stationery template.
    Message was edited by: V.K.

  • How to remove sound when a take a picture

    i want to remove de sound of my phone when a take a picture

    It's not legal to shut off the shutter sound in many countries. If it still makes the sound with the mute switch on, then it can't be disabled on your phone.

  • How to remove sites when right-clicking Safari in the Dock?

    Right clicking Safari in the Dock shows 3 sites visited awhile ago. There is a diamond shape before each. And each is repeated several times, 16 for one. I've cleared History, closed Safari, removed it from the Dock, restarted Safari. they're still there. Opening them and deleting just increases the amount.
    I'm stymied.
    Any help would be appreciated.

    I've resolved the issue myself.
    First, let me clarify, each of these "sites" had several tabs.
    Here's what worked: by Option-clicking on one closes all other tabs. Of course this can be done manually, closing each tab separately.
    Once all but one tab is showing click the "close", red circle, button and the site deletes from the Safari list in the Dock.
    Not sure why this anomaly happened but I know how to fix it if it should happen again.
    Tricia

  • How to remove customization when fail to entry customization region.

    I make a customization to a region, but this customization make the page fail, that the page can't show the region.
    Then, how can I remove the customization for the region.
    Thanks.

    Sumury,
    1) Profile Option : Personalize Self-service Defn
    Value : Set to "NO"
    This will disable all the personalizations in the application done.
    2) begin
    jdr_utils.deleteDocument('/oracle/apps/apps...../site/0/...PG');
    end;
    Note - Don't forget to commit.
    Regards,
    Gyan

  • How to remove logo when printing a PDF without editing

    I need to recover pdf Document Management System that contains a logo and would like to remove the logo. Is there any way to remove it without editing the PDF?

    You can create a new layer that you can have the logo appearing on, and change the properties of the layer 'Not to print', then delete the layer from the base.
    I am working on the assumption that the logo is selectable on its own, you have permission to change the PDF....if not, I can't think of how you can remove something without editing it...

  • How to remove iCloud, when...?

    Hello,
    I cannot remove my iCloud, because Apple is no more sending me e-mails "how to change the password" after too many attemps to try to solve this problem. I cannot sign in without the new password. And I think if I could, I could also remove the whole iCloud and make a new with the right apple id. Ellimatilda

    To change your password you need to go to http://appleid.apple.com and click on 'Reset password'. A new password will be sent to the associated email address, assuming there is one.
    Failing that, go to https://expresslane.apple.com ; select 'All Products and Services' in the first column, 'More Products and Services' in the second column, then 'Apple ID' in the third column. In the next page select 'Other Apple ID Topics' in the first column then 'Lost or forgotten Apple ID password' and click 'Continue'. You will be offered options to contact Apple by phone.
    To abandon the account altogether (and its contents) simply sign out in System Preferences (or Settings)>iCloud and sign in with the new account you will need to to create.

  • How to remove pages when combining 2 pdfs into a single document?

    I renewed my subscription to Acrobat for $89.99 in order to combine 2 pdf documents while removing a page from one. I used to be able to select the pages from a document prior to combining the 2 documents. Now there does not appear to be an option to select pages for combining... What am I missing?

    You said in your first message that you subscribed to Acrobat. Our replies were about Acrobat. Indeed, PDF Pack doesn't enable any of those things.

  • How to remove eventreceiver when handling AppUninstalling in a RER without getting access denied

    I am trying to remove an eventreceiver from the clientContext.Web.EventReceivers
    by using DeleteObject() but I am getting Access Denied exception
    In my appmanifest.xml I already granted full control to the app
    Within my AppEventReceiver I have:
    if (properties.EventType == SPRemoteEventType.AppUninstalling)
                    SharePointContextToken contextToken = TokenHelper.ReadAndValidateContextToken(properties.ContextToken, OperationContext.Current.IncomingMessageHeaders.To.Host);
                    string appOnlyAccessToken = TokenHelper.GetAppOnlyAccessToken(contextToken.TargetPrincipalName, properties.AppEventProperties.HostWebFullUrl.Authority, contextToken.Realm).AccessToken;
                    //string appOnlyAccessToken = TokenHelper.GetAppOnlyAccessToken(SHAREPOINT_PID, properties.AppEventProperties.HostWebFullUrl.Authority, TokenHelper.GetRealmFromTargetUrl(properties.AppEventProperties.HostWebFullUrl)).AccessToken;
                    using (ClientContext clientContext = TokenHelper.GetClientContextWithAccessToken(properties.AppEventProperties.HostWebFullUrl.ToString(), appOnlyAccessToken))
                        try
                            clientContext.Load(clientContext.Web);
                            clientContext.Load(clientContext.Web.EventReceivers);
                            clientContext.Load(clientContext.Web, web => web.Title);
                            clientContext.Load(clientContext.Web, web => web.CurrentUser.LoginName);
                            clientContext.ExecuteQuery();
                            //IEnumerable<EventReceiverDefinition> receivers = clientContext.LoadQuery(clientContext.Web.EventReceivers.Where(e => e.ReceiverName == "GroupUserAddedRER"));
                            //clientContext.ExecuteQuery();
                            EventReceiverDefinitionCollection receivers = clientContext.Web.EventReceivers;
                            List<EventReceiverDefinition> receiversToDelete = new List<EventReceiverDefinition>();
                            foreach (var rec in receivers)
                                if (rec.ReceiverName == "GroupUserAddedRER")
                                    receiversToDelete.Add(rec);
                            foreach (var recToDelete in receiversToDelete)
                                recToDelete.DeleteObject();
                            clientContext.ExecuteQuery();
                        catch (Exception)
                            result.Status = SPRemoteEventServiceStatus.CancelNoError;

    Hi,
    Check you manifest.xml
    You must have the property AllowAppOnlyPolicy
    to "true" like below, to use the "GetAppOnlyAccessToken" method
    <AppPermissionRequestsAllowAppOnlyPolicy="true">
             Rights of your app...
    </AppPermissionRequests>

  • How to remove duplicates when serializing?

    hi,
    I think this has been asked before but have not been able to find the answer in the forums or google..
    I'd like to save space when serializing a structure to disk, as the storage medium is slow and it is expensive to deserialize large objects. I know that the thing I'm serializing has the same object duplicated in it several times and that its being written out several times.
    is there any way to do this (3rd party libraries etc..)?
    ideally you'd also be able to configure whether objects are duplicated or not by identity or .equals equality?
    thanks,
    asjf

    hi,
    I think this has been asked before but have not been
    n able to find the answer in the forums or google..
    I'd like to save space when serializing a structure
    to disk, as the storage medium is slow and it is
    expensive to deserialize large objects. I know that
    the thing I'm serializing has the same object
    duplicated in it several times and that its being
    written out several times.When you say "same," do you mean by identity or by equals? I'm pretty sure that serialization by default does not duplicate the same object (by identity). If you want to avoid serializing "same by equals" you'll probably have to roll your own, overriding readObject/writeObject or whatever methods the docs say to override for custom serialization.
    Be aware though, that "same by equals" doesn't really mean the objects will behave the same way. I'd be very careful using that.

  • How to remove timestamp,when i select calendar date(input Controls)

    Hi everyone
    I am using webi 4.0
    My problem is when i select calendar date(input Controls) i am able to display time stamp along with date in input Controls(MM/dd/yyyy 12:00:00 AM)
    i want to change (MM/dd/yyyy 12:00:00 AM) to (yyyy-MM-dd ), when i select calendar date(input Controls)
    where is the calendar date(input Controls)' format setting??
    i dont want to show the time stamp in calendar date(input Controls) as my users dislike to see that timestamp .
    Thanks & regards

    Hello,
    Can you show us the declaration of the internal table rec?
    Vikranth

  • How to remove priority number 5?

    Hello everybody,
    I have the following problem: in the fast entry screen of a change request I want to delete priority number 5 as the company I'm working for only has 4 priorities.
    I now have an empty priority:
    5:  
    My collegue seems to think there is a note for this, can anyone help me with this?
    Thanks.

    Hi,
    I checked the setting and found you can follow note 964598 to configure
    priorities in solution manager.
    I hope this is helpful.
    Regards,
    Aidan

  • How does pacman know how to remove packages?

    I've been looking at the 'Creating Packages' page, and it says to create a pkgbuild I only need to specify the build function. My question is... how does pacman know which files to remove when you do pacman -R? Does it keep track of all the files that were installed via build()?
    Second question: How do you guys keep track of packages that weren't installed via the AUR? For example, if you want to hack on a project and use that hacked copy instead of the one available in the repos, what do you usually do? I'm guessing that I should let pacman keep track of those by creating pkgbuilds for them, naming them something like [packagename]-[version]-myown, and noting that it conflicts with the package in the Arch repos... is this correct?

    When you build a package with makepkg, the build function is responsible for installing the files that will be contained in the package under ${BUILD_DIR}/pkg. That directory will be tar'ed and compacted to make your final package. When you install it with pacman, will be created the file  /var/lib/pacman/local/<name of your package>/files which will list all the files owned by your package. So pacman can know how to remove them when you ask it to be deleted.
    About your 2nd. question, you are quite right. The only correction is that the name of your new package should be something like "package-myown-version". You should put the old name in the conflicts and provides directive of the PKGBUILD. You should read the wiki about ABS. With it, you can get a copy of all PKGBUILDS for your current repositories, so you can change what pleases you more.

Maybe you are looking for