How to remove Queries in menu roles?
Hi,
I am removing unneccessary quries added in menu roles!
How to remove those queries from the roles?
Raj
Hi,
Open your role in PFCG with edit mode -> you can see list of reports assigned here, right click on delete which is not required.
Similar Messages
-
Remove queries from Portal Roles
Hi,
We have a requirement in the portal and BW queries.
We want to remove queries from the portal roles. That is the queries must not be physically deleted, but they should not appear in the portal when viewed through Business Explorer.
Is this possible with in the portal. How can this be done?
Regards,
SujanaHi
Go to TCode
PFCG.
Enter the role in which the query is assigned.
Then go to the Tab menu,
Select the name of the report or Query.
Remove the entry from the role.
This will do what you need.
Its in BW side not in R/3.
Regards
M.A -
How to remove default "Home" portal role from every portal user
Hi
My Portal system is configured on our BW UME.
When ever I create a Used ID in BW,A portal account is created for the same user id.
With out any portal roles (navigational) assigned to the user.
Ex:
Lets say I created a user u201CTesteru201D in BW and assigned him the relevant BW Roles (ABAP).
When I logon to Portal using u201CTesteru201D, I can see a TAB u201Chomeu201D under which worksets Company,Work,Teams,Documents and Portal Information
I checked the user account in Portal for tester there are no portal roles assigned to himu2026u2026.
My requirement is not to display Home (tab)u2026.how can is that Home is assigned to all portal users and how can I remove it so that the users will be displayed with only navigational role that I assigned.
ThanksHi,
In User Admin of Portal search for eu_role and see check assigned users and assigned groups tab and see if this is added to the users or group.
If you find it assigned to any users or any group delete the assignment and it should be gone.
Hope this helps.
Cheers-
Pramod -
I have a menu with role security enabled. If I grant one of
these roles to a pre-existing user, everything works fine.
However, if I grant it to a brand new user I get "FRM-10256 User
is not authorized to Run Form Builder Menu". (Note that all of
the forms, menus etc are held in the file system).
I have definitely granted the right role. What is going on
here?
Thanks
Chris
nullThanks.
Chris Rimmer (guest) wrote:
: John,
: Don't worry, I already answered my own question! To use menu
: role security:
: 1) Ensure that the view SYSTEM.FRM50_ENABLED_ROLES exists. If
: not, you will need to run a script (FRM50SEC.SQL I think) to
: create it. I also advise that you grant SELECT on this view
to
: PUBLIC, to avoid the problem that I encountered.
: 2) Create the roles to be used, if they don't yet exist.
: 3) In the menu module, set the "Use Security" property to TRUE
: and add the roles to the "Module Roles" list.
: 4) For every item in the menu, you must now make a selection
in
: the "Item Roles" property to decide which roles can access the
: item.
: 5) Make sure you compile the Menu Module. Done.
: Chris
: john (guest) wrote:
: : Hello Chris,
: : I don't have the answer, sorry. I would like to ask you for
: : your help on creating menu role. How can I create a menu
role
: : then grant it to users specificly? Thanks for you time.
: : john
null -
How to remove transaction that was added under Menu - Role Menu
We have roles that we need to remove some transactions.
These transactions were added under Menu - Role Menu and expanded for ex: Logistics and Picked Miro transaction.
When I go to PFCD and check under s_tcode I cannot remove Miro transactions since it's grayed out.
The only way to remove this is to go back to the Menu and do a find on miro and work through the menu until I get to Miro transaction and then delete it.
Is there another way to accomplish this.
Thanks
JoeThis is the intended way a role built from a menu works. What might be the use of an authorization without any corresponding transaction to start it? It is only a risk...
Unless of course you know better or design differently and don't make the effort to adjust SU24, then you can insert manually or cause "changed" authorizations, but PFCG will not look at it from a "your own fault" view and not adjust it or protect it against illogical changes.
To use the discipline of the one approach but keep the flexibility of manual authorizations is not possible for S_TCODE, S_RFC and S_SERVICE objects (the entry points).
Cheers,
Julius
PS:
> Total Questions: 42 (36 unresolved)
Please follow-up on your unresolved questions. There is a limit now of 10 open questions asked since July 2008. -
Hi All,
How to identify the menu roles been awarded for the BW queries.
Is there any transactions to find out.
Thanks with reggards,
Vinay H.Syou can check in the meta data repository.
Here you can get the roles to which the particular query is assigned to. -
How to remove options in context menu of the task in UWL.
Hi,
How to remove options or customize the context menu of the task in UWL.
I have 4 options(Edit,Remove,Forward,Resubmit) is appearing in the context menu.
My requirement is to delete Forward option form the menu list and only 3 options
should appear in the list.
Can anybody suggest where to change?
Thanks,
VikasHi vikas,
Go to System Admin ->System Config->UWL Admin.
select your system alias.
Click on Click to Click to Administrate Item Types and View Definitions.
Select your UWL configuration.
Download DTD as well as XML file through Download Configuration.
Then you can edit the xml file using XML spy editor or anyone.
to upload go back to the same page and select the tab...Upload new configuration.
Do not forget to clear the cache after upload.
Hope this helps you.
Regards
Atul Shrivastava -
So with three separate builds of WTP I've run the PowerShell command to remove Metro/Modern/Universal/Windows Apps. With each build, it also removes the Start Menu. In the thread below, an MS Support person mentioned that that command was only for Windows
8.x and shouldn't be run on WTP. What? Then why is that command still available? And, why will it remove some Metro/Modern/Universal/Windows Apps, but not others? Are they marked as System required? Why isn't the Start Menu marked as System required? You'd
think that the start menu would be pretty important.
https://social.technet.microsoft.com/Forums/en-US/053f63bc-c174-44f1-8f6c-8ead1ad965fb/spartan-and-start-menu-on-10049?forum=WinPreview2014General
So, with the start menu being an XAML app, how do I safely remove ALL Metro/Modern/Universal/Windows Apps without removing the Start Menu? I have no use for them and don't want them on my computer. Period. There has to be some command like the one we used
in Windows 8.x that will allow use to remove ALL Metro/Modern/Universal/Windows Apps without removing the Start Menu.
Don't give an answer like "just right-click and uninstall". That doesn't work for all of these things, and do you know how long it takes to do that for all of those silly things? Too long! That's also not practical for an Enterprise desktop. It's
also not practical to leave all of that junk on the desktop, so don't suggest that either.
DanThe problem with PowerShell and all of those scripts is that those particular scripts require a lot of typing, or copy and paste, or having to figure out where all of those apps are stored and then insert their convoluted names into the script. For
me, scripting is like programming. I have no desire to be a programmer/developer.
I just want an option in Programs and Features to be able to turn these "features" off. We were able to do it in previous versions of Windows. If we didn't want Internet Games, we uncheck the box. If we don't want our users to be able to print
documents over the Internet, we uncheck the box. And so on down the line for any other "feature" we didn't want our enterprise users to have.
Or, we could turn those features off using the System Image Manager. Now we have to write some convoluted script with even more convoluted commands for even more convoluted names for things we don't want.
The easier script in Windows 8.x was just get-appxpackages -online | remove-appxpackages. That removed the majority of the apps for an individual user. The remove-appxprovisionedpackage command, with the convoluted name of the app, would remove them from
the hard drive - one app at a time, but that doesn't work in Windows 10.
So, they came up with a DISM command, but that doesn't work in Windows 10 either. I should say that with my limited developer skills I haven't found a way to make it work.
Again, I have no desire to be a developer/scripter. They are the same thing in my book. I'm a systems engineer. I do operating systems, not write applications.
Dan
So, I guess there is no real answer to this question. -
How to remove empty space in CSS table and move spry menu bar?
Hello! I created www.stonecreekha.com about a year ago basically by watching youtube tutorials and haven't done much with it since so I've forgotten everything! In IE7, everything appears as it should; but in Firefox and IE8, the spry menu bar is positioned slightly higher than it should be (it slightly cuts off the foot of the golfer) and there is an empty space between the navigation bar and the photo. The source code can be viewed from the website. Here are some pics:
IE7 - how it is supposed to look:
IE8:
Firefox:
Dreamweaver:
So basically, I need to know how to remove that empty space between the navigation bar and the picture, and how to move the spry menu bar down a few pixels, in a way that it looks correct in IE8 and Firefox, and preferably IE7 as well.
P.S. I'm a noob so if you could be as specific as possible on what to do in Dreamweaver I'd really appreciate it. ThanksI belive it's because of the -minus margin being used on the navbar, that you will need to use a negative margin to bring up both the left and right bodyArea divs.
Try : margin-top: -18px; on both divs. You may need to play around with that to get it more precise.
Again, not sure what effect that has on IE as I can't test it.
If it affects IE, then you may need to feed IE a conditional comment for the placement of those divs. -
How to remove the worksets from the Top level navigation for the ESS role.
Hi All,
I am working on enabling and disabling certain services in the ESS worksets.
we are using EP 7.0, ECC 6.0 (NW2004s).
When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
Thanks for your help
Regards
SMHi,
Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property. -
How to remove airport status from menu
Hi,
due to an error within my brain.app I forgot to switch off the "show airport status in menu" before using the migration assistent.
But the new Mac has no airport, Doh!
Now I am unsable to remove the icon from the finder menu. Am I?
Any hints how to remove the icon?Glad it worked! Thanks for the !
-
How to remove an ActiveX ctl from menu?
Currently in my "Select ActiveX Object" window (from right clicking on an
ActiveX container ->insert ActiveX object) I have several garbage controls
that i made to test some code and block diagrams
As such, several copies of the same ActiveX control are in the menu
Does anyone know how to remove these controls from the menu?
(and how did I added them in the first place?)
Also if anyone can point me in the direction of some good resources regarding
ActiveX objects and Labview, it would be greatly appreciatedYou need to unregister the ActiveX:
The command to manually register or unregister an ActiveX component is:
C:\WINDOWS\SYSTEM\REGSVR32 filename
or
C:\WINDOWS\SYSTEM\REGSVR32 /u filename
Then delete filename.ocx or .dll
"Phil" wrote in message
news:[email protected]..
>
> Currently in my "Select ActiveX Object" window (from right clicking on an
> ActiveX container ->insert ActiveX object) I have several garbage controls
> that i made to test some code and block diagrams
> As such, several copies of the same ActiveX control are in the menu
>
> Does anyone know how to remove these controls from the menu?
>
> (and how did I added them in the first place?)
>
> Also if anyone can point me in the direction of some good resources
regarding
> A
ctiveX objects and Labview, it would be greatly appreciated -
F-menu bar buttons partially visible. How to remove bar?
The system comes with a menu bar for the F-key functionalities. By moving mouse pointer to top of screen, it appears. I cannot seem to find out where I can uninstall og disable this annoying bar. It looks like a software error when it's not used. A small line of the buttons are visible and it irritates me. Help me how to remove, please?
Hi
I think you mean the Toshiba Vista FlashCards.
The FlashCards controls the FN buttons and if you want to use the FN buttons I would not recommend removing it from the operating system.
If dont want to use this tool then you could disable it in:
Programs Toshiba - Utilities Toshiba FlashCard settings
Hope this helps.
A feedback would be appreciated -
How can I remove the "shared" menu in the finder?
Hey Folks,
I hope my question makes sense - have a look at my screenshot: http://i11.tinypic.com/717nkhf.png
how can I remove that "shared' menu, I don't know its there and I would like to take it out please.
thanks.
-JoeyHey Matt...
When I select it, it's blank.. nothing's in there... I think I first saw that when I used my laptop @ a hotel I had to connect through a ethernet cable and there was a bunch of networks... but now I am back in my office and just connecting to my wirless connection called "rhino's" (thats' the name of my company)
So I'm not sure why the "All" is there.. and when I click on it, it doesn't show any network...
Hope its not too confusing mate.
Thanks,
-Joey -
How to remove icons from the menu bar
Hi,
I've read all the other ideas on how to remove or re-arange them ( CMD - drag off etc ), well none of this works for me !!
I have a Macbook Pro running 10.6.7. So does anyone have any ideas please
SteveUsually the apps belonging to these icons have an option that allows you to hide the Menu Bar icon by allowing them to run as an app in the dock. However, certain applications like Caffeine must show their icons as otherwise you wouldn't be able to access them.
For example, Dropbox doesn't allow you to remove its menu bar icon:
Maybe you are looking for
-
Using a German iTunes account in an US iPad possible?
Thanks for your help community!
-
Exporting from Keynote - audio/slides no longer in sync
Well after researching this, it seems there is no answer to my issue, but I thought I'd ask anyway. I have set up a Keynote presentation using Smart Builds. I have four slides. Each slide has approximately 40 pics and one song. The timing of the pics
-
Using the Widget Browser | Learn Dreamweaver CS5 & CS5.5 | Adobe TV
Add site functionality with ease by using the new Widget Browser. Set up and install the Widget Browser, explore Adobe Exchange, Adobe's new community-based online resource for widgets, and see a sample integration of a slideshow widget. http://adobe
-
Downloaded Files don't write on external disc once completed
Hi, Ever since the last two itunes update (v.10.2.2 & 10.2.1) I had some problems with the podcast & apps from saving to an external disc. I've used the same setup without any problems for over 6 months but for about a month or two I've start to have
-
Run subVIs in parralel and simultaneously
Hello, Using LabVIEW 8.5 in WinXP 1.6Ghz, 1GoRAM I'm doing measurement acquisition using two agilent 66319B DC source and the driver AG663xxx. I just want to run the two measurements simultaneously from my template subVI that control the two DC Sourc