How to remove reference to workgroup?

After manually upgrading OS on my Air, it will only work in "Safe mode". I bought my Air from previous employer, it was set up as part of "Workgroup", and there are lots of references to that workgroup. I'm not sure how to remove all these references.
For instance: the "Software update" in the apple menu, points to an domain controlled by previous employer.
Any advice welcome

The workgroup has nothing to do with your air not working in a normal boot.
You need to completely wipe the drive then reinstall OS X and programs. You need to remove all references of your employer and the only way to do that is to wipe the drive and reinstall everything clean.

Similar Messages

Does anyone know how to remove references to facebook and Twitter from the settings and "share" feature screens?

I don't use facebook or Twitter and I shouldn't have to see references to them in the settings section or the "share" dropdowns of Safari, the photo management screens, or anywhere else. Can anyone tell me how to remove these references?

To the best of my knowledge you can't.
You can try going into the settings and restrictions and turn them off and see if that makes the icons disappear (probably won't) but there's no way to select the icons you want.

Audio Unit Manager: How to remove references to deleted files?

I upgraded my NI software. Replaced Guitar Rig 4 with Guitar Rig 5.
Removed the Guitar Rig 4 components from both system and user Audio/Plugins/Components
directories.
The now-removed plug-ins are still showing in Logic's Audio Unit Manager. Of course they fail validation,
and aren't used. But, leaves a messy listing, and causes other programs (Live, Kore) to also list them try to valid,
and fail.
Any ideas on how to remove these references??

I would love to know this too. I have the worst plug in in the world ( Universal UVI Player) haging around my system although I removed it from all "visible' places.

How to remove reference line measurements on Walls drawn in VISIO

HI, I have Visio 2007 and we draw pictures using walls, recently I have found that walls all have refernece line with the measurement of the wall displayed. I can not turn this reference line off, so when they print every wall has a measurement next to it.
I have tried the Set Display options, I have tried line properties. Nothing seems to work.
HELP PLEASE, this is driving me crazy and I can not get work sent out to clients with these measurements all over them :-(

Paul -
This is the only way? Reason I ask is when multiple lines are selected, it doesn't fix the problem. I have to select each line individually.... I have a building floor plan I'm working with so as you can imagine it is taking forever
Select the main wall shape in your drawing, now menu Window -> Show Shapesheet
and scroll down to the User-defined cells section, there you will find a cell called User.visBESelected.
In the Value cell type:
=guard(0)
-- Paul Herber, Sandrila Ltd. http://www.sandrila.co.uk/ Engineering and software shapes for Visio.

MMTracking.swf - how do I remove references to it?

Hi there,
I've just built a course in Captivate 5 for a client, who has now uploaded the course to their LMS.
The course includes a button on the last page which has a score of 1 attached to it. This score is being used to set a pass/fail for the course. You can only reach the last page if you have been through every page of the course. I've tested the course in SCORM Cloud and it worked perfectly in that site.
My client has reported that the course is not acting as expected in their LMS, because the course is looking for a file called ‘MMTracking.swf’ when it is opened. This file is not included in the published course files.
I've read through the Forum and have read a number of times that this file is not needed and the course should work in an LMS regardless of this file. A number of posts suggest removing references to it. I'm not sure how to do this.
So I want to know why the course references is at all? And how do I safely remove references to it?
Thanks in advance
Beck

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
You do not have the activation lock since that is only on iOS 7 and only the 5G can get iOS 7

How to remove magicjack plus osx 10.7.5

Hello,
I am new to Mac and I am not a Unix system programmer.
I purchased a MagicJack Plus for my sister and I set it up using my new iMac for her. Now I would like to remove the setup software from my iMac as I do not like to leave extraneous software on my machine. Also, MagicJack seems to be even more clueless than me, which I find VERY disturbing.
I. I viewed and attempted to execut instructions outlined in "How do I uninstall magicJack from my computer?" on MJ wesite as follows:
Download CompleteUninstall.sh. After the download is complete, open a terminal window by navigating to /Applications/Utilities/Terminal.
In the Terminal Window, navigate to your download directory (usually Downloads) by typing cd Downloads and pressing enter. Next, type chmod+x CompleteUninstall.sh and press enter. Now type ./CompleteUninstall.sh and press enter again.
For reference the CompleteUninstall.sh script contains the following:
#!/bin/sh
# instalator files
rm -rf ~/.magicJack
rm -rf ~/MJInstlogs
rm -rf ~/Desktop/Start\ magicJack.app
# softphone files
rm -rf ~/Library/Preferences/magicJack
# WebKit cache
rm -rf ~/Library/Caches/magicJack
II. This is results:
Last login: Tue Apr 23 11:36:11 on ttys000
Larrys-iMac:~ ldwalker$ cd Downloads
Larrys-iMac:Downloads ldwalker$ chmod+x CompleteUninstall.sh
-bash: chmod+x: command not found
Larrys-iMac:Downloads ldwalker$
The change ownership command failed, I presume because the path to the Unix Commands directory is not set? If so, how do I set it and then reset everything back to current defaults?
Thanks in advance for any help you can provide!

baltwo,
Thanks VERY much.......this solved my problem.
I just cut and pasted the command into my terminal session. I assumed the format was correct as the exact same command set format was used on several different web sites giving instructions on how to remove the magicjack software.
Amazing how incorrect info gets propagated around the web!

How to remove links pointing to the same page?

I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, Windows

Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

Dead links - not another "how to remove them" thread

I know this question has been answered a few times but the question is not a "how to remove them" or "what do they mean" question.
I would like to know how this happens other than changing the file directory or information outside of iTunes. Here is a couple things I could think of that I would like some input on.
1. All of my songs that have a ! by them were downloaded off of the internet for free (no shareware, just an actual web site).
2. These songs were already in mp3 format prior to importing them.
3. I made a copy of my iTunes folder on another harddrive, but still run iTunes from the orginal drive.
4. Since I have 2 copies of iTunes song files, I deleted the original source of these files in My Music, which were in WMA format.
Again, I did not change the file information to any of these songs. Any help would be great! Thanks!

Thanks for the information.
This is where you created the '!' links:
"I have 2 harddrive in my PC. "C" is my main drive and "D" is my backup drive. iTunes stores everything on my C drive. I copied this iTunes folder (including songs, playlist info, etc) and pasted it on my D drive."
iTunes operates as a database of information for your music files. The actual music files are stored on your PC, not within iTunes. iTunes keeps absolute references of the music file location and other information in its database file. This allows iTunes to use music files from any location on the PC: different directories/folders on the main HD, another internal drive, an external drive, or a network drive (or any combination of the above). Each song reference has a specific and hardcoded path so iTunes can find and play (or sync) it. Move the file, change the path, re-map the drive it is on, and iTunes will lose the file (giving you the '!' of a ‘Broken Link’). Lose, move or corrupt the ‘iTunes Music.itl’ file and your complete Library will ‘vanish’.
Changing (or designating) the 'iTunes Music folder' location in the Preferences does not instruct iTunes where to look for existing songs it currently knows about. It directs iTunes where to store any new songs it Imports, or 'Adds' and copies to its Library organization (if that attribute is selected). This is an important distinction.
You can do one of two things:
1) Move all the files back to the C: drive where the iTunes program expect them to be, and then move them to the D: drive using iTunes
OR
2) Delete all the broken song references within iTunes and Rebuild the Library
The first method will preserve your Library information: Playlists, Ratings, Last Played, Play Count. The second method will lose these attributes.
Song attributes stored directly in each music file are as follows: Artist, Album, Song Title, Year, Comments, Compilation tag, Lyrics, Genre , Grouping, Composer, BPM, Album Artwork, Bit Rate & Kind (Both not tags - inherent to the file itself). You will not lose any of these attributes regardless of the method used to recover your Library.
Either method should be relatively easy to accomplish as long as you can maintain some control over the file moving (it's not rocket science). If your C: drive cannot accept the temporary move of your files, you may be stuck with option 2. If you do not have many important playlists, or care about ratings, playcounts, etc., then option 2 is a bit easier.
Post back with more questions...or with your 'choice'. We'll go from there.

How to remove the statusbar message in panelCollecion ?

Hi All,
JDev ver 11.1.1.3.0
How to remove the statusbar message in panelCollecion ?
I am getting 'Columns hidden' in the status bar.. i want to remove that ?
give suggestion..
Regards
Gops

so ...
Gops wrote:
JDev ver 11.1.1.3.0
Jan Vervecken wrote:about ...
Navaneetha Krishnan Nataraj wrote:
For the PanelCollection, add statusBar to FeaturesOff attribute.fyi, the "featuresOff " attribute is documented
at http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
regards
Jan- "Oracle Fusion Middleware Tag Reference for Oracle ADF Faces 11g R1 PS3 (11.1.1) E12419-05 "
at http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/toc.htm
refers to http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
documenting the "featuresOff " attribute with valid value "statusBar "
- "Oracle Fusion Middleware Tag Reference for Oracle ADF Faces 11g Release 1 (11.1.1) E12419-04 "
at http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/toc.htm
refers to http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
documenting the "featuresOff " attribute not with valid value "statusBar "
regards
Jan

Remove reference to Publishing Feature from site template

Hi all, I have a custom site collection which I package as a wsp to deploy as a custom solution template to multiple sites.
Accidentally, years ago I've activated Publishing Features in my site template and then disabled them. I still work and create new templates from my site without any problems (ShP 2010).
Now, I've installed SharePoint 2013 and updated my site template to 2013. Then, I've created the new wsp but when I try to apply my template to a new site collection I receive an error message: "Failed to instantiate file "AlternateMediaPlayer.xaml"
from module "Style LibraryMedia Player_Features\PublishingResources": Source path "Features\PublishingResources\AlternateMediaPlayer.xaml" not found."
How could I remove all the reference to features belonging to Publishing Features?

Hi Elena_B,
According to your description, my understanding is that you want to remove reference to publishing feature from site template in SharePoint 2013.
You can do as the followings:
extract all files from WSP file by (a tool or) changing the wsp file to cab file and then extract all files to a working folder.
edit the Onet.xml file to remove the unsupported features and save the changes.
create a ddf file for makecab.exe to repack the wsp
run cmd: makecab /f my.ddf to generate the new WSP file
More information, please refer to the link:
http://lassewikmark.wordpress.com/2009/11/16/howto-remove-unused-features-from-a-site-template-file/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/37e96410-7fb9-462b-a3e7-c150f2de7107/site-template-and-disabled-feature?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS

Dear gurus,
how to remove all the cleaup events from DBA_AUDIT_MGMT_CLEAN_EVENTS
Arun

Hi,
Take a look:
http://www.morganslibrary.org/reference/pkgs/dbms_audit_mgmt.html
Regards,

How to remove alternative netbios name

We renamed a Windows 2008 R2 x64 server.
We renamed it by running
netdom computername oldname /add:newname
netdom computername oldname /makeprimary:newname
netdom computername newname /remove:oldname
REF: http://technet.microsoft.com/en-us/library/cc835082.aspx
This was done in a staged manor over a couple of days with reboot's and other configuration changes to keep services up as much as possible while changing the server's name. From the point of view of active directory everything worked. The object in users and
computers has changed name, their is no reference to oldname in the AD Database (I spent hours searching in ADSIEdit) and the DNS records are correct. We have even checked the system name table with
C:\Windows\system32>netdom computername newname /enumerate:ALLNAMES
All of the names for the computer are:
newname.ourdomain.local
The command completed successfully.
and this shows the single new name :)
However.....
The server still responds over netbios to the oldname and the newname. We tracked this back by doing a network capture and proving that it was responding to the old name. After that we ran
C:\Windows\system32>nbtstat.exe -n
OURDOMAIN: Node IpAddress: [10.x.y.z] Scope Id: []     NetBIOS Local Name Table
    Name Type Status
NEWNAME <00> UNIQUE Registered
OURDOMAIN <00> GROUP Registered
NEWNAME <20> UNIQUE Registered
OLDNAME <20> UNIQUE Registered
outputs modified for obvious reasons.
We have looked in the registry and neither of the following keys contain the oldname
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames
or
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName
This is puzzling. Does anyone know how to remove OLDNAME from the systems netbios identity?
Or even any way to progress our diagnosis?

Hello,
I think the information on the cache needs to be cleared.
Try this:
Ipconfig /flushdns
Ipconfig /registerDNS
nbtstat /RR
Hope this helps,
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Remove reference

I got next ERROR:
ORA-01436: CONNECT BY loop in user data !!!
Can do you tell me somebody how remove reference ?

See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/pseudocolumns001.htm#sthref787 if applicable
Regards
Etbin

How to remove PO ref in inforecord

Hi,
When i created a subcontracting PO without removing the info update check box i created the PO and it went and updated the info record with this new PO in the REFERENCE FIELD of info record and it is grayed out. How to remove it if this is there then the costing picks up only this PO price so i need to remove this PO. please tell me how to do it. I tried removing the info update and record in the PO but still its there.
Thanks,

Hi
U can restict price adoptation from last Po price using EVO parameter
path OLMEEnvironment Data>Define Default Values for Buyers-->Settings for Default Values select default value and go to details
In price adoptation tab select do not copy IF u wany manual price select check box there
Now add EVO parameter and default value to ur user id
Vishal...

How to remove Oracle Server 8.0.5 from AIX 5.2?

I am attempting to remove software Oracle Server Enterprise Edition 8.0.5 using program orainst. I change directory to /u01/app/oracle/product/8.0.5/orainst and execute the command and get an error message:
$ ./orainst
Cannot determine if this is AIX version 3 or 4.
Oracle cannot be installed.
Exiting orainst procedure.
This UNIX server is running AIX 5.2. I was trying to use Oracle's program to uninstall the software instead of using a UNIX command to remove the files. When I run the Oracle 10gR2 OUI it lists only the 10gR2 software as being installed. It does not show the 8.0.5 and 9.2.0 software that I want to uninstall. I am going to raise the 10gR2 OUI question in a different post.
Does anyone have a suggestion on dealing with the message from the 8.0.5 orainst program?
Am I taking the right steps to uninstall the 8.0.5 software?
Thank you,
Bill

Oracle's recommended way to remove software is via the same program used to install it. If that is not possible they do give instructions on removing directories using UNIX commands. If I use UNIX commands there remains the problem of updating file /u01/app/oracle/oraInventory/ContentsXML/inventory.xml to remove references to the software I deleted.
Remarks in ContentsXML state clearly
"". That tells me not to use vi to edit the file and delete obsolete references.
Since the file contains lines
<HOME NAME="ORACLE_HOME1" LOC="/u01/app/oracle/product/8.1.7" TYPE="O" IDX="1"/>
<HOME NAME="ORACLE_HOME" LOC="/u01/app/oracle/product/9.2.0" TYPE="O" IDX="2"/>
<HOME NAME="ORACLE_HOME_10g" LOC="/u01/app/oracle/product/10.2.0" TYPE="O" IDX="3"/>
<HOME NAME="agent10g" LOC="/u01/app/oracle/product/10.2.0/agent10g" TYPE="O" IDX="4"/>
how else am I to remove references to deleted software except by execution of Oracle's install software?
Thank you,
Bill

How to remove reference to workgroup?

Similar Messages

Maybe you are looking for