How to remove repeated mails in exchange online outlook web app

Hi,
Any help me , how to remove repeated mails in exchange online outlook web app . As we are in process of migrating mailboxes to office 365 . We have migrated 5 mailboxes . But when i checked outlook web app after migration completed , i could see repeated
mails . When i compared with on premise outlook and office 365 outlook web app , there was lot of differences in read and unread mails .
Customer is expecting , same read and unread count should be replicated to office 365 owa.
Please suggest me to prevent this problem . As this is very urgent to give solution to customer .
Big thanks in advance.
Vinoth .

If you've setup Outlook 2013 so it's connected to Office 365, and you've import the .pst file into Outlook, it will be showing as another "mailbox" within Outlook, but default called "Personal Folders" (unless you renamed it when it was created).
You should find that you can simply copy the mail items / folders from Personal Folders into their new home in the Office 365 mailbox. Once that's done Outlook will synchronise the items with o365 which may obviously take a while to complete, but once it's
finished those messages will be available online.

Similar Messages

TS3899 Micrsoft exchange vs outlook web app?

My work email is through microsoft exchange, but recently it moved to an "outlook web app" and now my iPad won't recognize the account and I can't use email on my iPad. Any suggestions?

I access my outlook web interface via safari....i have a page to go to https:\\email.XXXXXXXXXX.org
and then I can type in my login info.
Maybe your IT has something similar?
If there's no web page you may need to talk to your IT department. There may be security protocols or codes that you need to have set to have access.

Publishing Exchange 2013 Outlook Web App with Forefront TMG 2010

Hello guys,
I have published Exchange 2013 via TMG 2010 with pre-authentication. Since this is the first time I am doing it- I want to ask experts for the explanations:).
When I configure Active Sync on mobile, I just type the password and it's starts syncing after 20 sec.
When I use browser and trying to login using TMG logon screen, after I enter credentials (if they were not wrong), I get exchange 2013 logon screen ( because my password was checked by DC's).
I have customized TMG tamplate to Exchange 2013 tamplate, but it did not help- I have two logon screens.
Is it possible to configure TMG for showing only one logon screen ( without disabling pre-authentication) ? Does it work this way?
Did I miss something?

Hi,
Please try to enable FBA for external and internal OWA 2010 users by the methods in the blog below.
There are several ways to accomplish this:
Have internal users pointed to the internal interface of the Forefront TMG and utilize the forms-based authentication logon page offered by Forefront TMG.
Deploy Forefront UAG instead of Forefront TMG. Forefront UAG allows you to have FBA enabled on both the Exchange 2010 Client Access Servers and on the Forefront UAG solution itself.
Publish Exchange 2010 to the Internet using Forefront TMG but do not configure pre-authentication. This way the users need to go through the Forefront TMG solution, but will authenticate directly against the Exchange 2010 Client Access servers.
Configure an additional OWA and ECP virtual directory on the Exchange 2010 Client Access Servers.
Reference:http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part1.html
Then check the blog
- Creating a custom Forefront TMG 2010 OWA FBA logon page
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Does Firefox allow use of full Outlook Web App for e-mail. If yes how do I switch from light to full?

My e-mail is available throuhg Outlook Web App for microsoft Exchange and since I chose Firefox as my default browser I can only get the light version. Does Firefox not support the full version of Outlook Web App for windows 7

Firefox simply tells the operating system to use the default mail client, so whatever the default is, that will be used.

How to use Nokia mail for exchange

How to use Nokia mail for exchange for N82 so that it can push mails for gmail,yahoo.

It appears that what you are looking to do is from another product at Nokia called Nokia Messaging. Go to mail.nokia.com and setup a messaging account and add the gmail and yahoo accounts there. Then SMS send the configuration program to your device. Install it. it will add all the accounts to your device on install and will send messages to your device. So at this point you will have Mail for Exchange for you corporate mail and Nokia Messaging for you personal mail ( gmail and yahoo).

Stolen iPad was wiped and erased/synched my exchange calendar. I have recovered some of the calendar entries through the outlook web app, but only entries made in the last 15 or so days. Any ideas on how to recover the rest?

My ipad was stolen over the weekend and i immediately contacted apple to do a data-wipe.
On wednesday, the ipad was apparently wiped and then decided to sync with all of my other systems. It's been two days and I just figured out how to access and recover deleted items from the Outlook Web App from my exchange host.
They were scattered throughout and sorted by the date they were added to the calendar so some things are still missing. Anyone know how to restore what i'm still missing?

My ipad was stolen over the weekend and i immediately contacted apple to do a data-wipe.
On wednesday, the ipad was apparently wiped and then decided to sync with all of my other systems. It's been two days and I just figured out how to access and recover deleted items from the Outlook Web App from my exchange host.
They were scattered throughout and sorted by the date they were added to the calendar so some things are still missing. Anyone know how to restore what i'm still missing?

How to remove appstore update badge notifications without iTunes, Cydia app etc?

Hi there, very simple Q - How to remove appstore update badge notifications without iTunes, Cydia app and other melarchy?

That's right

How can i transfer mails from iphone to outlook

how can i transfer mails from iphone to outlook

I misread your post. You can't transfer items to iTunes without connection to your computer. To transfer without synching, make sure you don't have your preferences in iTunes set to automatically synch. Then when you connect your phone but before you synch, in iTunes File>Transfer purchases. Note that only iTunes purchased media can be transferred this way.

Exchange and Office Web Apps Integration - Wrong Url to Outlook Web App port 444

Hi,
I'm trying to setup Office Web Apps integration with Exchange 2013. Office Web Apps are working fine with SharePoint 2013 and the WAC servers are listed as in a healthy state.
When trying to open an office document from OWA I get the usual "Sorry...we ran into a problem. Please try again"
However I have noticed that the URL that OWA is passing WAC is in the format: https://exchangeservername.domain.com:444/owa/[email protected]/wopi/files...
This is the backend server address! All the internal and external urls for owa, ecp, ews etc are set to https://mail.domain.com and they all seem to be working fine. Client Access and Mailbox roles are on the same server.
If I change the url to https://mail.domain.com/owa/[email protected]/wopi/files... then the office file opens correctly in Office Web Apps
How do I correct the URL that OWA is sending Office Web Apps?
Thanks!

Hi DJL,
If everything works well except open document via OWA, it seems Exchange server 2013 has been configured correctly.
Please follow me to check Office Web Apps Server settings and Integration.
OWAS settings
1. Certificate:
Come from a trusted CA, include FQDN of OWAS farm in SAN field.
Exportable private key.
Friendly name must be unique within Trusted Root Certificate Authorities store.
2. Farm:
New-OfficeWebAppsFarm with following parameters
-InternalURL is the FQDN of the server that runs OWAS
-ExternalURL is the FQDN so that OWAS can be access on the Internet
-CertificateName is the friendly name of the certificate to be used for HTTPS
3. Explore this URL https://mail.domain.com/hosting/discovery
If OWAS works well, you can see a WOPI-discovery XML file in web browser.
Integration
1. Configure OWAS URL via EMS,
Set-OrganizationConfig –WACDiscoveryEndpoint https://mail.domain.com/hosting/discovery
2. WAC stands for Web Access Components.
Check App Log the 140 and 142 Event IDs for MSExchange OWA.
142 means the discovery of the OWAS was successful, 141 means something went wrong.
3. Enable OWAS.
By default, OWA Virtual Directory is already enable WAC Viewing on both public and private computer.
Please run "Get-OwaVirtualDirectory | FL *wac* "to check whether both “WacViewingOnPublicComputersEnabled” and “WacViewingOnPrivateComputersEnabled” parameter is True.
4. Method to collect logs on OWAS.
Run following command in OWAS powershell prompt:
Get-OfficeWebAppsFarm | FL *log*
More details to refer:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Mail: cannot change the outlook web access

Hello,
I need to change the outlook web access, but the system is automatically reconfiguring it any time i do. For this reason, i am not able to connect to my outlook mail. Any ideas how to solve the problem?
The automatic outlook web access is webmail.XXX.XXX and what i would need is: https://webmail.xxx.xxx/exchange
Thank you for any help

Hi there!
OWA configuration is very tricky...I know that I was never able to configure mine via my device interface to BIS. Only by using a PC/browser to my carriers BIS site was I successful. Here is the list of carrier BIS sites:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
And here is the KB with specific OWA instructions -- follow them very very carefully:
KB03133 How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't "send" mail in Outlook Web App

Firefox version 34 on Ubuntu Linux 12.04
Several users cannot "send" email using the Outlook Web App. I'm in the process of contacting Microsoft to see if the problem is on their end. The "send" button works fine in Chrome.
I've tried:
-Using the keyboard shortcut (Alt-S)
-Restarting firefox with addons disabled
-Changing the zoom level
-Tried in Private mode
-Tried using the popout window to compose and send
-Tried disabling the proxy (does not work with or without the proxy)
I've noticed that after creating a new message, no draft is saved. Cannot send with a new message or when replying.

Did you realize this is a forum for MacBook Pro's? Outlook is a Microsoft product that only runs on MS Windows. Perhaps you could provide more information such as:
I am running Windows XP, Vista, Win 7 under Boot Camp and am attempting to send mail using Outlook. I am running into the following problems........ and then tell more about how you have set up Outlook, what issues you are having and what troubleshooting steps you have taken.
At any rate if you are using Boot Camp, Fusion, Parallel's etc.. your best bet is to begin posting in those forums. This is a forum for MacBook Pro's 2008 or later. You can find the Boot Camp forum at:
http://discussions.apple.com/category.jspa?categoryID=237
Regards,
Roger

Import contacts outlook web app exchange 2010

How to import contacts into outlook web app exchange 2010 ? Or how to import vcard files into outlook web app ?

It is correct. Vcard and Vcalendar is a feature of Outlook.
You should import Vcard with Outlook.
How to use the vCard feature in Outlook
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?

Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?
We recently upgraded from Exchange 2010 to Exchange 2013.
The links that used OWA Web parts have completely stopped working and generate the " :( something went wrong contact your help desk" screen for domain Authenticated users other than myself. The links accessed content of a Shared Account of which
I am an owner and can set the necessary permissions using the Outlook 2013 client.
Using the example from the link provided below we were able to provide calendar access to all authenticated users in our area. The link for calendar still works for me but for noone else. Additionally, all navigation menus are missing when I use this link.
<server>/owa/<SMTP address>/?cmd=contents&module=calendar&view=weekly name
Another crafted link provided web access to our group's task list. This has completely stopped working for anyone including myself. However, when I use "open another mailbox" I am able to navigate to the needed pages.
<server name>/owa/<SMTP address>/?cmd=contents&module=tasks
These links were crafted using advice provided from this provided link.
technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx
Is it still possible to use Outlook Web App Web Parts in Exchange Server 2013 - OWA?
Or
Is this a misconfiguration of some sort?
My IT support has given up and closed out the ticket stating that maybe Microsoft will fix this someday...

Hello,
At present, there is no official article to verify whether we can use Outlook Web App Web Parts in Exchange Server 2013. In exchange online, the Outlook Web App Parts is supported.
Cara Chen
TechNet Community Support
Hi, you said this feature is supported in Exchange Online (I understand you're referring to Office 365). Can you please point me to some documentation as I was trying to use it with my E3 account and it doesn't seem to work?
What I'm trying to acomplish is something similar to our old URL (Exchange 2010) in Office 365:
https://ourserver.mydomain.com/owa/[email protected]/?cmd=contents&module=calendar&view=monthly
The best I can do in Office 365 is this:
https://outlook.com/owa/mydomain.com/[email protected]/#path=/calendar
But it's clearly not the same and Office 365 ignores all the information I add to the URL. I would greatly appreciate something in the line of the document referred by 'MarquetteENG' (technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx)
Thanks.
Paulo.
Paulo Dias - IT Pro Evangelist

How to disable contacts search(Auto Complete) while composing Email from Outlook Web App(OWA) in Local Exchnage server?

In on premise Exchange server (Local Exchange) i want send the email using custom address like [FAX:name@/FN=333] from
Outlook Web App(OWA), while clicking on send button i got the error like "The message can't be sent because at least one recipient isn't valid." so i am unable to submit the email from OWA.
but i am able to send the email using custom address like [FAX:name@/FN=333] from Outlook Web App(OWA) of Office 365 exchange server.
what is difference b/w Local Exchange server OWA & Office 365 OWA?
is there any configuration changes needed for Local exchange server?
so How to disable the searching contacts functionality(auto complete) & error message in OWA of Local exchange server?

Hi,
What’s your Exchange environment? Exchange 2010 co-existing with Exchange 2013? Can you share your related transport rule here for more analysis? What’s your custom email address format?
I created a custom address like Fax:Winnie@/FN=333 in my tab environment, it returned an error about “The address ‘Fax:Winnie@/FN=333’ is not a valid SMTP address”. Please update your Global Address List in Exchange server and if there is any error log,
please provide more information for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with - how can I change this?

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20 - how can I change this?

Click on the below link :
https://get.adobe.com/flashplayer/otherversions/
Step 1: select Mac OS X 10.6-`0.`0
Step 2 : Safari and FIrefox
Then click on " Download Now" button.

How to remove repeated mails in exchange online outlook web app

Similar Messages

Maybe you are looking for