How to remove 'ripple' caused by vibration

Hi,
Fairly new to editing in Adobe CS. But I am having problems with one of my clips, and I just cannot figure out a solution.
I fly a multicopter with a gopro moounted. Today I had to use a 'backup' drone of mine that occasionaliy give me video with a ;ripple' caused by vibration from the props. Usually I just cut out the video that has this ripple, but the video I have now has it all, and I cannot figure out an effect, or fix in either Premiere Pro or After effects to clean it up.
An example of this is here: https://www.youtube.com/watch?v=sqH_dZDsCIM
Youtubes compression makes it looks worse than it really is, but you get the idea of the problem.
Help please.

Okay I am deleting me first response because I didn't look at your video, I just assumed, and assumed incorrectly that you were talking about rolling shutter problems. The flicker you are seeing is caused by lens flare because you have no lens hood and the sunlight is coming down through the props. There's a great deflicker plug-in that will probably fix your shot.
Flicker Free: Deflicker Time Lapse, LED flicker, and Slow motion
In case you're wondering about what I said before, I had assumed that your problem was caused by Rolling shutter problems. The best way to solve rolling shutter problems is to shoot a high frame rate then run warp stabilizer or a rolling shutter repair plug-in. There are several to choose from.

Similar Messages

How to remove shadow? Need to know how to remove shadow cause by on Camara flash?

How to remove shadow? Need to know how to remove shadow cause by on Camara flash?

You might find some of this useful:
http://www.photographyboard.net/removing-flash-shadow-in-photoshop-5407723.html

How to remove fluoroscopy caused by Scanning a doublesided sheet?

Hello dear community,
I'm from germany, sorry for my bad english.
I scanned some pages with my scanner and the pages are flouroscopied.
There are them:
http://tai08.de/dateien/pci_aufbau.jpg
http://tai08.de/dateien/pci_spezifikationen.jpg
http://tai08.de/dateien/pcie_switching.jpg
How to remove this in Photoshop CS3? Consider that I'm very new in Photoshop but I can understand english words good:-)
Thank you for your help. Warm regards from Germany.

::By the way, do you know how to scan single sides of a book wihtou
these inner "edges" --> I mean the inner waves/shafts (its not plane).
Sadly, the only "trick" I know for this is to cut the book apart. You
probably do not want to do this. Someone else may know a way, or there may
well be specialized equipment that does not require destroying the book.
As for duplicating your illustrations in Illustrator or similar programs, I
would place the image you wish to duplicate on the bottom layer, with that
layer locked and dimmed. On a new layer above it, you can use the old art as
a guide for quickly drawing new art.

How to remove bands caused by dot structure of printed original

Using digital photography to capture the image of a large poster printed with dot structure. Portions of the image have bands caused by the pattern of dots. Resizing and rotating doesn't reduce or eliminate. What is the best way to remove these bands in Photoshop? Note: clone tool not satisfactory (causes fuzziness, blurring). Tried selecting the affected area(s) and using Gaussian Blur but bands are too wide. Same for Dust and Scratches. Maybe there isn't a good way to remove them. Anyone have experience with this?

As Curt says. It is Moiré pattern from the dots. This one goes way back to the legendary Wayne Fulton's Scan Tips.Com which was set up in 1997!
http://www.scantips.com/basics06.html
http://www.scantips.com/basics6b.html
http://www.scantips.com/basics6c.html
Go through the above links, and get back if you have problems.

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

How to remove the installed JDeveloper Update causing error

Hello there,
I install some webcenter available updates this morning...after restarting the JDeveloper11gR1 I am experiening error.
Can someone tell me how to remove the newly installed update so that I do not experience this errors again?

As the last resort you can rename the systemxx.x.x.x.x. folder and restart jdev again. When you are asked if you like to migrate, answer no as the error is likely to be migrated too.
If this does not help you can uninstall jdev, remove the whole installation folder and reinstall jdev.
Timo

How to remove database profile in report

Hello,
We have a report right now and upon accessing it, a window asking for a Database Profile comes out. This causes the program to have additional selection parameters for Project Definiton, WBS element etc.
Before we just ran the report for Period, Year, Cost Center Group. Ever since the Database Profile appeared we now have to put * in the WBS element so that the report will run.
Anyone know how to remove the Database Profile selection? One of our users reported that this wasn't in the selection parameters and our developer said there were no changes to the report.
Are there possible reasons why the Database Profile suddenly appeared?
FYI, the report was created using Report Groups (GR51/2/3)
Thanks.

Hi,
What selection criteria you need?
Database profile is needed to access objects from Logical PS DB. You have to put at least one selection object viz. Project Definition or WBS, or Network or Activity.
Create one of your own profile as per requirements and default it in user param.
Regards,
Harsh.
Edited by: Harsh Saxena on Jul 8, 2011 1:13 PM

How to remove xmlns in node level

Hi Experts!
How to remove xmlns in node level in response xml file. I tried to use AF_Modules/XMLAnonymizerBean, but it did not work.
Can you please help me out on this.
I want to remvoe xmlns tag in LEVICOM
Eg:
- <Addenda>
   - <LEVICOM xmlns="">
Thanks,
Hari

Hi Expers!
Please help me out on this. The below xslt mapping working only to remove xmlns prefix in xml file, if parent having only one child. This code is not working if parent having multiple childs.
Eg: <parent>
           <phild xmlns="">
             test1
            </phild>
        </parent>
The above example working fine with below xslt mapping to remove xmlns tag.
Second scenarion not working
Eg: <parent>
          <child1 xmlns="">
             test1
          </child1>
          <child2 xmlns="">
              test2
           </child2>
        </parent>
The above example is not working.
Here is the code:
You can remove the namespace prefixes using an XSLT mapping if they are causing problems with applications outside of XI.
Try the following code:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns="http://www.arconw.com/XI/XSLT_Library/XmlNamespacePrefixRemoval"
version="1.0">
<xsl:output method = "xml" />
<xsl:template match="/">
<xsl:apply-templates select="*" mode="remprefix"/>
</xsl:template>
<xsl:template match="*" mode="remprefix">
<xsl:variable name="newname" select="local-name(.)"/>
<xsl:element name="{$newname}" namespace ="{namespace-uri()}">
<xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
<xsl:apply-templates select="*" mode="remprefix"/>
</xsl:element>
</xsl:template>
<xsl:template mode="copyall" match="@*|comment()|processing-instruction()|text()">
<xsl:copy>
<xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Thanks,
Hari

How to remove discoloration in WP-DC34 underwater casing?

how to remove discoloration in WP-DC34 underwater casing?

the inside of the underwater casing discolored. It used to be a clear see-thru case but now, it has this white colored substance on the inside that makes it hard to see the display of the camera. I don't know what caused it. I wasn't able to use it for a long time and when i did used it on a swimming trip, after i've rinsed it and left it over night, the next day the discoloration appeared. I thought that it might have been caused by salt deposit so i soaked the inside of the casing with water and left it over night. The next day, it got worst. So took it out, tried washing it with soap and dishwashing soap, didn't work. I tried rubbing it with clothe, it cleared a little bit, but still there. I'll take a picture of it and post it here so that you'll have a visual of what i'm talking about, the white substance in the casing.

How to remove the OR clause in this query?

Hello Everyone,
I have this query where i have a lot of joins and in the where clause there is a ISNULL and conditions based on OR clause.
How to remove the use of the OR clause which may cause performance problems? Can anyone suggest a method to remove the OR clause?
select RS.PLANNEDSTART,
OD.ESTSHIPDATE
FROM TABLE1 RS(NOLOCK)
   INNER JOIN TABLE2 SS(NOLOCK)
   ON RS.ID1             = SS.ID1
   INNER JOIN TABLE3 AM(NOLOCK)
   ON AM.KEYID       = SS.KEYID
   INNER JOIN TABLE4 OD(NOLOCK)
   ON SS.KEYID= OD.KEYID
    INNER JOIN TABLE 8 DR
   ON
WHERE           (isnull(RS.DATE1,'1970-01-01 00:00:00.000') ='1970-01-01 00:00:00.000'
                 AND OD.DATE1 between @Beginning_Route_Date and @Ending_Route_Date)
             OR
             RS.DATE1!='1970-01-01 00:00:00.000'
               AND RS.DATE1 BETWEEN @Beginning_Route_Date and @Ending_Route_Date)
Regards
Gautam S
Gautam S

this is one way avoiding OR clause
WHERE CASE WHEN isnull(RS.DATE1,'1970-01-01 00:00:00.000') ='1970-01-01 00:00:00.000'
THEN OD.DATE1 ELSE RS.DATE1 END between @Beginning_Route_Date and @Ending_Route_Date)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to 'Remove' user access from deleted dual boot system's users in existing operating system's folders and files?

I have Windows 7 Enterprise Professional, accessed earlier from (now deleted) other dual boot operating system (User folder), which shows it's users as unknowns for folder properties in Windows 7 Enterprise Professional's "C:\Users\Aniruddha",
which causes system not responding, how to 'Remove' these unknown users from folder properties of "C:\Users\Aniruddha"?
Also "C:\Users\Aniruddha\Application Data" creates many of own folders within eachselfs end folder ("C:\Users\Aniruddha\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data", "C:\Users\Aniruddha\Application
Data\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data\Application Data" and many) because of which system stops responding randomly, starts responding only for "ctrl+alt+del", why such self
creation begins?
Whether a standby user with same file structure copied from a user would dynamically link it's shortcut folders with Windows user from whom these folders were copied or whether there would be no link and for above said problem I would restore User's file structre
back to normal just by copying from standby user?

It seems your PC is infected with some malware. Use a trusted antivirus software with the latest definition updates installed to scan and remove the malware.
Balaji Kundalam

How to remove the prolog from XML in Oracle?

Our system works like this:
1. Pass in a piece of XML to the database as a CLOB
2. Database converts this to XMLTYPE (stored as a CLOB (you can skip over this, Marco *{;-) ))
3. An application then reads the XML from the database and inserts it into another bit of XML
4. The application continues its processing based on this new composite XML.
Up until now, the XML loaded into the database in step 1 (by various systems) has never contained a prolog. However, a new system has come along and is now passing in a prolog. This causes problems for the application in step 3.
Aside from trying to get the new system to not pass in the prolog, is there a way to remove it from within Oracle?
The two solutions I've come up with don't feel elegant:
1. Use XMLTABLE to extract the main root node (which could be different, depending on which system sent in the data, and could change)
2. Convert the prolog into a comment, using REPLACE, before converting the CLOB into an XMLTYPE.
If I was forced to use one of these methods, I'd go with 2, but I really, really hope there's a better way of doing it.
Has anyone got any other suggestions, please?
PS. We're currently on 10.2.0.4 and are shortly about to move to 11.2.0.3, but the solution has to work on both versions, for added fun and excitement!

This is the error the application gives: "Error obtaining Additional Info SAX Exception : No processing instruction starts with 'xml'" which the app dev says is due to the presence of the prolog in the middle of the xml the app has build up.So basically, the app just "pastes" the XML in the middle of another without caring about the structure? What kind of design is that?
IMO, the app has to be fixed, not the input XML.
Plenty about how to add the prolog, nothing about how to remove it!You can use XMLQuery function to extract the root element :
SQL> create table tmp_xml3 of xmltype
2 xmltype store as basicfile clob;
Table created
SQL> insert into tmp_xml3 values (xmltype('<?xml version="1.0" encoding="UTF-8"?><root/>'));
1 row inserted
SQL> select * from tmp_xml3;
SYS_NC_ROWINFO$
<?xml version="1.0" encoding="UTF-8"?><root/>
SQL>
SQL> select xmlquery('*' passing object_value returning content)
2 from tmp_xml3;
XMLQUERY('*'PASSINGOBJECT_VALU
<root/>
Edited by: odie_63 on 22 août 2012 15:26

How to remove kindlegen plug-in in InddCS5.5

Once again, I fell for the recommendation to install a third-party plug-in: Amazon kindlegen plug-in for indesign CS5.5. It has caused my INDDCS5.5 to not be able to load. I want to remove this kindlegen plug-in. I saw on one forum (not adobe forum) some very tecchie/geekie instructions, involving yet another program to be installed to remove kindlegen. Does anyone here know some easier way to get rid of the thing?
This is the link I found with all the uber-geeky stuff to fix it. Waaay over my head: http://www.mobileread.com/forums/showthread.php?t=96903

Kindlegen always caused problems for me. IMHO, a horrible program. I just stick to InDesign "export for epub" option. And then Amazon, B&N, et. al., can do the rest (like, Amazon converting to their mobi format when you upload an epub file to kdp.amazon.com.
~Karen
Zagmathustra <[email protected]> wrote:
Zagmathustra http://forums.adobe.com/people/Zagmathustra created the discussion
"Re: how to remove kindlegen plug-in in InddCS5.5"
To view the discussion, visit: http://forums.adobe.com/message/6227544#6227544

Does anyone know how to remove images from google

i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search even doe this does not kind of relate thank you .

Does anyone know how to remove vocals from an import from I tunes...a polyphonic stereo mix ?
If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
1. Import a Stereo mix into a Logic Stereo track.
2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
3. Hard Pan L/R both stereo tracks.
4. Insert an EQ and Gainer plugins into the duplicated track (R).
5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
6. Open the Gainer plugin and thick the "Phase Invert" Right button.
7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
P.S Click the image below to show its real resolution!
Regards,
A.G
======================================
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
======================================

Does anyone know how to remove pop up, malware and virus form OS X 10.9.5, there is a lot of pop up on my mac book air.

Does any one know how to remove pop up and malware. There is a lot of pop up on my mac book air OSX 10.10

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

How to remove 'ripple' caused by vibration

Similar Messages

Maybe you are looking for