How to remove saved messages

I have 6gb of messages(saved) on my phone, and I have deleted every text on my phone.

I have figured it out how to delete the (saved) messages, you simply go on the conversations. Press and hold the text and it should come up with Copy, More. Press More and you should see on the top left that says Delete all. I did it and it went from 2GB down to 100MB.
I hope this helps.

Similar Messages

  • How to remove large message stuck in the adapter engine?

    Hi experts,
    We have a large message abt 100 MB stuck in the adapter engine which is causing the J2EE server to restart continuously.
    I have tried increasing the heap sizes and the number of threads in config tool, but no luck. My question here is how to remove that message? Also I checked smq1 and smq2 both are empty.
    Regards.

    Hi Nagasatya,
    This issue is realted to Large amount of data.You have to write condition in the query.I have face same issue,but resolved it.Please do the following steps.
    Go to Configtool and selct the com.sap.aii.adapter.jdbc.svc and set this jdbc service to start manually instead of auto.
    Then restart server0, this time it should be started successfully. Then go to rwb and try to
    find if any jdbc hanging/failed messages are there, if so, cancel them;also deactivate the problematic jdbc communication channel, otherwise itwill poll the data again. After all above, you can manually try to start this jdbc.svc particually.
    Thanks
    Ravi

  • How to remove a message?

    I have posted a completly false message. So as to avoid anyone to be misleaded by this erroneous answer I was looking how to remove my answer. After 5 minutes of searching I'm feeling completly lost.  I can't find this function.  
    Where is this basic function?

    I've been here a number of years and known all that time that I could not delete a post. I did not quit posting here. Many others have done the same so I think your "most" is greatly exaggerated.
    Deleting requires administrative privileges for the software used here and the moderators are not going to grant that right to everyone. It also could lead to a lot of gaming the system.
    If you think you have posted something in error you have 15 minutes to go back and delete it. After that you can either report it here or report another post in the same thread.

  • HT5361 How to move saved messages in outlook to mail

    Could someone tell me how I can move all my saved messages from my Outlook into my mail as I wish to only use mail in future.
    Many thanks

    I Wonder if your sitting there laughing at us as if there is some big conspiracy about selecti all and deleting all from our iPhones and iPads.
    The conspiracy.
    Why can we not just not select all in the mail inbox and then delete all, if we do not want to delete every single one of them then deselect the few that we do not want to delete instead of having to select the thousands we do want delete individually. 
    And if you do make a mistake and delete the wrong emails by selecting all, then go to your trash and reinstate the ones you did not want to delete 
    I think 99% of us know how to DELETE emails individually, as you put it.
    That's just sarcasm and if not then then your not fully understanding the question asked.
    I would also say that probably 99% of us want to be able to select all and delete all if that's what we desire.
    I would just like a honest answer of why we cannot select all delete all rather than giving me a load of rubbish about encase we delete something we didn't want to delete.

  • How to remove duplicate messages from Mail in Mavericks (POP)

    Hello
    I'm having some significant problems with Apple Mail, and despite having researched widely, I haven't been able to find a solution yet. Here is my tale of woe...
    My set up is that I use Mail with 5 separate accounts, downloading all messages using POP. I keep all my mail so that I have a permanent record of all conversations, going back more than 10 years - this is about 250,000 emails. I'm running the latest version of Mavericks on a 2010 MBP. I have no intention of moving to IMAP - I need to keep a local archive of all my mail.
    A few months ago I was having problems with Mail being very slow to load and search emails. I decided to rebuild the mailboxes, but afterwards discovered that thousands of messages in the inbox of one of my accounts (and some of the sub-folders) had disappeared. Once I realised I tried to go back to a recent Time Machine back up, but, for whatever reason, that part of the back up hadn't worked properly and I was unable to recover the previous status. Ileft it while I decided what to do, and had time to deal with it.
    The last 2 years worth of emails on that account were still archived on gmail, so last week I decided to try redownloading the whole lot (something like 72,000 messages), and then uplanned to use one of the scripts I was aware of to remove the duplicates to the trash, and then remove any duplicates in the trash forever. That ought to mean I at least had an archive of the last two years of missing messages, even if I had no record of which ones had been flagged or replied to, etc.
    The downloading took about 24 hours to complete, and I now have almost 70,000 messages in the inbox of that account. However, I hadn't figured on two things:
    1. Mail 'hides' duplicate messages, meaning that all of the messages I've downloaded are showing as unread, and I can't differentiate the ones I already had in my Inbox, and the new downloads. When I click on those apparently unread messages I can see if they have been replied to or forwarded, etc, but there's no obvious way for me to remove the ones I have already dealt with to the trash, without going through them all manually, which is clearly impossible.
    2. The scripts I'd found for removing duplicates don't work. Andreas Amann's Remove Duplicates script doesn't work under Mavericks, and he has abandoned the project. I've also tried the remove-duplicate-messages.scpt made by Jolly Roger (http://jollyroger.kicks-***.org/software/), and while it *sometimes* works on individual subfolders on my Mac (but as far as I can tell removes the duplicate in that folder, rather than the newly downloaded version), mostly it doesn't work at all - it creates a 'Remove Duplicate Messages' folder on my desktop, a log inside it and a folder for removed messages, but nothing appears in the duplicates folder.
    So, I'm left in a position where I have 70,000 apparently unread messages in my Inbox, a massively bloated Mail library (which has pretty much doubled in size), a slow and unresponsive Mail program. I figure I have a number of options. Either I could abandon the last week's efforts and revert to the version of

    Apologies, this was posted here in error. Please find updated post here: https://discussions.apple.com/message/27261965#27261965

  • How to remove a message from a thread...

    I would much rather have it, that mail.app could figure out how to thread my messages correctly, but for some reason, when the subject is the same, it always thinks it is the same thread (I have a zillion mails with the subject "meeting"!)
    Is there any way to simply, (manually?) select some message, and tell mail.app that those messages should not be an that thread??

    You can always go to View and uncheck Organize By Thread, but that will apply to all messages. I don't know of any way to do it on a per-message basis.
    The only solution I can think of is to ask your colleagues to quit using stupid subjects like "meeting" and to put something more descriptive in there (like "meeting with John Smith" or "meeting on 11/20")!

  • How to Trasnfer Saved Messages

    I cannot locate where the saved messages are located on my hard drive (C), so that I can move them to another (new) computer.

    https://support.mozilla.org/en-US/kb/moving-thunderbird-data-to-a-new-computer

  • Want to clean up Contacts Actions, how? Remove Send Message options

    In Contacts > Actions the phone places "Send Message" (text) for every number in the Contact. Since you can't text a land line or fax number I would like to remove that "Action" from the phone. How can I do that? I have searched. This would make it easier/quicker for me to select texting I can actually do.
    TIA

    Under contacts and actions there is no known way to change the actions. However under your favorites you can change the default action. Favorites, tap 3 lines, tap contact,menu,more, set widget action.
    Thank you

  • How can remove this message

    Hi All,
    can anybody tell me how can i remove this massage.
    Amount is zero - line item will be ignored.
    Thanks In advance
    Murali

    Hi,
    The message can be deactivated from the below customzing settings
    - SPRO - Financial Accounting -Financial Accounting Global Settings-Document-Default Values for Document Processing--Change Message Control for Document Processing
    Application area - F5 Click new netries
    Messgage No 097
    And in the online and batch columns select ' -' switch off message  and save the same
    after this change, the system will not throw that error message.
    hope this clarifies
    regards,
    radhika
    Edited by: kolipara radhika on Sep 18, 2008 8:27 AM

  • How to remove error message power pc applications no longer supported

    How do you install photoshop 7.0 disk drive on a mac os x with the error message, "Power PC applications are no longer supported"?

    Which version of mac os x are you trying to install photoshop 7 on?
    If you really do mean photoshop 7 (cira 2002), then it won't work on any newer intel macs.
    Photoshop 7 needs an PowerPC processor and your mac probably uses an intel processor.

  • How to remove a message area

    Hello,
    I am using the following code to display error message. That works perfectly fine.
    The only problem I have is once there is no error message the message area remains
    at the top of the window and the the focus is always automatically set to the message area.
    Is there a way to remove/reset the message handler?
    I tried    lr_message_manager->clear_messages( INCLUDING_PERMANENT_MSG  = abap_true )
    but this didn't help.
    Thanks and regards,
      Christoph
    get message manager
      lr_current_controller ?= wd_this->wd_get_api( ).
      lr_message_manager = lr_current_controller->get_message_manager( ).
    if lt_messages is initial.
       lr_message_manager->clear_messages( INCLUDING_PERMANENT_MSG  = abap_true ).
    else.
      LOOP AT lt_messages INTO lr_message.
      report message
        CALL METHOD lr_message_manager->report_t100_message
          EXPORTING
            view  = 'FOUNDATION'
            msgid = lr_message->mv_msgid
            msgno = lr_message->mv_msgno
            msgty = lr_message->mv_msgty
            p1    = lr_message->mv_msgv1
            p2    = lr_message->mv_msgv2
            p3    = lr_message->mv_msgv3
            p4    = lr_message->mv_msgv4.
      ENDLOOP.
    endif.

    Hi Lekha,
    I tried your approach and its not working.
    I also tried to do this dynamically in WDDOMODIFYVIEW:
        data:   lr_message_area       TYPE REF TO CL_WD_MESSAGE_AREA.
        lr_message_area ?= view->get_element( id = 'MESSAGES' ).
        lr_message_area->set_visible( '01' ).   " 01 is invisible 02 is visible
    but nothing works
    The message area remains showing 'No Messages' and the only way to get rid of it is to click on the show list button and reset the log.
    When I do create a test application the message areas works fine but in the whole application it remains. I have no idea what's causing this.
    What I do in the application is basically the following.
    The business object has its own message handler and in the WDDOMODIFYVIEW of the view containing the message area I read this message handler and if there are messages I do the following:
    get message manager
      lr_current_controller ?= wd_this->wd_get_api( ).
      lr_message_manager = lr_current_controller->get_message_manager( ).
    lt_messages gets filled from the business object
      LOOP AT lt_messages INTO lr_message.  
      report message
          CALL METHOD lr_message_manager->report_t100_message
            EXPORTING
              msgid = lr_message->mv_msgid
              msgno = lr_message->mv_msgno
              msgty = lr_message->mv_msgty
              p1    = lr_message->mv_msgv1
              p2    = lr_message->mv_msgv2
              p3    = lr_message->mv_msgv3
              p4    = lr_message->mv_msgv4.
        ENDLOOP.
    If there are no messages in lt_messages I just want to get rid of the message area.

  • How to remove XML messages from Integration Engine

    Hi,
    i had created file - XI -file scenario activated it and check messages using tcode SXMB_MONI .Error messages coming after every minute as i set polling intervals to 60 seconds .Now i had deleted related objects from IR and ID but still XML messages coming in ....please anyone can help to stop this scenario anyhow.

    Dear Jai ,
    i had checked everything before this and even i have checked now and i had created that scenaio by my own userid and passwd. Checked sender interface, reciever interface in SXMB_MONI it's the same which i had given name to them . Even we people are surprised that after deleting all the things in IR and ID . i don't know exactly why it is coming but what i am guessing is that after activating the scenarios it might get executed from XI runtime cache and there is no dependency on IR and ID objects . so what i had done that i completely refreshed the XI Runtime Cache by using tcode SXI_CACHE but it's still not working that way also.
    Message was edited by:
            ashwin dhakne
    Message was edited by:
            ashwin dhakne

  • How to remove a message from a Topic before it's consumed?

    Hi All,
              I'm using Weblogic JMS Extensions to publish messages to a topic so
              that consumers do not receive them for at least 1 hour after
              publishing. My problem is that I need to be able to delete selected
              messages from the topic sometimes before the consumers see it. I've
              looked everywhere but can't see a simple way of achieving this. Have I
              missed the obvious? (I hope I have!).
              Many thanks in advance.
              

    Essentially, the messages do not exist until that hour. There is
              currently no way to consume them.
              _sjz.
              "jim" <[email protected]> wrote in message
              news:[email protected]..
              > Hi All,
              >
              > I'm using Weblogic JMS Extensions to publish messages to a topic so
              > that consumers do not receive them for at least 1 hour after
              > publishing. My problem is that I need to be able to delete selected
              > messages from the topic sometimes before the consumers see it. I've
              > looked everywhere but can't see a simple way of achieving this. Have I
              > missed the obvious? (I hope I have!).
              >
              > Many thanks in advance.
              

  • How to remove saved passward for any website?

    i want to remove passward save foe website, with remmenber my passward option.

    thank you very very much. its help me to solve the problem....thanks a lot.....

  • How to remove saved id and passward for any website?

    i have save id and pasward for one website now i want to remove this seved id & pasward

    thank you very very much. its help me to solve the problem....thanks a lot.....

Maybe you are looking for