How to remove/skin white screen when loading StageWebView

Hello all,
I'm facing a very tricky issue with StageWebView into a mobile View.
I'm using this example -> http://soenkerohde.com/2010/11/air-mobile-stagewebview-uicomponent/
BUT, my application has a black background and when i'm loading an HTML (wich also has a black background) the StageWebView components it's white when loading, and that i dont like.
On viewActivate handler for StageWebView component i've put the stageWebView.stage = null; and created an event handler.
The event handler has the command stageWebView.stage = myStage;
In this way i can show a loader (busy indicator) and when the page is fully loaded in background,it will pop on view.
When the StageWebView pops in view i get a flashy white screen. I have tested it on Samsung Galaxy S2 (Android).
How i can get rid of it?
Any sugestions will help a lot.
Regards,
Daniel

If you are using the Music App (playing music) - and you lock the iPad - As soon as you slide to unlock the iPad - the album cover will disappear. Is this what you are asking?

Similar Messages

9860goes white screen when loading

i have a blackberry 9860 and i change the sim and it asked for blackberry id log in and password all the 10 attempts i failed and then the wipe came and i did it once that wipe got over now when i am switching onblackberry logo comes on and when the loading bar reaches almost 60 percent the screen becomes completely white can you please help me fix it

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. (Sorry, in your situation, this is moot.)
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Now, attempt the use of these tricks -- but, if any suggest an Update Website, substitute please LOADER.EXE (located near one of the same locations as VENDOR.XML from above):
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

QTVR - White screen when loaded, but hotspots active

Hi, I'm hoping someone can help me with the following problem. I am showing quicktime VR movie in a HTML page, using the following code:;
This is in the head section:-
<script language="JavaScript" src="Scripts/AC_QuickTime.js"></script>
(Appropriate javascript file, downloaded from Apple, is in the Scripts folder.)
This is in the body section:-
<script type="text/javascript">
QTWriteOBJECTXHTML('Media/VR/SCO011VR.MOV', '600', '300', '',
'autoplay', 'true',
'align', 'middle',
'Hotspot13', '../../CTS253_PMS_00_Sco011.2_Cde001V01.htm',
'Hotspot172', '../../CTS253_PMS_00_Sco011.4_Cde001V01.htm');
</script>
When run it only shows a white inset window where the VR should be - it appears to have loaded the file as the hotspots are active (cursor changes when moved over them), but I need to click on the white area to show the actual image/panorama.
Same problem occurs whether using above code or doing a simple 'embed', but the above method avoids the I.E. activeX prompt. (am using I.E.6 & QT 6.5, and developing the HTML page on a PC).
Inserting a normal quicktime movie works fine, suggesting a problem with the VR files. I am using an old MAC with Apples quicktime VR authoring software to produce the VR, & this is the first one I have done, but I have tested an old VR file produced by another employee a couple of years ago for a different purpose, and get the same problem.
Any help would be much appreciated, as this is for a work-related project which needs fixing asap!
Windows 2000
Windows 2000

(I'm trying to restore from backup)

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

You would get better response from the iTunes community forum.
Have a nice day!

What is missing when I get a blank white screen when I try to Access some web sites?

On some web sites, I get a blank white screen when I try to access them.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

White screen when turn ipod touch on...help

There is a white screen when I turn my iPod touch on. please help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a bright white screen when turning on my ipod nano 7th gen. Have tried resetting etc etc. Any further ideas?

I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

Hello pipworms,
I would be concerned too if my iPod nano's was just showing a white screen. I recommend following the steps below:
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

I can't get past white screen when starting up, any ideas?

I Can't get past white screen when starting up, any ideas

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

Sometimes my ipod gen 5 display white screen when i choose to see a photo , was it broken ?

Sometimes my ipod gen 5 display white screen when i choose to see a photo , was it broken ?

Likely a corrupted photo file:
Try:
- Importing the proplem photos to your computer and viewing them
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Backup and then restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Why does my Mac stay on the white screen when I turn it on?

Why does my Mac stay on white screen when I turn it on?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 4
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 5
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 6
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 7
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 8
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 9
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 10
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to remove the white space that is now above the main images on each page?

http://www.nydogworks.net
Hello,
I took over updating some things on my site from my web designer. The main images on each page used to be flush with the navigation bar on each page. Now there is a white space in between each one. Can you tell me how to remove the white space?
<div id="container">
<div id="imgholder"><img src="images/feature-aboutus.jpg" width="951" height="341" alt="" />
</div>
<div id="pageContentNoside">
   <div id="sideSub">
     <form action="form.php" method="post" name="form2" id="form2"> <table width="250" border="0" cellpadding="2" cellspacing="2">
       <tr>
         <td width="273"><h2>Quick Contact</h2></td>
         </tr>
       <tr>
         <td class="mainContent">Your Name</td>
         </tr>
       <tr>
         <td><span class="style9">
           <input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Your Email Address* (required)</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Phone Number</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="phone" type="text" class="colorfieldssmall" id="phone" />
           </span></td>
         </tr>
       <tr>
         <td><span class="mainContent">Type of Dog Training</span></td>
         </tr>
       <tr>
         <td class="mainContent"><span class="style9">
           <select name="need" class="colorfieldssmall" id="need">
             <option value="select one">select one</option>
             <option value="Basic Obedience">Basic Obedience</option>
             <option value="Behavior Therapy">Behavior Therapy</option>
             <option value="Board and Train">Board and Train</option>
             <option value="Off Leash Training">Off Leash Training</option>
             <option value="Puppy Training">Puppy Training</option>
             </select>
           </span></td>
         </tr>
       <tr>
         <td> </td>
         </tr>
       <tr>
         <td><div align="left">
           <input type="submit" name="submit" id="submit" value="Submit" />
           </div>
           </td>
         </tr>
       </table></form>
     <h2><br />
       Dog Training Services<br />
       </h2>
     <ul id="subnav">
       <li><a href="basic-obedience.html">Basic Obedience</a></li>
       <li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
       <li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
       <li><a href="off-leash-training.html">Off Leash Training</a></li>
       <li><a href="puppy-training-program.html">Puppy Training</a></li>
       </ul>
     <br />
     <br />
     <br />
     </div>
<div id="suggestPost"><a href="https://www.facebook.com/pages/NYDogWorks/219268038151244?fref=ts" ></a></div>
   <div id="mainContent">
     <h1 class="copyrightType">About NY DogWorks</h1><br />
     <h2> <span class="testimonal">The Owner of NYDogWorks</span>      </h2>
     <p><span class="copyrightType"><img src="images/dogpic.jpg" alt="Dog Behavior Therapy" width="183" height="275" class="h_img_float_right" /></span><strong>NYDogWorks L.L.C. is owned and operated by Master Certified Dog Trainer and Behavior Specialist Brian DeMartino. </strong><br />
       <br />
       His training is hands down the best out there. He has become one of the most sought after dog trainers throughout Long Island, Manhattan, & New York.<br />
       <br />
       With over 15 years experience training and rehabilitating some of the toughest cases of dog behaviors. He’s Mastered the Art of teaching top knotch obedience and manners with outstanding results and has developed the most full proof and guaranteed system to fully housebreak any puppy or dog in the shortest amount of time.<br />
       <br />
       He is Certified in dog training and dog behavior and is an Official Evaluator for the American Kennel Club’s (C.G.C) Program.<br />
       <br />
       <br />
       <strong>All About NYDogWorks</strong><br />
       </p>
<p><br />
</p>
     <p>NYDogWorks Dog Education, is a Professional Dog Training Company offering dog training for puppies and older dogs through customized in-home training programs by Master Certified Trainers in Nassau County, Suffolk County, Hamptons, Long Island, Manhattan, Brooklyn, Bronx, Queens, Rockland County, Westchester County, Orange County, and Bergen County New Jersey. NYDogWorks offers obedience training, Housebreaking, Manners, socialization for your dog, Puppy Training and Education, Behavior Therapy, Trick Training, Agility, Complete Off Leash Training, Sport Work, and Personal Protection Training. <br />
       <br />
       <strong><br />
         NYDogWorks Boarding & Training Programs</strong><br />
       </p>
<p><br />
    We offer boarding and training programs done in the home of owner, Brian DeMartino. This is a customized 2-6 week program to suit your dog's needs, great for someone who feels they do not have the time or patience to train or rehabilitate their dog at their home. This is a 100% guaranteed program. Your dog will stay with us for no additional charge if we feel that he or she has not learned all that was agreed upon. We guarantee that if there is any regression within 3 months of your dog being back home with you, he/she will come back to us for no additional charge.<br />
    <br />
    <a href="board-and-train-dog-program.html">View Boarding & Training Programs</a></p>
     <p><br />
       </p>
     <p><br />
       <br />
</div>
   <div id="breadCrumbs">
     <p><a href="index.html">Home</a> > NY DogWorks - About Certified Dog Trainer Brian DeMartino<br />
       <strong>Serving all of Long Island, Nassau & Suffolk County, Manhattan, Brooklyn & Queens</strong></p>
     </div>
</div>
    <div id="footer">
      <div id="footermenu">
      <div id="footermenu1">
      </div>
    </div>
   <div class="phoneNumber" id="copyright"> Copyright © 2014 NY DogWorks</div>
     <div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a>     </div>
</div>
</div>

You should be able to add the following snippets of css to your stylesheet to fix that.
In the mainstyle.css file, change...
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
to
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
overflow:hidden;

Hello all, I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,

Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours.

How to remove/skin white screen when loading StageWebView

Similar Messages

Maybe you are looking for