How to remove suceeding zeros

Dear Experts,
I am printing a variable from vbkd-bstkd in a form.Its size is 35 characters in length.while debugging am getting tha value for that variable is 999.When dat variable is printing on the form dat value is coming as
999 00000000.I need to display only 999 in d form.How can i come across dis problem
Advance thanks to all.
Regards,
Chitty.

Hi,
There are these two function modules,
CONVERSION_EXIT_ALPHA_INPUT---- It is used to add the 0(Zero) at the begining of the value. You dont require to add zero manually for any variable.
CONVERSION_EXIT_ALPHA_OUTPUT--- It is used to Remove 0(Zero) from the Begining of the value. You dont require to remove Zero manually for any variable. Just call this Function Module and it will automatically removes zero from the begining
Hope it helps you
Regrds
Mansi

Similar Messages

How to remove leading zero from Material Number

Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.

Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

How to remove leading zeros from variable

hi,
   how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepak

You can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
   t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
      EXPORTING
        INPUT         = vbap-matnr
      IMPORTING
        OUTPUT        = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work.....

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

How to remove trailing zeros from a fraction part.

How to remove trailing zeros from fraction part, need standard API rather then some java code.

user8726363 wrote:
How to remove trailing zeros from fraction part, need standard API rather then some java code.I'm pretty sure we have all gathered that English is not your first language, but your question is not a good question in any language.
Back up. Take a deep breath.
Now - what's your problem ?
Please illustrate with results, and the code (just the class/method; not your entire application) that is causing them.
Winston

How to remove leading zeroes of a coloumn in a table

can someone tell me how to remove the leading zeroes in a table's coloumn .... its a NUMC data type..
i tried with abap statement shift leading zeroes, but its not working for me.... the sorting is missing..
in properties is there any option to remove the leading zerores>
niraja

Hi Niraja,
I am displaying a table with information from SFLIGHT. The CONNID field is of type NUMC and so it too used to contain the leading zeroes. I so deleted the leading zeroes in my WDDOINIT method before binding the internal table to the context node. The table now does not display the leading zeroes as earlier. Find my coding as shown below:
METHOD wddoinit .
DATA: lr_node TYPE REF TO if_wd_context_node,
        wa_sflight TYPE ig_componentcontroller=>element_node,
        lt_sflight TYPE ig_componentcontroller=>elements_node.
SELECT * FROM sflight INTO TABLE lt_sflight.
LOOP AT lt_sflight INTO wa_sflight.
    SHIFT wa_sflight-connid LEFT DELETING LEADING '0'.
    MODIFY lt_sflight FROM wa_sflight TRANSPORTING connid.
ENDLOOP.
lr_node = wd_context->get_child_node( name = ig_componentcontroller=>wdctx_node ).
lr_node->bind_table( new_items = lt_sflight ).
ENDMETHOD.
Regards,
Uday

How to remove leading zero in a inputfield

I have a inputfield UI element which is bind to a NUM type context. When it display a number, it always come with leading zero, like '001'. Can anyone teach me how to remove the leading zero.

http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3a/2232666aeb45f4b759848a4caf9c8b/frameset.htm
Use the Display leading zeros formatting option in the context attribute properties.
The other option is to use a data dictionary domain for the field that has a built in field conversion exit. The ALPHA conversion exit is commonly used on NUMC fields like Sales Order number to suppress leading zeros. The WD runtime will automatically use the underlying DDIC Domain Field Conversion Exit. You don't need to do anything except use that DDic to define the context.

How to remove leading zeros

I have a field 'Bill No.' of Character(10) type in my dialog program. Once I input and save value e.g. '1' in this it gets saved as 1 but in the internal table it gets stored as '0000000001'. Pls let me know how to remove these leading zeros: perhaps I'll have to use LTRIM but I am not sure.
deepak.

Hi
Use the fm CONVERSION_EXIT_ALPHA_OUTPUT.
DATA: P(10) VALUE '0000000001'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
     EXPORTING
          INPUT = P
     IMPORTING
          OUTPUT = P.
WRITE P.
Max

How to remove leading zeroes of string

Hello All,
I have a scenario where Partnumber string type shows 00000000012345 format, I want to remove leading zeroe and displ only 12345 .
How to do it,
Suggest

Hi Pradeep,
Please go through this wiki. [https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring]
It explains how to remove zeros from strings.
extract from the wiki. This is an efficient way.
public java.lang.String removeLeadingZeros( java.lang.String str ){
     if (str == null){
           return null;
      char[] chars = str.toCharArray();
      int index = 0;
      for (; index < str.length();index++){
           if (chars[index] != '0'){
                break;
     return (index == 0) ? str :str.substring(index);
If you want to show this string in a table instead of the ones with zeros you can create a calculated attribute of type string on the same node and in the getter method read the string with zeros using getAttributeValue() api and pass the string to the above method and return that string value.
You can also have another approach if you will only have numbers in your string. Have a calculated attribute of type int. In the getter method read the String using getAttributeValue() api and then convert it to an int using Integer.parseInt(String) and return the int value.
Regards,
Sanyev

How to remove trailing zeros using EngineeringFormatInfo?

HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.

diluculo wrote:
HI,
I found a measurement studio formatter for SI notation.
For details, see the NI document.
Here, I want to know how to remove any trailing zeros. I could not find any information about this.
For example,
code : string result = string.Format(EngineeringFormatInfo.Default, {0:s5}, double value)
if value = 1.2345678E-3, result is 1.23457E-3. It is ok.
if value = 1.2E-3, result is 1.20000E-3. But I want to get "1.23m".
In labview, I usually use "%#.5p" format string.
I don't understand how you are getting 1.23457E-3 ? And claiming that is okay.
If you are using the format string that you claim you are using, then you should be getting 1.23457m.
It sounds like you are using string result = string.Format(EngineeringFormatInfo.Default, {0:E5}, value)

How to remove trailing zeros 20353675.0000000

All numeric decimal columns all are showing trailing zeros, how to remove them while processing within the query transform.
20353675.0000000
Thanks a lot for the helpful info

You can use the trunc function to remove the decimal places.
Syntax: trunc( number, [ decimal_places ] )
          <number> is the number to truncate.
         <decimal_places> is the number of decimal places to truncate to. This value must be an integer. If this parameter is omitted, the trunc function will truncate the number to 0 decimal places.
Eg:     trunc(125.815) would return 125
          trunc(125.815,0) would return 125
          trunc(125.815,1) would return 125.8
         trunc(125.815,2) would return 125.81
         trunc(125.815,-1) would return 120

How to remove Leading zeros from MATNR "at Database Level"

Hi,
When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
and for External Material No. , Leading Zeros Should be there. (In Database)
1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
This should slove the Purpose.
But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
2) We can Add or Remove leading zeros from MATNR at application level. i.e. we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine , That will Add Leading Zeros in MATNR While saving in the Database.
3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
But we dont want to Just "Display" material with OR Without Leading Zeros. we want to actually create materials in that way.
What can we do , so that at Database Level our changes are Reflected.
Thanks and Regards,
Anand Gore
Edited by: anandgore on May 18, 2011 3:47 PM

That will Add Leading Zeros in MATNR While saving in the Database.
That is because you have it configured that way. You can configure the storage as you desire. The default is the behavior you are describing. You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion. Also keep in mind that the MATN1 functions have their own BADI for extended formatting...

How to remove leading Zeroes in all fields in Payload

Hi,
How can I remove the leading Zeroes in every Filed I have in whole Payload Structure.there are around 10000 fields that have to be removed the leading Zeroes.any good idea please.
   <POSNR>000010</POSNR>
<MATNR>000002465640</MATNR>
<ARKTX>000012 KG D107</ARKTX>
<MATKL>00030010000</MATKL>
<WERKS>0000ORGC</WERKS>
<LGORT>0000GC55</LGORT>
<CHARG>000TEST</CHARG>
like this mutliple segments and multiple Fields.so I can take as whole payload with multiple fields should not have leading Zeroes.I can handle if they are 10 0r 20 fileds,but not like whole pay load/1000 fields right.
thank you,
Prem

Hi
You can have an additional XSLT mapping, to your existing one..
use copy-of & apply-templates to copy the whole tree & make changes recursively.
below is a sample code , the marked line is where you need to try your logic of trimming Zeros. (this code does upper case)
add this below code in your interface mapping object, as XSLT mapping, which does the job (only try putting your logic)
<xsl:stylesheet
                  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                  version="2.0">
            <xsl:output method="xml"
                        indent="yes"
                        omit-xml-declaration="yes"/>
            <xsl:template match="*">
                  <xsl:copy>
                        <xsl:copy-of select="@*"/>
                        <xsl:apply-templates/>
                  </xsl:copy>
            </xsl:template>
            <xsl:template match="text()">
                  <xsl:value-of select="upper-case(.)"/>
            </xsl:template>
      </xsl:stylesheet>
hope this fixes your issue
Regards
Vishnu

How to remove leading zeros from the screen?

Hello friends,
I am working on dialog programming.
I have a field with is NUMC 13. so when value is populated, It removes the leading zeros.
How can I display the my value with leading zeros on the screen painter?

Call SE51, layout, double-click on field, attributes, tab Program, check Leading zeros.
Regards,
Raymond

How to remove leading zeroes on form.

Hi all,
   Is there a way that I can remove the leading zeros that come along with the Serial number from showing in my form.
i.e for example: the value of &QALS-EMATNR&
Actual value in the databse table is : "0280012380",
Printing value on the form is            : "000000000280012380",
Now I should get the actual value of the field EMATNR
   I had tried with the ways like..
&QALS-EMATNR(Z)&
&QALS-EMATNR(CIZ)&
Is there any aternatives???
Thanks,
Surender.

Hi
If you print 000000000280012380 it means the value in the variable QALS-EMATNR is 000000000280012380.
The field EMATNR has MATNR as domain, this is a type char long 18, it has the routines MATN1 for input/output convertion and that routine doesn't delete the leading.
I think the option Z works for type number only, so u need to delete the leading zero before printing the data.
So just as somebody said u can use the fm CONVERSION_EXIT_ALPHA_OUTPUT in order to convert the output format, u should use it in driver program:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            input = QALS-EMATNR
       IMPORTING
            output = QALS-EMATNR.
If you can't change the program, u can create a routine (form) in a new program and call it by the sapscript:
/: PERFORM DELETE_LED_ZERO IN PROGRAM ZPROGRAM
/: USING       &QALS-EMATNR&
/: CHANGING &QALS-EMATNR&
/: ENDPERFORM
* &QALS-EMATNR(Z)&
So create the new program where defining the routine
FORM DELETE_LED_ZERO TABLES IN_TAB   STRUCTURE ITCSY
                                                        OUT_TAB STRUCTURE ITCSY.
DATA: MATNR TYPE MATNR.
READ TABLE IN_TAB WITH KEY NAME = ' QALS-EMATNR'.
IF SY-SUBRC = 0.
    MOVE IN_TAB-VALUE TO MATNR.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
          EXPORTING
               input = MATNR
          IMPORTING
              output = MATNR
    READ TABLE OUT_TAB WITH KEY NAME = ' QALS-EMATNR'.
    IF SY-SUBRC = 0.
       MOVE MATNR TO OUT_TAB-VALUE.
       MODIFY OUT_TAB INDEX SY-TABIX.
    ENDIF.
ENDIF.
ENDFORM.
Max

How to remove suceeding zeros

Similar Messages

Maybe you are looking for