How to remove the following from N97?

Hi,
I reported on these on Ovi Store and used there "report issue", but regarding these default things that are annoyingly useless on my device by default I couldn't complain there.
I need to remove Boingo, Qik & JoikuSpot. Every application on N97 has Options>Organize>Delete except these. Now, I noticed these are like shortcuts and not even an application or widget. So, how to remove/uninstall them?
Thanks.
Message Edited by mrmachd on 04-Jul-2009 04:27 PM

'Most of these applications will be removable only after you install them (i.e. go through the setup process).'
Are you for real? Or maybe you are a Boingo agent!
If you launch Boingo - even out of curiosity - it will install a locked access point at the highest priority in Connectivity/Destinations. Having done this quite innocently, the phone then could not connect to any data network - WiFi or Packet. The access point cannot be removed or edited. The only remedies to this are either relegate the access point to the lowest priority or do a hard reset on the phone. As I don't like having my phone hijacked by unwanted software, I chose the hard reset.
This is an error of judgement by Nokia - a lack of respect for their customers' choice of what **bleep** they want to keep on their phones and what **bleep** they want rid of.

Similar Messages

How to remove the "0" from the sum cell when the other cells are empty?

Hello!
When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
Thank you!
/Johan Strömbeck

Hi,
Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support

How to remove the Char.from one Operating Concern

Hi Guys,
How to remove the Char. from one Operating Concern.
I have created one Char. (WWDOC) and moved to Operating Concern (OOCC). Operating Concern is in red status.
Now, i want to remove that new assigned Char. (WWDOC)from the operating concern (OOCC). I did't find any option in the menu also.
Appreciate your help.....
T&R
VVR

Hi Sasi,
Iam not able to push back that char. from my operating concern. In help it is given you have to delete the data contents in the table before pushing back. Please let me know if any other option available.
Thanks for your reply.
VVR

How to remove the bookmark from the table of contents?

Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...

Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again!

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

How to remove the KF from cube .

How to remove the KF from cube , I am not able to .
When I drag the KF outside the structure , I am not able to .
Regards,

Hi Jain,
If data is available in the Info cube we can not Edit,delet and Add a infoobject.But In BI7.0 we a option called remodeling in administration Tab.By this we can add a new infoobject or we can delet it nad we can edit it also.
i hope this will help u
assigne point if this help u
Regarding
JT Goud

How to remove the underline from Title of a report.

How to remove the underline from Title of a report.
plz tell.

You have to go inside the title view :-)
Regards,
Stefan

How to remove the icloud from my pc

how to remove the icloud from my hp notebook. I removed the program but yet the device manager is still there.

says I cloud not been backed upin 12 weeks. plug in lock and connect to interent, but I cant get on internet and cant do anything while this box is there

How to remove the square from the icons when selecting them?

How to remove the square from the icons when selecting them?

hi jerry not quite sure what you mean, could you elaborate abit more please. lori

How to remove the Object from memory.

Hello.
Flash file that i made with Flex Builder uses memory too
much.
Look at the next example source code.
var testCan:Canvas = new Canvas();
this.addChild(testCan);
this.removeChild(testCan);
testCan = null;
but just memory usage still goes up, is not freed instantly.
so if i load the large flash files on my web browser,
after 5 munites or something, the web browser is down.
How to remove the object from memory immediately without
delay?

It's all about the Garbage Collector ..
There is a nice write up here :
http://www.gskinner.com/blog/archives/2006/06/as3_resource_ma.html

How to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

Hi Experts,
Can you please tell me to how to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
The main functionality of the user exit to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

How to remove the worksets from the Top level navigation for the ESS role.

Hi All,
I am working on enabling and disabling certain services in the ESS worksets.
we are using EP 7.0, ECC 6.0 (NW2004s).
When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
Thanks for your help
Regards
SM

Hi,
Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

How to remove the recursion from the following method

Hi All,
Can u plz help me to remove the recursion from the following method.
The problem here is that recursion cann't be removed easily here as there is no any end condition.
hopefully waiting for the help....
Reema.
private FilterStatement processCustomExpressions(FilterStatement statement,
          DistinguishedName tenant, LdapDao ldapDao)
          throws NameNotFoundException,
          LDAPServerException, NamingException {
     HashMap relMap = new HashMap();
     HashMap replaceMap = new HashMap();
     Vector relVec = null;
          FilterSubExpressions expressions = statement.getExpressions();
          FilterPartIterator it = (FilterPartIterator)expressions.iterator();
          while (it.hasNext()) {
               FilterExpression e = (FilterExpression)it.next();
               if (e instanceof CustomExpression) {
                    CustomExpression ce = (CustomExpression)e;
                    try {
                         FilterExpression fe = ce.createExpression();
                         if (fe instanceof RelationshipExpression) {
                              RelationshipExpression re = (RelationshipExpression)fe;
                              it.replace(re);
                              relVec = (Vector) relMap.get(re.name);
                              if(relVec == null) {
                                   relVec = new Vector();
                                   relVec.add(re);
                              }else {
                                   relVec.add(re);
                                   it.remove();
                              relMap.put(re.name, relVec);
                         } else if (fe instanceof SystemExpression) {
     SystemExpression se = (SystemExpression)fe;
     it.replace(se);
                    } catch (FilterEvaluationException fe) {
                         traceLogger.exception(Level.DEBUG_MIN, this,
                              "processCustomExpressions(" + statement.toString() + ")", fe);
                         SystemLog.getInstance().logError(this,
                              "processCustomExpressions(" + statement.toString() + ")", fe.getMessage());
          replaceRelationshipExpressions(statement, tenant, ldapDao, relMap);
          processContainerBasedExpressions(tenant, ldapDao, relMap, replaceMap);
          FilterSubStatements statements = statement.getStatements();
          FilterStatement temp = null;
          if (statements.size() != 0) {
               FilterPartIterator iter = (FilterPartIterator)statements.iterator();
               while (iter.hasNext()) {
                    temp = (FilterStatement)iter.next();
                    temp = processCustomExpressions(temp, tenant, ldapDao);
                    iter.replace(temp);
          if(!replaceMap.isEmpty())
               return replaceContainerBasedExpressions(statement, replaceMap);
          return statement;
     }

I think one of the reasons that noone will reply to your posting is that you take it a bit too easy. First of all, please use the "code" button to format your code listings. Then it will look like this (see below) and everybody can at least read it!
private FilterStatement processCustomExpressions(FilterStatement statement,
                                                DistinguishedName tenant,
                                                LdapDao ldapDao)
        throws NameNotFoundException, LDAPServerException, NamingException {
    HashMap relMap = new HashMap();
    HashMap replaceMap = new HashMap();
    Vector relVec = null;
    FilterSubExpressions expressions = statement.getExpressions();
    FilterPartIterator it = (FilterPartIterator) expressions.iterator();
    while (it.hasNext()) {
        FilterExpression e = (FilterExpression) it.next();
        if (e instanceof CustomExpression) {
            CustomExpression ce = (CustomExpression) e;
            try {
                FilterExpression fe = ce.createExpression();
                if (fe instanceof RelationshipExpression) {
                    RelationshipExpression re = (RelationshipExpression) fe;
                    it.replace(re);
                    relVec = (Vector) relMap.get(re.name);
                    if (relVec == null) {
                        relVec = new Vector();
                        relVec.add(re);
                    else {
                        relVec.add(re);
                        it.remove();
                    relMap.put(re.name, relVec);
                else if (fe instanceof SystemExpression) {
                    SystemExpression se = (SystemExpression) fe;
                    it.replace(se);
            catch (FilterEvaluationException fe) {
                traceLogger.exception(Level.DEBUG_MIN, this,
                            "processCustomExpressions("
                            + statement.toString()
                            + ")",
                        fe);
                SystemLog.getInstance().logError(this,
                            "processCustomExpressions("
                            + statement.toString()
                            + ")",
                        fe.getMessage());
    replaceRelationshipExpressions(statement, tenant, ldapDao, relMap);
    processContainerBasedExpressions(tenant, ldapDao, relMap, replaceMap);
    FilterSubStatements statements = statement.getStatements();
    FilterStatement temp = null;
    if (statements.size() != 0) {
        FilterPartIterator iter = (FilterPartIterator) statements.iterator();
        while (iter.hasNext()) {
            temp = (FilterStatement) iter.next();
            temp = processCustomExpressions(temp, tenant, ldapDao);
            iter.replace(temp);
    if (!replaceMap.isEmpty())
        return replaceContainerBasedExpressions(statement, replaceMap);
    return statement;
}Second, when you cannot understand your own code anymore, simplify it! As far as I can see, there are two "main" processes (i.e. loops) in your method, where the second one calls the method recursively. Split the method into two. Furthermore, write a third method that processes the iterated elements and call that method from out of the loops.
I did'nt analyse your method and have no idea what it does at all. I'm merely telling my first impression.
Good luck.

How to remove the WiSM2 from the Catalyst 6500 series switch?

Hello, can you explain to me how to safely remove the WiSM2 from the Catalyst 6500 series switch?
According to the documentation "Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note":
To remove the WiSM2, perform these steps:
Step1     Shut down the module by one of these methods:
In privileged mode from the router prompt, enter the hw-mod module mod shutdown command. NoteIf you enter this command to shut down the module, you must enter the following commands in global configuration mode to restart (power down, and then power up) the module:
Router# no power enable module modRouter# power enable module mod
If the module does not respond to any commands, press the SHUTDOWN button located on the front panel of the module.
Step2     Verify that the WiSM2 shuts down. Do not remove the module from the switch until the POWER LEDis off.
But, in the case of Step1 (1st methods) I do not see a option "shutdown" in the command "hw-mod module 3"...
All I prompted to enter is:
c6500#hw-module module 3 ?
boot           Specify boot options for the module through Power Management Bus control register
reset          Reset specified component
simulate Simulate options for the module
Is it hidden options? IOS version of c6500 is 12.2(33)SXJ1
In the case of Step2 (2nd methods) there is not any button on the front panel of the module?
And yet, it is better to remove the module configuration manually or use the command module clear-config prior to removing the module?

Good catch.
Which one is true, will get back to you on this if i've something soon.
http://www.cisco.com/en/US/docs/wireless/module/wism2/installation/note/WiSM_2.html#wp34727
The above link is procedure to remove wism2. This procedure doesn’t look like wism2 is hot swapable.
http://www.cisco.com/en/US/docs/wireless/module/wism2/installation/note/WiSM_2.html#wp34621
All modules, including the supervisor engine (if you have redundant supervisor engines), support hot swapping. You can add, replace, or remove modules without interrupting the system power or causing other software or interfaces to shut down. For more information about hot-swapping modules, see the Catalyst 6500 Series Switch Module Installation Guide.

How to remove the focus from a tree?

Hello,
how can I remove the focus from a tree, so that
none of the elements in the tree is selected?
I have tried using the following methods:
setTreeSelection(null);
setLeadSelection(IWDNode.NO_SELECTION);
None of them worked.
Any help highly appreciated.
Greetings,
Tomek.

Hello,
it seems I have found a (dirty) workaround to this
problem. If anyone is interested, details below:
When the user clicks on a tree node (say A tree),
I do the following:
1. request focus on the tree selected by the user
   (say B tree):
IWDTree foldersTree =
    (IWDTree)thisView.getElement("TreeFolders");
foldersTree.requestFocus();
2. invalidate the A tree (which causes the tree
   to disappear)
wdThis.wdGetContext().nodeInbox().invalidate();
3. recreate the A tree (filling the context nodes)
4. unselect the A tree:
wdContext.nodeInbox().setLeadSelection(IWDNode.NO_SELECTION);
Thanks a lot to all of you who have responded.
Greetings,
Tomek.

How to remove the following from N97?

Similar Messages

Maybe you are looking for