How to remove the heatsink on the NX6800?

Hi, I'm trying to remove the heatsink on my NX6800 (non-ultra). I have the copper heatsink, not the newer, noisier one that I've seen some people complain about here. I've removed all the screws on the back of the card, but the cover seems to stick as firmly as it did before I removed the screws. There are still four screws in the center of the card, but they're on the front side of the card, under the heatsink (I only see them come through on the back side), so I don't see how I can get to them before I remove the heatsink. What should I do next? I don't see anything more that I could unscrew to get the cover off, and yet the cover sticks to the card as if there were screws holding it in place. Please help me if you have any experience with these heatsinks.
By the way, I did search the forum before I posted this, and found a somewhat similar thread: https://forum-en.msi.com/index.php?topic=71416.0 . The poster in this thread, however, said that he'd removed "all the screws"; I don't know whether that means that he'd also removed the four screws I mention above, which would mean that he'd already gotten further than I have (and thus the advice he got wouldn't necessarily apply to my situation.)

Hi,
Crull (one of the best posters here IMO ) had this reply in another thread:
"Could also be double sided thermal tape. If this a retail or OEM video card I also doubt they would use thermal epoxy.
It most likely is thermal tape or compound.
If twisting doesn't seem to be working. You can try this. You want to take a flat flat head screw driver and wrap the end tightly a few times with a small piece of printer paper. That will protect the board, you want to slide the screwdriver end with the paper under a corner of the heatsink where there are "NO COMPONENTS" and gently pry the corner up with the screwdriver by a lever or twisting action . If it's thermal tape it should lift the heatsink. Once you get one corner up move the screwdriver all around the heatsink to pry the rest off.
If your worried about damage from the screw driver, you can take an old cd and break it so you have a small piece to place under the screw driver to protect the board.
If it is epoxy for sure the freezer method might work. Put the card in a sealed plastic bag and then put it in the freezer overnight. Then try removing the heatsink by twisting gently. I wouldn't use the card until it warms back up close to room temperature. It might be too much of a shock to some components on the card."
Good Luck and proceed at your own risk.

Similar Messages

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

How to remove the sort function on the drill down and then save

how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.

I do not think that option is possible.
Regards,
Venkata Boga.

How to remove the white space that is now above the main images on each page?

http://www.nydogworks.net
Hello,
I took over updating some things on my site from my web designer. The main images on each page used to be flush with the navigation bar on each page. Now there is a white space in between each one. Can you tell me how to remove the white space?
<div id="container">
<div id="imgholder"><img src="images/feature-aboutus.jpg" width="951" height="341" alt="" />
</div>
<div id="pageContentNoside">
   <div id="sideSub">
     <form action="form.php" method="post" name="form2" id="form2"> <table width="250" border="0" cellpadding="2" cellspacing="2">
       <tr>
         <td width="273"><h2>Quick Contact</h2></td>
         </tr>
       <tr>
         <td class="mainContent">Your Name</td>
         </tr>
       <tr>
         <td><span class="style9">
           <input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Your Email Address* (required)</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Phone Number</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="phone" type="text" class="colorfieldssmall" id="phone" />
           </span></td>
         </tr>
       <tr>
         <td><span class="mainContent">Type of Dog Training</span></td>
         </tr>
       <tr>
         <td class="mainContent"><span class="style9">
           <select name="need" class="colorfieldssmall" id="need">
             <option value="select one">select one</option>
             <option value="Basic Obedience">Basic Obedience</option>
             <option value="Behavior Therapy">Behavior Therapy</option>
             <option value="Board and Train">Board and Train</option>
             <option value="Off Leash Training">Off Leash Training</option>
             <option value="Puppy Training">Puppy Training</option>
             </select>
           </span></td>
         </tr>
       <tr>
         <td> </td>
         </tr>
       <tr>
         <td><div align="left">
           <input type="submit" name="submit" id="submit" value="Submit" />
           </div>
           </td>
         </tr>
       </table></form>
     <h2><br />
       Dog Training Services<br />
       </h2>
     <ul id="subnav">
       <li><a href="basic-obedience.html">Basic Obedience</a></li>
       <li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
       <li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
       <li><a href="off-leash-training.html">Off Leash Training</a></li>
       <li><a href="puppy-training-program.html">Puppy Training</a></li>
       </ul>
     <br />
     <br />
     <br />
     </div>
<div id="suggestPost"><a href="https://www.facebook.com/pages/NYDogWorks/219268038151244?fref=ts" ></a></div>
   <div id="mainContent">
     <h1 class="copyrightType">About NY DogWorks</h1><br />
     <h2> <span class="testimonal">The Owner of NYDogWorks</span>      </h2>
     <p><span class="copyrightType"><img src="images/dogpic.jpg" alt="Dog Behavior Therapy" width="183" height="275" class="h_img_float_right" /></span><strong>NYDogWorks L.L.C. is owned and operated by Master Certified Dog Trainer and Behavior Specialist Brian DeMartino. </strong><br />
       <br />
       His training is hands down the best out there. He has become one of the most sought after dog trainers throughout Long Island, Manhattan, & New York.<br />
       <br />
       With over 15 years experience training and rehabilitating some of the toughest cases of dog behaviors. He’s Mastered the Art of teaching top knotch obedience and manners with outstanding results and has developed the most full proof and guaranteed system to fully housebreak any puppy or dog in the shortest amount of time.<br />
       <br />
       He is Certified in dog training and dog behavior and is an Official Evaluator for the American Kennel Club’s (C.G.C) Program.<br />
       <br />
       <br />
       <strong>All About NYDogWorks</strong><br />
       </p>
<p><br />
</p>
     <p>NYDogWorks Dog Education, is a Professional Dog Training Company offering dog training for puppies and older dogs through customized in-home training programs by Master Certified Trainers in Nassau County, Suffolk County, Hamptons, Long Island, Manhattan, Brooklyn, Bronx, Queens, Rockland County, Westchester County, Orange County, and Bergen County New Jersey. NYDogWorks offers obedience training, Housebreaking, Manners, socialization for your dog, Puppy Training and Education, Behavior Therapy, Trick Training, Agility, Complete Off Leash Training, Sport Work, and Personal Protection Training. <br />
       <br />
       <strong><br />
         NYDogWorks Boarding & Training Programs</strong><br />
       </p>
<p><br />
    We offer boarding and training programs done in the home of owner, Brian DeMartino. This is a customized 2-6 week program to suit your dog's needs, great for someone who feels they do not have the time or patience to train or rehabilitate their dog at their home. This is a 100% guaranteed program. Your dog will stay with us for no additional charge if we feel that he or she has not learned all that was agreed upon. We guarantee that if there is any regression within 3 months of your dog being back home with you, he/she will come back to us for no additional charge.<br />
    <br />
    <a href="board-and-train-dog-program.html">View Boarding & Training Programs</a></p>
     <p><br />
       </p>
     <p><br />
       <br />
</div>
   <div id="breadCrumbs">
     <p><a href="index.html">Home</a> > NY DogWorks - About Certified Dog Trainer Brian DeMartino<br />
       <strong>Serving all of Long Island, Nassau & Suffolk County, Manhattan, Brooklyn & Queens</strong></p>
     </div>
</div>
    <div id="footer">
      <div id="footermenu">
      <div id="footermenu1">
      </div>
    </div>
   <div class="phoneNumber" id="copyright"> Copyright © 2014 NY DogWorks</div>
     <div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a>     </div>
</div>
</div>

You should be able to add the following snippets of css to your stylesheet to fix that.
In the mainstyle.css file, change...
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
to
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
overflow:hidden;

How to remove the Option "Only Refer Excise Invoice "from MIGO

Hello,
We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
1)Only Cature Excise Invoice
2)Only Refer excise Invoice
3)Only Part1
4)No excise Entry
As per my client requirement then only need two options in MIGO.
1)Only Part1
2)No excise Entry
Bcz they want to Capture and Post excise Invoice in J1IEX only...
I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
Regards
sapman

Hi,
You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

Urgent help: How to remove the accumaltion when show movies step by step with buttons

I want to show the movie step by step by clicking the next
button. Inside each frame, many movie clips are generated
dynamically at runtime, and they can be played interactively.
I achieves the step-by-step display of those frames by adding
another layer with the action stop(). But I got one trouble: all
the movie clips from previous frames are accumalted. How to remove
the accumulation from previous frames?
For the continuous display of the movie, I tried to use
onEnterFrame() and change the _visible property of all the movie
clips to false in this function. But it doesn't work for the
step-by-step display. Once I click the next button, the movie clips
at the current frame just show very quickly, then disappear. What
should I do?
I need to fix this immediately.
Your help would be greatly appreciated.
- zcx

you can use the removeMovieClip() method for those movieclips
added dynamically.

How to remove the pop-up window ''Wireless Radio Status" for t430s

Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!

I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5

How to remove the credit card from the Apple id?

how to remove the credit card from the Apple id?
plz ITS urgently

If the option to select "None" isn't appearing when you attempt to edit your payment information, then there is likely a billing issue with your last iTunes Store purchase(iTunes didn't receive payment from your credit card company for that order). Before you can remove your credit card, you have to pay for the unpaid order. You can call your credit card company and troubleshoot the billing issue with them, or try another card, or if you live in a country that supports iTunes Gift Cards, you can redeem one of those to pay for the order. Once you have done that, you should be able to remove your credit card info as outlined in http://support.apple.com/kb/ht1918

HT2589 How to remove the credit card details from itunes?

How to remove the payment details from itunes?

Click "Account" under Quick Links at the top right of the iTunes store. Next to payment information click "Edit" and then select "None" under payment method.
On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
If "None" is not an option, you may want to contact iTunes support:
http://www.apple.com/support/itunes/contact/

How to remove the old email address that was hacked from my iCloud account when iCloud won't let me?

How to remove the old email address that was hacked from my iCloud account when iCloud won't let me?
Pretty much the the email that I used (but didn't verify) to create my iCloud account was hacked and now I can't remove it from my iCloud account due to the iCloud password also being changed by the same person and the fact I had "Find my iPhone" app on my phone also??? I had to change my iTunes email as well but that was far easier so yeah :S.
Please help. I live in NZ, out in the country, so reception is rare and so is getting into the nearest town that has an Apple Store.
Thanks

If you truly change your existing Apple ID's email address to a new email address, follow these instructions: iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
If you created a whole new Apple Account because you couldn't access the old one after being hacked, you will need to contact the Apple Account Security Team. Apple ID: Contacting Apple for help with Apple ID account security

How to remove the OR clause in this query?

Hello Everyone,
I have this query where i have a lot of joins and in the where clause there is a ISNULL and conditions based on OR clause.
How to remove the use of the OR clause which may cause performance problems? Can anyone suggest a method to remove the OR clause?
select RS.PLANNEDSTART,
OD.ESTSHIPDATE
FROM TABLE1 RS(NOLOCK)
   INNER JOIN TABLE2 SS(NOLOCK)
   ON RS.ID1             = SS.ID1
   INNER JOIN TABLE3 AM(NOLOCK)
   ON AM.KEYID       = SS.KEYID
   INNER JOIN TABLE4 OD(NOLOCK)
   ON SS.KEYID= OD.KEYID
    INNER JOIN TABLE 8 DR
   ON
WHERE           (isnull(RS.DATE1,'1970-01-01 00:00:00.000') ='1970-01-01 00:00:00.000'
                 AND OD.DATE1 between @Beginning_Route_Date and @Ending_Route_Date)
             OR
             RS.DATE1!='1970-01-01 00:00:00.000'
               AND RS.DATE1 BETWEEN @Beginning_Route_Date and @Ending_Route_Date)
Regards
Gautam S
Gautam S

this is one way avoiding OR clause
WHERE CASE WHEN isnull(RS.DATE1,'1970-01-01 00:00:00.000') ='1970-01-01 00:00:00.000'
THEN OD.DATE1 ELSE RS.DATE1 END between @Beginning_Route_Date and @Ending_Route_Date)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Hello! The question is this. In London, took the Iphone 5 as sim free, flew to Moscow put Simcoe, and he writes me that is locked to the operator O2. Can anyone encountered this problem? What to do? How to remove the Unlock?

Hello! The question is this. In London, took the Iphone 5 as sim free, flew to Moscow put Simcoe, and he writes me that is locked to the operator O2. Can anyone encountered this problem? What to do? How to remove the Unlock?
<Edited by Host>

Look at your receipt. Does it say unlocked? It is possible to purchase both locked "sim free" and unlocked iPhones from Apple.
ONLY the carrier an iPhone is locked to can legitimately unlock it.
IF your receipt says that it was supposed to be unlocked, and it is not, call AppleCare. They should be able to straighten it out.

In the libary of iPhoto I do have double pictures only in the year 2006. Can someone please tell me how to remove the double pictures. I did rebuilt the libary but that solution did not help me any further.

In the libary of iPhoto I do have double pictures only in the year 2006. Can someone please tell me how to remove the double pictures. I did rebuilt the libary but that solution did not help me any further.

I think the warning is very clear.
What warning? Where do you say that this plan you suggest will lose at least some, and possibly a whole lot of metadata, plus the original files of edited photos. This is significant dataloss. And you should warn people that this is the case.
While your metadata and originals may not be important to you, that is not necessarily the case for other users.
Fourthly, and last, cleaning the iPhoto library should be done at least once per year
This is nonsense. The iPhoto Library has no need of "cleaning" and certainly not in any way that trashes a whole lot of data.
I'm very impressed that you assess the application based on the sound of the name. It's not a common way to review applications, but I'm sure it has some merit.
FWIW it has been recommended on this - and other - sites for many years and has proven safe and effective.
Regards
TD

How to remove the default members of a dimension from the control table?

Hi all,
I am new to hyperion FDM 11.1.1.2.0.0 .
When I navigate to Metadata>Control Tables and try to delete the default memmbers
for the dimension like category and period i got the following error.
Error: Period( 8/31/2009 ) is an active Global or Local Period and cannot be deleted.
Then again i unchecked active checkbox for that dimension from Hyperion Essbase Integration Setup of Workbench Client.
After doing that i got the following error
Error: Unable to retrieve target System Data.
Can anyone tell me how to remove the default members of a dimension from the control table?
Thanks

Create a new record for the table.
Go change the POV to the new record.
Return to the control table and delete the default record.

How to remove the heatsink on the NX6800?

Similar Messages

Maybe you are looking for