How to remove the margin of the workspace? Obszar roboczy - dodatkowy margines ?
Hello,
I have a problem which can not cope. How can I remove the red frame which is in about the working areas? This is an allowance ...
Witam,
czy wiecie może jak wyłączyć / odznaczyć czerwony margines wokół obszaru roboczego ? Włączyłem przez przypadek i nie mam pojęcia jak mogę to wyłączyć a tworzy mi białą ramkę po wyeksportowaniu pliku do druku ...
Go into Document setup, and set bleeds to 0.
Similar Messages
-
How to remove available downloads from the list
how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?
There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.
-
How to remove SD Card from the Card Reader slot - Satellite A100?
Hi,
Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
ArjunHi
In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps -
How to remove links pointing to the same page?
I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, WindowsStart by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576 -
How to remove unused objects from the webcatalog In OBIEE11g
Hi,
I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
Thanks
Deva
Edited by: Devarasu on Nov 29, 2011 12:06 PM
Edited by: Devarasu on Nov 29, 2011 3:15 PMHi,
Checked with Oracle Support team and confirmed below points
--> incorporated into the Current product and consider as BUG it may resolve future release
--> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
Treated as Bug
Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
FYI:
SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
Thanks
Deva -
How to remove "all day" as the default setting in iCal?
How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.
Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie -
How to remove blank spaces in the source code of my page?
I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
<dsp:droplet name="ProductLookup">
<dsp:param name="id" value="xprod2046" />
<dsp:param name="elementName" value="product" />
<dsp:oparam name="output">
<dsp:valueof param="product.DisplayName"/>
</dsp:oparam>
</dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
ThanksHi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
----%><dsp:droplet name="ProductLookup"><%--
----%><dsp:param name="id" value="xprod2046" /><%--
----%><dsp:param name="elementName" value="product" /><%--
----%><dsp:oparam name="output"><%--
----%><dsp:valueof param="product.DisplayName"/><%--
----%></dsp:oparam><%--
----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param> -
HT2500 Does anyone know how to remove a group from the address panel in mail?
Does anyone know how to remove a group from the address panel in mail?
I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?
-
When I create my Ebay invoices, (which are generated through the browser in a new window) data is also generated at the top and bottom that I don't want to show on the invoice. The data is the date and time at the bottom, together with the page number, and at the top it shows the web location. In Explorer, you can remove this before printing but I can't work out how to do it in Firefox. Help please!
Hello!
You can change that in Page Setup, choose the "Margins & Header/Footer" tab and chose "--blank--" instead of the data that you don't want it to appear.
You can visit [https://support.mozilla.org/en-US/kb/how-print-websites#w_margins-and-header-footer How to print websites] for more details.
I hope that helps,
Have a nice day -
How to remove blank lines in the end of list .
hi,
in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
so plz help me how to remove the blank lines here and immediately print the endof page.Hi,
will this work for you.
SET BLANK LINES OFF.
These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
Regards
Viswanath Babu -
How to remove characters/lines from the beginning of an InputStream
Hi,
I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
To make it simple, what I need is a method that looks like the following, or something similar
* Removes n number of lines from the beginning of a InputStream.
* @param is InputStream where the lines are removed
* @param numberOfLines int value to indicate how many lines whould be removed
* @return InputStream where lines have been removed.
public InputStream removeLines(InputStream is, numberOfLines);Thanks.Here's the code, feel free to use it. Comments are also welcome.
public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
char c = 'c';
int i = 0;
for(int n = 0 ; n < numberOfLines ; n++)
do
c = (char)is.read();
System.out.print(c);
if(c == (char)-1) // end of stream reached before any newline characters were found.
return null;
i++;
while(c != '\n');
System.out.println();
System.out.println("Characters removed:" + i);
System.out.println("n: " + n);
i = 0;
return is;
}Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
Fixed a bug. -
How do remove commitment value in the PO ? any SAP note avl?
Hi,
Project (WBS)releated service PO (Account assignment category P and Item category D), in which SES,GR,IR have been completed for entire Project services for the year 2005,PO history also updatd for SES, GR,IR in the 2005 only.But Now system is showing still commitment value in the PO for the year 2009?.
Henece how do remove the inconsistency of the commitment value in the PO for the year 2009?. (i.e value is comming from COOI table entry).Is there any SAP NOTEs are available for this case?
Note:
But this case no PR has been refered in the PO. PO has been directly created, and PO QTY,Value changes have not been done after SES,GR,IR completion.
But still system commitment value is showing in the PO for the year 2009, so HOW do remove the value?
i am looking suitable answers.
Regards,
kumarHi,
Pre-requisites for a commitment update are:
o In transaction OKKP, the commitment management indicator must be
active for the given controlling area in the current fiscal year.
The controlling area is the highest organizational unit in Controlling,
however this area is missing from the accounting data of the PO.
o The accounting objects must be active for commitments:
- Work orders: The commitment management indicator must be set
in transaction KOT2 for the given order type.
- Cost centers: In transaction KS02, in register "Control", the
commitment update indicator must NOT be set.
- Projects: see note 47992
o In transaction CUNI, the unit of measurements used at item level
must be set to value based commitment.
Please check the following notes 152571, 634298, 459509 and
772206 carefully and also 165823.
Please check also if the "delivery complete" indicator is set in the PO item (see note 735404).
Usually for service POs the "Delivery completed" indicator will be
hidden and this indicator is fully controlled by the "final entry
sheet" indicator in ML81N. You must allow to set this indicator trough a field selection customizing for your PO item.
Regards,
Edit -
How can I remove duplicate songs from the iPhone4. The duplicates are not listed in the computer iTunes library.
The simplest thing may be to back-up and then restore the iPhone. If you don't fancy that then remove all media that is currently synced to it, then double check and manually remove any media that remains on the device, before reselecting your sync options.
If you've been manually managing the device and your library doesn't contain copies of all your media then see Recover your iTunes library from your iPod or iOS device.
tt2 -
How to remove Variables Personalization in the BEx Analyzer?
Hi All, Help us. Say please:
1. How to remove personal Variables Personalization for query/user in the BEx Analyzer with standart tools?
2. How to disable personalization button on varible screen?
Our users very often click this "bad" button and after that can't to find required criteria on selection criteria screen. We've studied BW Guides and Forum materials (may be not very thoroughly), but search usefull information only for Web Reporting. We've search corresponding table /BI0/APERS_VAR00 but fear to edit it directly.
Best regards, IgorHi All,
I think that best way to remove personalization of any var or infoobject could be done through the next logic.
we have ODS <b>0PERS_VAR</b>.
we need to remove line from this ODS with specific parameters like USERNAME and VAR_NAME or IOBJ_NAME.
<b>Step by step instruction</b>:
1. Create <b>update rule</b> from ODS 0PERS_VAR to the same ODS.
2. Write <b>'Start routing'</b> to update ODS with the next ABAP-code
LOOP AT DATA_PACKAGE.
DELETE FROM /bi0/apers_var00
WHERE tctusernm = DATA_PACKAGE-tctusernm AND
( tctvarnm = DATA_PACKAGE-tctvarnm OR
tctiobjnm = DATA_PACKAGE-tctiobjnm ).
DELETE DATA_PACKAGE.
ENDLOOP.
3. Activate update rule.
4. Update ODS Data in Data Target with <b>'full update'</b> !
5. At the selection screen of info-package <b>specify fields</b>
< 'TCTUSERNM' - username > AND
< 'TCTVARNM' - var name > OR < 'TCTIOBJNM' - infoobject name >
PS:\ As result <b>personalisation will be reseted selectively</b>.
if it help you, it is a chance to donate some points to me
best regards -
How to remove text without destroying the picture?
I am new in photoshop and I am trying to remove the text down of the picture so that I can add another one.
Is watermark, I have seen sosme videos on Youtube but seems didn't work so well to me.
If someone can help how to do delete that text and add another one similar with it I would really appreciate it.
Thanks in advantageContact the owner of the copyright for permission to use without the watermark.
Maybe you are looking for
-
Serious error using merged clips
Premiere crashes when I try to use a merged clip. When I double click on the clip it loads into the preview panel, but when I perform any actions such as overwrite or insert or if I right-click on the clip I get this message: "Sorry, a serious error
-
Change Management and Target Group in STMS
Hello, We use the Change Management (SolMan 4.0). Up to now it works fine. We deliver always one client in the System (E33.002; T33.002 and P33.002). Now we try to change this. We will deliver more than one client in every system at the same time (to
-
What's the syntax for Insert statement in Servlet?
I'm trying to insert record into table using servlet. Can you please show me the statement and syntax of how to use it?
-
Enable service of objects -workflow overview-workflow log for IDOCS?
Hi everyone, I need to enable service of objects -workflow overview-workflow log for IDOCS. Using object key i know how to go to log.Users need that functionality to be enabled for Idocs.For po and pr I can see so its not parameter settings.I feel it
-
i dont know the previous user of this iphone and i'm stuck on the iphone icloud activation process. what should i do?