How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

Similar Messages

How do I forward calls from my iPhone4? The option seems to have disappeared from the settings - phone prompt

The option seems to have disappeared from the settings - phone options

With the settings changed on the iPhone4, why the iPad Air? I downloaded the apps to it. Then chose to delete them, which works. I just have to remember to delete them from iTunes12 eventually.

The options tweet and facebook disappeared from the notification bar! What do I do?

The options tweet and facebook disappeared from the notification bar! What do I do?

Any restrictions set up in Settings/General/Restrictions?

I bought pages on the app store and have math type installed. However I am do not have the option to "Insert Mathtype Equations" either with right click or the drop down menus at the top of the screen.

I bought pages on the app store and have math type installed. However I am do not have the option to "Insert > Mathtype Equations" either with right click or the drop down menus at the top of the screen. I also have OS Lion installed if this makes any difference. Please help!

I assume but I can't check that MathType rely on the standard iWork applications location which isn't the one used by the mac App Store.
Create a subfolder named iWork '09 in the Applications folder.
Select the iwork applications which you own then drag them into the iWork '09 folder.
You will be asked to type your password. Don't worry, it's normal.
It's required because the System must store the infos describing the new location so that, if a new revision is delivered, mac App Store will be able to find the apps where they are.
When this will be done, try to re-install MathType.
I guess that this time it will behave flawlessly.
Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 16:48:19
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Powershell Script to change the default user Account picture for all users in windows 7 and 8

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev
The default user account picture is stored here.
C:\programdata\Microsoft\User Account Pictures\user.bmp
It should just be a matter have copying the picture you want to that location and over writing what is there.
or....
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
You can also configure this by a registry setting;
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
UseDefaultTile = 1
The picture that you configure, will not be loaded until the user account will actually be created on the pc. Meaning the first time a >new< user will log on to a pc, they will have no picture shown at all using their login screen (this is default
behavior). Same will occur if you enable the policy don't display last user name. However, once they log in the picture will be shown in the start menu, and if they lock their pc the image will also be shown

How to remove boot options while booting in mac with the options key

I've just installed windows trough bootcamp, but somethings went little bit wrong,
Everythings works fine, mac works and windows 7 works properly. But when i hold down the option key while booting i dont have the normal 3 options (Mac, Windows, Mac Restore). I now see these options (MAC, Windows, Windows, Windows efi, mac restore).
MAC -> works fine
1e windows -> (error no operating system installed)
2e windows -> works fine
3e Efi windows (boots into mac)
MAc restore -> works fine
So is there an way to clean up these options?
Thanks

You think someone will use Boot Camp Assistant?
EFI is / was always there. Sometimes it shows up (from using Disk Warrior).
Windows has its own 100MB system reserved as well that is the boot area.
I'd start with Lion Recovery, show hidden features and partitions, and check the health of all, and repair HFS volume.
Also try your Windows DVD and see if it sees a problem.

How can I set a default action when I right click on a file in finder

so that it opens Outlook 2011. This seems to be the only way to email from finder however I can't seem to set the option to remain in the menu and have to go through the steps each time.
I go through this process now.
right click file-open with-other-choose outlook in apps, then it opens the new mail with attachment screen and I am right to go.
I would like to have outlook as the list of options under "open with" currently it offers word, safari, text editor and a couple of others.
Sometimes I send PDF's JPG, Text etc so never the same type of file.
Thanks.

so that it opens Outlook 2011. This seems to be the only way to email from finder however I can't seem to set the option to remain in the menu and have to go through the steps each time.
I go through this process now.
right click file-open with-other-choose outlook in apps, then it opens the new mail with attachment screen and I am right to go.
I would like to have outlook as the list of options under "open with" currently it offers word, safari, text editor and a couple of others.
Sometimes I send PDF's JPG, Text etc so never the same type of file.
Thanks.

The "combine supported files in acrobat" option is missing from my right click menu

Usually, When I have documents that I want to combine, I select them and then right click and choose the "combine supported files..." options.
However, from one day to then next the option is not there.
Your help would be most appreciated.
Thanks

Apparently Adobe installed an update and my computer needed to be reset.
It is now working once again.
Thanks for your help!!

When I updated to the recent Firefox version, it removed my second set of storage folders from the left side of the email window. These folders were connected to a second email address forwarded through Firefox. How do I retrieve them?

These files are vital. Are they somehow archived?....I hope. If this cannot be fixed then I want to know how to get bak the other version I had in tact.

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

I am using Firefox 3.5.9 in Linux Gnome and need to remove the "Set As Desktop Background" from the right click menu or at least disable the users ability to change it from Firefox as I am running a kiosk.

USeing Suse Linux Enterprise Desktop 11SP1 with gnome desktop and Firefox 3.5.9. I have created a firefox user profile and need to remove or restrict the ablitiy of the users to change the desktop background.

See http://kb.mozillazine.org/Chrome_element_names_and_IDs
Add the code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
<pre><nowiki>#context-setDesktopBackground {display:none!important;}
</nowiki></pre>
See also http://kb.mozillazine.org/Editing_configuration

How to remove previous owner's Apple ID request from App Store?

When I try to update an app App Store asks for the previous owner's Apple ID and not for my Apple ID. How can I change it to ask for my details?How to remove previous owner's Apple ID from App Store?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Remove an item from right-click menu?

How do I remove an item from a right-click menu? An application I installed but later removed placed an item on my right-click menu. I want to remove the right-click item it placed there. I've looked in .../user/library/contextual menu and /library/contextual menu but don't see anything there that suggests it might be related.
Thanks.

I suddenly realized this was a FireFox Add-on. Once I realized that it was easy to go to Add-on menu in Firefox and remove it.
Problem solved.

Set trusted protocols for all users

we can´t find out how to add our protocol to registry (trusted protocols) for all users.
we are developing office addin, which enable insert special link to word document in format like this:
corinth://app/foo?p1=vegetarian&p2=food
our protocol is associated with our metro app, user click opens our metro app with some parameters which opens app and sets the app state using parameters contained in link
Because our protocol is not trusted for all users, the annoying alert message appear, if user click on our link. Issue described here: https://support.microsoft.com/kb/925757?wa=wsignin1.0
only way we have is adding our protocol to current user registry, like this:
[HKCU\Software\Policies\Microsoft\Office\11.0\Common\Security\Trusted Protocols\All Applications\corinth:]
What we have tried?
* put it under same path in HKLM, but it doesn´t work.
* registry propagation described in http://blogs.msdn.com/b/mshneer/archive/2007/09/04/deploying-your-vsto-add-in-to-all-users-part-i.aspx, but this solution were unable to write under security node
Do you have any idea, how to solve our problem? How registr our protocol for all users?
Edit: added link describing trusted protocols issue

thanks for reply.
But, your answer doesnt solve our problem. Maybe my question is imprecise. We have no problems to deploy VSTO addin for all users, also we have our certificate and we are trusted publishers. We have problem with settings our protocol as trusted for
all users. I apologize, becouse i inserted incorrect link to allert message, which points to trusted publishers issue. Correct link to our issue is https://support.microsoft.com/kb/925757?wa=wsignin1.0. What we need is set this registry HKCU\Software\Policies\Microsoft\Office\11.0\Common\Security\Trusted
Protocols\All Applications\corinth: for all users, not only for current user. Registry propagation described in your first link is not working as i wrote in my original question:
"* registry propagation described in http://blogs.msdn.com/b/mshneer/archive/2007/09/04/deploying-your-vsto-add-in-to-all-users-part-i.aspx,
but this solution were unable to write under security node"

How can I set the default home page in Firefox 4 for all users that login to a PC on a Win 7 PC?

I work at a community college in upstate NY.
We use Firefox as the default browser at our institution and we have always set the default homepage to be our homepage for all users that login to the PC. We had a procedure to to that that worked with Windows XP and FF 3 or earlier
We would do the following:
1. go to: c:\Documents and Settings\Administrator\Application Data\Mozilla\FireFox\Profiles\<profile_name>\prefs.js
2. Add the line: user_pref (“browser.startup.homepage”,”http://www.genesee.edu”);
3. Copy the Folder
C:\Documents & Settings\Administrator\Application Data\Mozilla
To
C:\Documents & Settings\Default User\Application Data\Mozilla
4. Restart the computer
We're going to Win 7 and Firefox 4 and things seem to be different in terms of files and file structure. Does anyone know how to accomplish this?
Thanks in advance.

Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

How to set a Default Value in the drop down on Account Creation ?

Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
              lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
              lv_current = lr_entity->create_related_entity(
                                              iv_relation_name = 'BuilRolesRel' ).
                             lv_current->set_property(
                                iv_attr_name = 'PARTNERROLE'
                                iv_value     = 'BUP002' ).
               CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
               cx_crm_genil_model_error.
               return.
        ENDTRY.
Thanks and Regards
Raman Khurana

Hi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Similar Messages

Maybe you are looking for