How to remove the parent-child software update point in sccm 2012 sp1
I have a CAS , Primary site server(1) and secondary site servers (7). I have software update point installed on CAS, Primary server and Secondary site servers as well.
I have a situation to reinstall the software update point which is in primary site server.
So, How to reinstall the software update point in primary site server since this is located in the middle between CAS and secondary site servers.
So, please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I have referred few posts on how to remove SUP
https://social.technet.microsoft.com/Forums/en-US/c7258aad-d968-427b-8826-4829916c14c9/remove-and-re-add-software-update-point-sccm-2012?forum=configmanagersdk
and how to install SUP
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates/
Hi,
>> please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I just tried to reinstall the SUP on the Primary site(only one SUP on Primary site and there is a SUP on Secondary site). The SUP upstream data source of the Secondary site showed empty and greyed out. But the upstream data source resumed after a while.
It seems nothing special needs to be done.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
HT1222 how I get the latest airport software update?
How i get the latest airport software update?
Marlon brown wrote:
I been trying to get this update off my phone but can not
I been trying to figure out what you're talking about but can not -
How to find who modified Software Update deployment in sccm 2012
Hi,
How to find who modified(Date & Time) software update deployment in SCCM 2012 ?In the Console :
Monitoring / System Status / Status Message Query
Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
You'll have your information there.
Benoit Lecours | Blog: System Center Dudes -
How to Get the Parent - Child Relationship
Hi ,
In my application having 100 tables with parent - child releation ship without using casecade constraints
i want to delete the parent with child and sub child records
Example
Table - 1
parent1
child 2
Table - 2
Child 1 - Parent 1
Parent 2
Table - 3
Child 1 - Parent 2
Parent 3
Table - 4
Child 1 - Parent 3
How to delete the parent table ? Is it any scripts available ?
Regards
Sudhakar P.Hi,
1) Firstly identify the parent tables using
SELECT a.table_name, 0
FROM user_tables a, user_tab_columns b
WHERE a.table_name = b.table_name
store these in one table say ID_table
2) Identify dependent tables and sore in table say table_dependency using
SELECT LEVEL, parenttable, parentcol, childtable, childcol
FROM (SELECT UNIQUE parenttable, parentcol, childtable,
b.column_name childcol
FROM (SELECT p.table_name parenttable,
k.column_name parentcol,
k.POSITION pos,
c.table_name childtable,
c.constraint_name CONSTRAINT
FROM all_constraints p,
all_constraints c,
all_cons_columns k
WHERE p.constraint_name =
c.r_constraint_name
AND c.r_constraint_name =
k.constraint_name
AND p.constraint_type IN ('P', 'U')
AND c.constraint_type = 'R'
AND p.table_name != c.table_name
ORDER BY p.table_name,
c.constraint_name,
k.POSITION) a,
all_cons_columns b
WHERE a.CONSTRAINT = b.constraint_name
AND a.pos = b.POSITION)
3)Now using these details find tables without cascade rule as below
SELECT *
FROM table_dependency
WHERE child_table IN (
SELECT DISTINCT table_name
FROM user_constraints
WHERE constraint_type = 'R'
AND delete_rule <> 'CASCADE'
AND table_name IN (SELECT child_table
FROM table_dependency)
AND r_constraint_name IN (
SELECT constraint_name
FROM user_constraints
WHERE table_name IN (
SELECT table_name
FROM id_table
UNION
SELECT child_table
FROM table_dependency))
AND table_name NOT IN (
SELECT table_name
FROM id_table)); -
Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
NickYes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
How to Custom Report using sql server report builder for SCCM 2012 SP1
Hi ,
I am new to database, if i want to create a manual report using sql server report builder for SCCM 2012 SP1, what step should i take.
i want to create a report in which computer name, total disk space, physical disk serial no come together. i already added class (physical disk serial no.) in hardware inventory classes. refer snapshotHi,
Here is a guide on how to create custom reports in Configuration Manager 2012, it is a great place to start, change to the data you want to display instead.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
HT4623 How long does the latest iPad software update take?
I started the latest software update on my iPad3 but I'm worried something is wrong. It's been going for about 45 minutes and it looks like it's stuck...
depends on your wifi connection but otherwise not too long.
-
Best Practice for Expired updates cleanup in SCCM 2012 SP1 R2
Hello,
I am looking for assistance in finding a best practice method for dealing with expired updates in SCCM SP1 R2. I have read a blog post: http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
I have been led to believe there may be a better method, or a more up to date best practice process in dealing with expired updates.
On one side I was hoping to keep a software update group intact, to have a history of what was deployed, but also wanting to keep things clean and avoid issues down the road as i used to in 2007 with expired updates.
Any assistance would be greatly appreciated!
Thanks,
SeanThe best idea is still to remove expired updates from software update groups. The process describes in that post is still how it works. That also means that if you don't remove the expired updates from your software update groups the expired updates will
still show...
To automatically remove the expired updates from a software update group, have a look at this script:
http://www.scconfigmgr.com/2014/11/18/remove-expired-and-superseded-updates-from-a-software-update-group-with-powershell/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Windows 8 & Server 2012 not reflecting in updates category in SCCM 2012 SP1 console
Hi,
We are using SCCM SP1 with CU4 on server 2012. I am not able to see the windows 8 and server 2012 in the updates category for patch management.
Any Idea?They should appear after the first successful sync.
Torsten Meringer | http://www.mssccmfaq.de -
SCCM 2012 SP1 - R2 Upgrade Incl Windows ADK for Windows 8.1 Update
Hi All
I Need some advice
We are preparing for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
Quick steps:
1 Uninstall ADK 8.0
2 Install ADK 8.1
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
But today I read the following article
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
How does this update fit in the upgrade process (add step 7 and install this update on the SCCM Server) , or is it better to leave this update because windows PE5.1 is not supported yet.
I hope someone can give me some good advice
regards and thx in advance
JohanHi All
So I can also use the ADK 8.1 Update with the installation , so my quick steps will be than for the upgrade SCCM 2012 SP1 -> SCCM 2012 R2
1 Uninstall ADK 8.0
2 Install the ADK 8.1 UPDATE
3 Upgrade SCCM 2012 SP1 -> SCCM 2012 R2
4 Install CU1 SCCM 2012 R2
5 Upgrade Clients to SCCM 2012 R2
6 Upgrade Clients to SCCM 2012 R2 CU1 with WSUS (SCUP)
Regards
Johan -
How can I delete old Apple Software Updates from 10.6 server?
Hi guys!!
First of all, please, excuse my english......i know it's the worst possible and will try to develop it.
My question is the following.
The hard disk of my xServe is almost full and I need to delete the old Apple Software Udates that it contains (some of them are from 2005!!)
And I don´t know how to make it!!
I`ve uncheck the "automatically enable copied updates" option in Server Admin and I´ve check-in the "Purge unused/legacy software", but i don´t know how to delete the oldest Apple Software Updates because I don´t know where the **** are they!!
Thank's in advance from Spain.
Any help will be very wellcome
J.You could try what
s in <http://discussions.apple.com/message.jspa?messageID=9289958#9289958>, or, as this is a new setup which isn't in use, you could just nuke the system and reinstall and this time use the correct DNS name. -
How to use GL Parent Child relationships in Discoverer?
Subject: How to used GL Parent Child relationships in Discoverer?
How to use GL Parent Child relationships in Discoverer?
Please let me know how to incorporate the parent -child relation ships exsiting in GL Accouting flexfield Segments in Discoverer for drill downs? we have GL - BIS views installed.
How to create the specific Parent -child relationship hierarchies in Discoverer from the FND_* tables?
Please help.
Thanks.
KS.Hi,
I'm also trying to implement this. If you have come any further in solving this any hints would be much appreciated...
regards,
AJ -
SCCM 2012: configure software update point
Hi,
I installed WSUS, installed the software update point on Windows 2012 (for SCCM 2012) with following commands:
Install-WindowsFeature -Name UpdateServices -IncludeManagementTools
cd 'C:\Program Files\Update Services\Tools\'
.\wsusutil.exe postinstall CONTENT_DIR=E:\WSUS
Add-CMSoftwareUpdatePoint -SiteCode "PRD" -SiteSystemServerName "CM01.contoso.com" -ClientConnectionType Intranet -WsusiisPort 8530 -WsusiissslPort 8531
Now I'm stuck. How do I configure the specific update (f.e. Windows 2012, forefront etc), download them to a certain folder?
Please advise.
J.
Jan HoedtIt really isn't practical (or possible) to try to do an entire ConfigMgr implementation using PowerShell. I don't believe that you can choose your products using PoSH.
You will find a full list of cmdlets here
http://technet.microsoft.com/en-us/library/jj821831(v=sc.20).aspx
The following cmdlets are available to configure your software update infrastructure but I'm pretty sure none of them will help you with this.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference? -
How to get the parent window in sub-child controller class in javafx?
how to get the parent window in sub-child controller class in javafx?
You can get the window in which a node is contained with
Window window = node.getScene().getWindow();Depending when this is invoked, you might want to check the Scene is not null before calling getWindow().
If the window is a stage that is owned by another window, you can get the "parent" or "owner" window with
Window owner = null ;
if (window instanceof Stage) {
Stage stage = (Stage) window ;
owner = stage.getOwner();
}
Maybe you are looking for
-
Dear SD consultants, I am working on depot sales scenario. I craeted SO, Delivery . While craeteing excise invoice i am using the invoices sent by mfg plant . Whils saveing it is not creating any excise invoice and giving message " RG23D updataed , d
-
Performance Point Services vs Reporting Services
I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the artic
-
My iOS5 update is forever "contacting the iPhone update server"??
-
Hi All- I'm hoping some of you Sun Kerberos gurus can tell me if my problem can be resolved... Basically I have my test Solaris 10 system set up to authenticate, via PAM, in 3 ways. First it checks if you have a local account and then let's you in if
-
ORA-12545:connect failed because target host or object not exist
Dear DBA's I am getting this error message when i want to connect oracle by using internet explorer browser. ORA-12545:connect failed because target host or object not exist I already started services: oracleservicesSID,OracleOraDb10g_home1TSNListene