How to remove the question mark from the dock

How do I remove the question mark from the dock. Nothing I tried works.

What have you tried?
What happens when you click on it? Does a menu appear?
Would you provide a screen shot (SHIFT COMMAND 4).
Ciao.

Similar Messages

How do I remove the question mark on my dock? When I move my cursor over it it reads "photos".

How do I remove the question mark on my dock?
When I move my cursor over it it reads "photos".

Everything in the Dock is an alias.... that is a tiny file that points to the original app, folder or file.
If the original app, folder or file is missing or not accessible in some other way (deleted?), it displays a question mark.
You remove it the same way you remove any icon from the Dock.
Simply drag the icon up away from the doc a couple of inches and let go of it.
It should just disappear with a poof and some clouds.

How to remove my credit card from the App Store

How to remove my credit card from the App Store

I used a pre-loaded credit card so when it ran out i had problems, primarily because it wont let me download or update anything until the "billing problem with the last transaction" was resolved. I dont really care if the purchase goes through but i want to be able to update stuff again and it wont give me the option to select 'none' under payment type. do i have to put another card on there just so i can "resolve the billing problem" and then i have to take it off again or is there a way around this or is it a never ending cycle?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Any ideas on how to remove a small scratch from the screen or whether it is covered by apple?

Call Apple Care and ask them if your computer is still under warranty.

Where is the question mark on the 8600 screen display

Trying to reset password for wireless and can't find the question mark on the printer keypad. It says it is on the 123 screen but can't find.

Thank you but still unable to locate. Went to 123? Screen on printer but 3rd row 3rd is a period. The screen is so faint but still ? Does not show up

How to get rid of the question mark on the HP photosmart 7525screen?

I was printing from the HP Paviliondm4 computer to the Photosmart 7525 printer and that page on the computer screen just kept reprinting together with another printing job that I had. It was hard to get rid of it, but eventually it disappeared, the doubling of printing. The problem now is that "question mark" on the printer screen appears, that the "home symbol" on the printer screen has disappeared and can't get it back, as it was the normal screen when I first used the printer. What's the problem that I can't get that "question mark" off?

Hello @Lester7525,
Welcome to the HP Forums!
I understand you only have the question mark on your Photosmart 7525 and cannot get back the home screen back. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
Try performing a hard reset on your printer for more than 60 seconds. Leave the printer turned on> Disconnect the power cord from the back of the printer.
Also, you can try updating the firmware to see if this helps. I will provide the HP Website where you can download this here. (It may not work since this printer is in a different menu.) Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

HT3702 How to remove my credit card from the iPod

I want to remove my credit card from the app store

On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
If "None" is not an option, you may want to contact iTunes support:
http://www.apple.com/support/itunes/contact/

How to remove a static class from the Runtime of the JVM

I want to remove a static class from the Runtime of the JVM.
My goal is to clear the cache of the "InetAddress.getByName(String host)" static method.
Thanks in advance.
Floweb

Sorry, It means a class that has been loaded in the JVM by the call to a static method......
Floweb

How to remove a Java instance from the config tools

Hi,
I would like to remove a java instance from the config tool since that server does not exist anymore. Is there a way?
Please le me know.
Thanks
Jean

Jean,
I think you can do this if you remove the entries of your Instance from instance.properties file located under the below path.Take a backup of the file first then do the changes and Restart the server once done.
/usr/sap/SID/JCInstanceno/j2ee/cluster/instance.properties
Hope this helps.

Can t find the question mark on the keyboard

hi
I ve just installed tiger 2 days ago and I can t type the question mark any more.. it gives me either this ^ (with shift) or § (with alt)..
any ideas..

gallinette:
Boot from the Tiger install disk.
Go to Utilities menu.
Launch Disk Utility.
Select your HDD (manufacturer ID) in sidebar.
Select First Aid tab in main panel.
Click or Repair disk button.
If DU reports disk needs no repairs, quit DU.
If DU reports errors, click Repair again and again until DU reports disk repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
In this case, because of your keys being out of order, I believe Disk Warrior will do a better job.
While booted from internal HDD go to Home > Applications > Utilities > Disk Utility.
Launch Disk Utility.
Select your HDD (manufacturer ID) in sidebar.
Select First Aid tab in main panel.
Click or Repair Disk Permissiions button.
Quit DU.
Please don't hesitate to post back with further questions or comments, or to report on how procedure worked for you.
Good luck.
cornelius
Message was edited by: cornelius

After reinstalling mountain lion i got the question mark on the screen

hi everyone,
after reinstalling mac os x 10.8 from internet recovery, mac restarts itself which is normal.
but when it starts there is a question mark on a folder symbol on the gray screen.
what should i do?

The question mark appears when your computer can't find any bootable volume to start. This can be because of two reasons:
1. Your computer has forgotten the startup device.
2. The hard drive is damaged.
First of all, turn off your computer and turn it on again holding the Option (Alt) key, so you will see all the bootable volumes on the display. Choose the OS X volume and set up OS X as normal. Finally, open System Preferences > Startup Disk, and choose your OS X volume

Why is there a little blue square box with the question mark in the middle of the place where my pictures are suppose to be??

I don't know why sometimes my pictures show up, and other times I get the little blue square with the question mark. Mostly it does that in gmail.
Can someone tell me what setting I need to use? I already reset Safari. Couldn't figure out what else to do.

Do you get a dialog box if you control click the missing image.

How to remove a Sharepoint list from the Powerpoint app on iPads??

Hello,
I have added a Sharepoint "place" in Powerpoint app on an iPad and cannot find a way to remove it, the address of the SharePoint page/place/list has been changed so it is no longer relevant to me. Any tips?

Hello Scott,
I did post a question but for some reason it didn't post. What I typed was removed for some reason. So I'm trying again. I'll keep trying until it posts. I had installed a 3rd party sound editor program which added a sound device to the list with Mic and line in. It's also in the output list. All I need to do is remove the device and then AU will allow me to select line in as an input device. Right now AU is confused by the extra device and wont let me select an input device. AU is a developer app. But that's not the problem. The problem is removing the device from the list of sound devices.
If someone knows where this device might be and how to remove it, please let me know.
Thanks,
Dave

How to Remove Jar File name from the screen of nokia 40 series

hi
i have the problem with running midlet.
the jar file jame is always visible on the screen, how to remove that ?

>
Prasanna Kumar wrote:
> Hi ALL
>
> I am using file adapter and I what to create file name dynamically by acesssing PO number and time stamp from the payload using variable substution.
> But the problem is I am getting ":" in time stamp field value and it is not acceptable for file name .
> So could you please tell me a way that I can remove this ":" from that particular field value and create the file name dynamically.
>
> Note 1)Add Time stamp option will not help me as we require a time stamp of particular zone.
> 2) Dynamic Configuration code is also not use full as I am using 1:n file creation
does the time stamp with the ":" a part of your output file?
else use a replaceAll function in your mapping and replace the : with empty string then use the value in the variable substitution
Another option is use the normal BPM for 1: N message flow. The use a simple java mapping that will introduce a dynamic configuration and you can create the file name as you want. the java mapping will be used in the flow of messages from BPM to target system.
ref: /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

How to Remove ZD7000 Antenna Wires from the Hole?

UPDATE: The Maintenance and Service Guide mentions that the antenna wires are attached to a card; that's why I cannot simply pull them out through the hole. There may be enough slack so that, for my purposes, I won't have to disconnect the wires.
I'm finding some issues with the step-by-step instructions that I referenced below.
BB
Hi,
I'm disassembling my ZD7000 laptop to replace the DC power jack. I started following the steps at http://www.ifixit.com/Guide/Repairing+HP+Pavilion+ZD7000+Motherboard/2878/1.
Everything went well until I got to Step 14, where I'm instructed to "Disconnect the 2 wires connecting the monitor to the rest of the laptop." In the picture, the antenna wire is one of the two wires highlighted with a red box. (Although the picture is somewhat confusing, because it shows a hand touching a third wire that is not highlighted.)
The HP Service & Maintenance Manual says, "Remove the 2 antenna cables from the hole and routing channel in the top cover." Since they are antenna wires, I assumed I could simply pull them out through the hole. However, I gave up after exerting as much pull pressure as I dared, which was a lot.
Am I missing something? I suppose I could cut the antenna wires and resolder them during reassembly.
Any suggestions would be greatly appreciated.
Thanks,
Bill
This question was solved.
View Solution.

As indicated in my update, this issue has been solved

How to remove the question mark from the dock

Similar Messages

Maybe you are looking for