How to remove the two black sidebars

Hello
I am putting together a slideshow in Elements 11 and I am just at the stage where I have imported the photos to the Timeline. The photos are all 720px (wide) x 576px (high) and have the same resolution. Each image on the Timeline has a Pixel Aspect ratio of 1.0940.
In my Presets, I have configured this project as a PAL DV widescreen project, and I have turned off the Default Scale to Frame Size option in Edit Menu/Preferences/General.
The problem I have is that black sidebars appear down each left and right side of every photo - please see screenshot. How would I eliminate those sidebars, please?
Thanks!
Steve

Hello ATR
Thanks again for getting back to me.
I got the Pixel Aspect ratio of 1.0940 by right-clicking on a jpg on the Timeline and selecting 'Show Properties' at the bottom of the drop-down menu.
OK, I abandoned the above project and gave my new widescreen project the same Preset values (please see screenshot)
except that this time I turned on the Default Scale to Frame Size option in Edit Menu/Preferences/General. Then I imported my images (the same 720 x 576px images) onto the Timeline. The two black sidebars still appeared down the left and right-hand sides.
So, I abandoned that project.
Now I have opened up a new project, PAL DV Standard (screenshot):
I have also turn on the Default Scale to Frame Size option in Edit Menu/Preferences/General. I have imported the images to the Timeline and this time - hooray! - the image fits in the monitor/editor with no black sidebars. (This is what I wanted to achieve with widescreen.)
What I now need to do is allocate a time, let's say 5 seconds, for when each image is visible onscreen plus add a transition, probably a 1-second 'Cross Dissolve' between each image. In order to allocate that time of 5 seconds for the appearance of each image, how do I determine that amount of time (keyframes?) and, after doing so, would you then select Transitions | Dissolve | Cross Dissolve and add the transition that way?
Thanks again!
Steve

Similar Messages

How to remove the sidebar folders

i would like to know how to remove the sidebar folder under the places section. reason being i have a folder that i previously place it on the sidebar but now i cant click that folder anymore. therefore i want to remove it.

Navigate to Users/username/Library/Preferences and find the file named, "com.apple.sidebarlists.plist" and move it to the trash. Empty the trash. Then restart you computer and the sidebar menu will be cleared of all added aliases. You will have to create them again.
If this doesn't work, launch the Terminal.app in the Applications/Utilities folder.
In the terminal type: (or copy and paste this command) "cd /Library/Preferences" (without the quotation marks) after the promt line and hit return. This will bring you to the directory with the "com.apple.sidebarlists.plist" file.
Then type: "rm com.apple.sidebarlists.plist" (without the quotation marks). This will remove that file.
Then restart you computer and the sidebar menu will be cleared of all added aliases. You will have to create them again.

I have just donwloaded Firefox 5 to my Sony Vaio laptop and it keeps opening three tabs, I uninstalled it and reinstalled it and it happened agona, how do I remove the two surplus tabs?

I have just donwloaded Firefox 5 to my Sony Vaio laptop and it keeps opening three tabs, I uninstalled it and reinstalled it and it happened again, how do I remove the two surplus tabs?

I finally managed to fix this problem! You have to go into your program files and you will see another bearshare folder, this has two add on components for firefox. Go into the folders, and find the uninstall program tools.
One of them will uninstall here. There is a program called media mrg or something along those lines in your add ons for firefox. You need to delete this, and it should stop bearshare popping up in the tabs. Then just to make sure, I went back and deleted the bearshare folder. You know you have disabled all the right components when it will finally let you delete the folder.

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to remove the Option "Only Refer Excise Invoice "from MIGO

Hello,
We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
1)Only Cature Excise Invoice
2)Only Refer excise Invoice
3)Only Part1
4)No excise Entry
As per my client requirement then only need two options in MIGO.
1)Only Part1
2)No excise Entry
Bcz they want to Capture and Post excise Invoice in J1IEX only...
I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
Regards
sapman

Hi,
You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

How to remove the rule or class function in CS5

i need to know how to remove the rule or class function in CS5 at the bottom of the screen there are two options for formating HTML and Css when i click the HTML it only allows me to change the bold or italics or link something but when i click CSS it allows me to format how i want the paragraph aligned and the text size and font when i click on lets say changing the font size a box comes up asking me to name a rule so it applies it to everything else i type i want to know how to stop tht like edit everything on my own and if i use CS5 here will it be compatible with CS4 or CS3 at my skool plzz help ive been frustrated with this

If I use CS5 here will it be compatible with CS4 or CS3 at my skool plzz help ive been frustrated with this
Code is code. It doesn't matter which product you use.
i need to know how to remove the rule or class function in CS5
You can't. DW encourages you to use good coding methods, which means using CSS classes and to keep content (HTML) separate from styles (CSS). For example, if you change font-size on p tags like so:
p {font-size: 38px}
Every paragraph will have 38px sized text.
If you want to apply a special style to just a portion of your text, you must define a CSS class name like so:
.foo {
font-size: 38px;
color: red;
HTML:
<p>This is normal paragraph text <span class="foo"> And this is very big and red.</span></p>
This is normal paragraph text And this is very big and red.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Message was edited by: Nancy O. -- unfortunately, this forum doesn't support Raw HTML with inline styles. You'll need to paste my code examples into your DW page to see the effect.

How to remove the Page Item in thin Bean JSP

Hi, I'm wondering how to remove the Page Item in JSP developed by BIBeans, since I have tried to remove the Presentation's Page Item in BiBeans Catalog, but with no result in JSP. Thank you!
Jeff

There are two ways to do this:
1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
<orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

How to remove the mandatory field setting in output control

Hi everybody,
While printing a Payment Voucher through F-58 and FBZ5(reprint), there are two output devices, the first one is - printer for forms and second is - payment advice printer.
In our case we have configured the cheque printing and payment voucher printing seperately. The cheque goes to first printer(kept mandatory field) and the payment voucher goes to second printer. One of our plant does not print the cheque from SAP, they only print the payment voucher because the cheque is manually prepared. How do I avoid the cheque printing. Is there any way out to print only the payment voucher through F-58 and FBZ5
Please guide me how to tackle it or how to remove the mandatory field setting in the output control screen?
Regards
Paul

Hi
As of my understanding, there is no relation ship between the Sales Organization and this mandatory partner function.
Here are few suggestions.
1. Since Partner functions are defualted and made mandatory in the Partner Determination Procedure so you have to remove this Mandatory option for PE from the Partner Determination Procedure that is AG if using standard one.
2. If you are using a single partner function than , Copy and create a New partner procedure and a new account group . Where in one you can default PE as mandatory and in another one you make a optional where it can be choosen manually while creating the customer.
Follow the path to check for entries :
SPRO > sales & distribution > Basic Function > Partner Determination > set up partner determination > select for customer master > select the partner procedure you are using AG as standard > then partner function in procedure > here maintian the check as required like, Mandatory or No check for Non Mandatory .
Thanks
RB

Satellite Pro 4260: How to remove the DVD drive?

I have a Satellite Pro 4260 and it appears that the DVD drive is broken and I want to replace it. I cannot figure out how to remove the old one.
Does anyone know how? Is there a manual available showing how?
Thanks

Hi
This notebook is not know to me but a checked some sites in the net and it seems that the top cover must be removed.
Then lift up the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD board from PJ15 on the system board.
Remove two screws securing the CD-ROM/DVD-ROM connector board.
Separate the CD-ROM/DVD-ROM connector board and CD-ROM/DVD-ROM connector brace from the CD-ROM/DVD-ROM drive
Well, I think its not easy for someone with no experience.
Therefore if you dont know how to do it and you have no much experience you should ask someone how knows what to do ;)

How to remove the duplicate HR record from per_all_people_f table

Because of some mistake user has created two records for one employee one with start date 4th may 2010 and end date with 1st may 2011 and another with start date with 2nd may 2011 and end date is 31st of dec 2012.
When I go to enter and maintain employee i found the record which starts with 4th may 2010 and end date with 1st may 2011.
Please let me know how to remove the end date from this record.
when I ran the query
select * from PER_ALL_PEOPLE_F PAPF where upper(first_name)='UDAYA';
i have first four column for this type.I want to remove the first row from here
41246 02-MAY-11 31-DEC-12 81 1125
41246 04-MAY-10 01-MAY-11 81 1125
Please help.
Regards,
Prakash

Okay, so you wish to just have one person record from the 4th May 2010 through to the 31st December 4712, right?
In that case, do this:
1) Query the person in the Enter & Maintain person form
2) Hit Delete on the toolbar
3) Select "Delete Next Change" from the date-track mode and save
4) Re-query
Now the date-track update from 2nd May is gone.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to remove the the standard button APPEND/INSERT/DELETE in webdynpro alv

Hello,
how to remove the the standard button APPEND/INSERT/DELETE in webdynpro-abap alv
Thanks
Rakshar

Use this.
    data lo_cmp_usage type ref to if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_alv1( ).
    if lo_cmp_usage->has_active_component( ) is initial.
      lo_cmp_usage->create_component( ).
    endif.
    data lo_interfacecontroller type ref to iwci_salv_wd_table .
    lo_interfacecontroller =   wd_this->wd_cpifc_alv1( ).
    data lo_value type ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(
    data: lr_std type ref to if_salv_wd_std_functions.
    lr_std ?= lo_value.
    lr_std->set_export_allowed( abap_false ).
NOte: ALV1 is alv component name
Regards
Srinivas
Edited by: sanasrinivas on Dec 1, 2011 6:11 AM

How to remove the sort function on the drill down and then save

how to remove the sort function on the drill down and then save in the change local view of the Query
Is it possible to change the porperties of any characteristic in the local view and then save?
If so please post the answer.

I do not think that option is possible.
Regards,
Venkata Boga.

How to remove the white space that is now above the main images on each page?

http://www.nydogworks.net
Hello,
I took over updating some things on my site from my web designer. The main images on each page used to be flush with the navigation bar on each page. Now there is a white space in between each one. Can you tell me how to remove the white space?
<div id="container">
<div id="imgholder"><img src="images/feature-aboutus.jpg" width="951" height="341" alt="" />
</div>
<div id="pageContentNoside">
   <div id="sideSub">
     <form action="form.php" method="post" name="form2" id="form2"> <table width="250" border="0" cellpadding="2" cellspacing="2">
       <tr>
         <td width="273"><h2>Quick Contact</h2></td>
         </tr>
       <tr>
         <td class="mainContent">Your Name</td>
         </tr>
       <tr>
         <td><span class="style9">
           <input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Your Email Address* (required)</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
           </span></td>
         </tr>
       <tr>
         <td class="mainContent">Phone Number</td>
         </tr>
       <tr>
         <td><span class="style7 style9">
           <input name="phone" type="text" class="colorfieldssmall" id="phone" />
           </span></td>
         </tr>
       <tr>
         <td><span class="mainContent">Type of Dog Training</span></td>
         </tr>
       <tr>
         <td class="mainContent"><span class="style9">
           <select name="need" class="colorfieldssmall" id="need">
             <option value="select one">select one</option>
             <option value="Basic Obedience">Basic Obedience</option>
             <option value="Behavior Therapy">Behavior Therapy</option>
             <option value="Board and Train">Board and Train</option>
             <option value="Off Leash Training">Off Leash Training</option>
             <option value="Puppy Training">Puppy Training</option>
             </select>
           </span></td>
         </tr>
       <tr>
         <td> </td>
         </tr>
       <tr>
         <td><div align="left">
           <input type="submit" name="submit" id="submit" value="Submit" />
           </div>
           </td>
         </tr>
       </table></form>
     <h2><br />
       Dog Training Services<br />
       </h2>
     <ul id="subnav">
       <li><a href="basic-obedience.html">Basic Obedience</a></li>
       <li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
       <li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
       <li><a href="off-leash-training.html">Off Leash Training</a></li>
       <li><a href="puppy-training-program.html">Puppy Training</a></li>
       </ul>
     <br />
     <br />
     <br />
     </div>
<div id="suggestPost"><a href="https://www.facebook.com/pages/NYDogWorks/219268038151244?fref=ts" ></a></div>
   <div id="mainContent">
     <h1 class="copyrightType">About NY DogWorks</h1><br />
     <h2> <span class="testimonal">The Owner of NYDogWorks</span>      </h2>
     <p><span class="copyrightType"><img src="images/dogpic.jpg" alt="Dog Behavior Therapy" width="183" height="275" class="h_img_float_right" /></span><strong>NYDogWorks L.L.C. is owned and operated by Master Certified Dog Trainer and Behavior Specialist Brian DeMartino. </strong><br />
       <br />
       His training is hands down the best out there. He has become one of the most sought after dog trainers throughout Long Island, Manhattan, & New York.<br />
       <br />
       With over 15 years experience training and rehabilitating some of the toughest cases of dog behaviors. He’s Mastered the Art of teaching top knotch obedience and manners with outstanding results and has developed the most full proof and guaranteed system to fully housebreak any puppy or dog in the shortest amount of time.<br />
       <br />
       He is Certified in dog training and dog behavior and is an Official Evaluator for the American Kennel Club’s (C.G.C) Program.<br />
       <br />
       <br />
       <strong>All About NYDogWorks</strong><br />
       </p>
<p><br />
</p>
     <p>NYDogWorks Dog Education, is a Professional Dog Training Company offering dog training for puppies and older dogs through customized in-home training programs by Master Certified Trainers in Nassau County, Suffolk County, Hamptons, Long Island, Manhattan, Brooklyn, Bronx, Queens, Rockland County, Westchester County, Orange County, and Bergen County New Jersey. NYDogWorks offers obedience training, Housebreaking, Manners, socialization for your dog, Puppy Training and Education, Behavior Therapy, Trick Training, Agility, Complete Off Leash Training, Sport Work, and Personal Protection Training. <br />
       <br />
       <strong><br />
         NYDogWorks Boarding & Training Programs</strong><br />
       </p>
<p><br />
    We offer boarding and training programs done in the home of owner, Brian DeMartino. This is a customized 2-6 week program to suit your dog's needs, great for someone who feels they do not have the time or patience to train or rehabilitate their dog at their home. This is a 100% guaranteed program. Your dog will stay with us for no additional charge if we feel that he or she has not learned all that was agreed upon. We guarantee that if there is any regression within 3 months of your dog being back home with you, he/she will come back to us for no additional charge.<br />
    <br />
    <a href="board-and-train-dog-program.html">View Boarding & Training Programs</a></p>
     <p><br />
       </p>
     <p><br />
       <br />
</div>
   <div id="breadCrumbs">
     <p><a href="index.html">Home</a> > NY DogWorks - About Certified Dog Trainer Brian DeMartino<br />
       <strong>Serving all of Long Island, Nassau & Suffolk County, Manhattan, Brooklyn & Queens</strong></p>
     </div>
</div>
    <div id="footer">
      <div id="footermenu">
      <div id="footermenu1">
      </div>
    </div>
   <div class="phoneNumber" id="copyright"> Copyright © 2014 NY DogWorks</div>
     <div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a>     </div>
</div>
</div>

You should be able to add the following snippets of css to your stylesheet to fix that.
In the mainstyle.css file, change...
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
to
#imgholder {
width: 950px;
margin-top: 0px;
padding: 0px;
margin-right: auto;
margin-left: auto;
overflow:hidden;

How to remove the two black sidebars

Similar Messages

Maybe you are looking for