How to remove the warning messages in CODE INSPECTOR of my report......?

Hi All,
I am trying to do the check to my program i.e CODE INSPECTOR. i am seeing the following warning messages below.
1 warning message
Program zraj0xxx include zraj0xxx row 000083 Column0000
%LINR-VBUP contains a hyphen
(The Hyphen is used as a dereferencing operator! )
Note: when i double click on the above message its taking me to the below code of my program.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
2 warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
Note: when i double click on the above message its taking me to the below code of my program.
SELECTION-SCREEN: BEGIN OF BLOCK PROG
                           WITH FRAME TITLE TEXT-F58.
TABLES: VLPMA,
              VLKPA.
TABLES VBUP.
3 warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
Note: when i double click on the above message its taking me to the below code of my program.
REPORT ZHYD0147 LINE-SIZE 255 NO STANDARD PAGE HEADING
   MESSAGE-ID ZB
   LINE-COUNT 065(001).
Thanks in advance.
Rajesh.

Hi Rajesh,
First warning message.
DATA %COUNT-VBUP(4) TYPE X.
DATA %LINR-VBUP(2).
TABLES VBPA.
DATA %COUNT-VBPA(4) TYPE X.
DATA %LINR-VBPA(2).
Here you are not supposed to use hyphen but instead use '_'.
Second warning message
Program zraj0xxx include zraj0xxx row 000079 Column0000
Field string VLPMA is not referenced statically in the program
That means you are not using this VLPMA any where in your program so bettr delete fromt he Top Include.
Note: when i double click on the above message its taking me to the below code of my program.
Third warning message
Program zraj0xxx include zraj0xxx row 000001 Column0000
TEXT- GOH from the text pool is not used.
this also means that you are not using this Text elemnt anywhere of your program.So delete this one also.
Thanks
Rohini.

Similar Messages

How to remove browser warning message in HTML 5 Cap 8 projects?

How to remove browser warning message in HTML 5 Cap 8 projects?

My conclusion after a morning struggling with this, is that there's no point in suppressing the message if your html5 content then goes on to misbehave in Firefox (like mine does). I've chosen to keep the popup, but change the wording to refer Firefox users to a completely separate Flash version. The wording of the popup is also in CPM.js.
Before you all shout at me, no I can't use the multiscreen.html approach, because my Flash version will have to be non-rescaleable, because web objects don't rescale in Flash.

How to Convert the Warning Message to Error Message in Standard Transaction

Hi,
I face one problem in Standard Transaction Code CS02. In that by entering the material Number, Plant, bomstatus press enter. it gives a warning message. How to convert the Warning message to Error. In abap how to do that. Please help me.

Mohan,
It appears that there is some configuration you can do for BOM Message types to change the message type. The IMG link for this function is:
Production->Basic Data->Bill of Material->General Data->Change Message Type
However you need to read the IMG documentation to see if this will work for you. There are only certain messages that can be changed with this configuration step.
Also, please do not double post questions in the forums.
Best Regards,
Chris H.

How to clear the Warning Messages

Hi Friends,
How to clear the warning messages, The requirement is I am preparing some warning messages in page1 , and based on some button user will be navigated to page2. In page2 If user clicks on Save button I am displaying the warning messages which are preared in first page(Code snippet shown below) when user trying to navigate to first page .
addWarningMessage("",new Object[]{});
Thanks in Advance

Hi Frank,
Yes you are right, The warning message is being displayed on Page2 when user clicked on 'Save' button on Page2. The Code snippet is being executed in ServiceImpl class when user clicks on the Save button.
Basically, I am validating the Page1 data and Page2 data on Page2 when User clicks on the Save button on page2.
Thank you !!

How to remove the statusbar message in panelCollecion ?

Hi All,
JDev ver 11.1.1.3.0
How to remove the statusbar message in panelCollecion ?
I am getting 'Columns hidden' in the status bar.. i want to remove that ?
give suggestion..
Regards
Gops

so ...
Gops wrote:
JDev ver 11.1.1.3.0
Jan Vervecken wrote:about ...
Navaneetha Krishnan Nataraj wrote:
For the PanelCollection, add statusBar to FeaturesOff attribute.fyi, the "featuresOff " attribute is documented
at http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
regards
Jan- "Oracle Fusion Middleware Tag Reference for Oracle ADF Faces 11g R1 PS3 (11.1.1) E12419-05 "
at http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/toc.htm
refers to http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
documenting the "featuresOff " attribute with valid value "statusBar "
- "Oracle Fusion Middleware Tag Reference for Oracle ADF Faces 11g Release 1 (11.1.1) E12419-04 "
at http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/toc.htm
refers to http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e12419/tagdoc/af_panelCollection.html
documenting the "featuresOff " attribute not with valid value "statusBar "
regards
Jan

How to remove browser warning message in HTML 5 Cap 6 projects?

Hello,
Is there any way to remove the following pop-up message from published HTML 5 Captivate 6 projects?
Adobe Captivate
This browser does not support some of the content in the file you are trying to view. Use one of the following browsers:
Internet Explorer 9 or later
Safari 5.1 or later
Google Chrome 17 or later
Our Blackboard 9.1 tech analysts recommend that all students use Firefox, and I'd rather that they don't have to read the above warning message every time they open a module. (The module did work as expected, even in Firefox.)
Thank you,
JAB

Changing .ini is the advice eventually given in the Phonegap forum. (Browser compatibility error in Captivate conversions).
But there's a much simpler solution offered at the bottom of this page - just a few lines of code at the end of
function initializeCP() { in the index.html file header.
A More Mobile-Friendly Captivate HTML Template | Float Mobile Learning
Even better, that blog post also shows how to remove the play button for autoplay and make touch response times faster (for mobiles) - refer to blog for how.
var _onComplete = cp.complete;
cp.complete = function() {
    _onComplete();
    $("#CPUnSupportedBrowserWarning_ID").remove(); // Removes browser warning
    setTimeout(function() {
        cp.movie.play(); // Skips the play button
    }, 1);

How to remove the warning "do you want to save changes to investigation.pdf before closing"

Issue: To remove the warning "do you want to save changes to investigation.pdf before closing"
I have created a XFA pdf file(using LC Designer 8.2) to display this issue
I am not able to attached the PDF. Without attaching the pdf it would be difficult to explain.
click event js:
function activateUser() {
var PDFVersion=xfa.host.variation+xfa.host.version;
xfa.host.messageBox("button click event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "invisible";
xfa.form.form1.sendForm.successMsg.presence = "visible";
event.target.dirty=false;
docReady event js:
function displayInfo(){
var res =xfa.host.variation;//Added this line to display the successMsg
//xfa.host.messageBox("docReady event registered");
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
docClose event js:
xfa.host.messageBox("docClose event registered");
event.target.dirty=false;
Steps to get the warning:
1) Open the attached pdf using Acrobat Professional.
2) Click the Confirm Enrollment" button
3) Now close the document & the acrobat gives a warning "do you want to save changes to investigation.pdf before closing"
Summary of the XFA pdf:
It has two text fileds. On docReady event field A is made visisble & field B is made invisible.
On button click event the field A is made invisisble & field B is made visible.
On closing the pdf it should not throw this warning message.
My Efforts:
1) Found a property in adobe js docs.
       event.target.dirty=false;
It doesn't solve the problem.
2) I tried to put this logic in almost all the events listed in designer but I am not able to resolve the issue.
Please help me resolve this issue.

I tried putting the below 2 lines of code at the end of button click event & docClose event.
      event.target.dirty=false;
      event.target.requiresFullSave=false;
It still gives the warning.
Also I tried to found out the line of code which is making the pdf dirty.
xfa.host.messageBox("is doc dirty (before displayInfo's visible-invisible work): " + event.target.dirty);
xfa.form.form1.sendForm.welcomeMsg.presence = "visible";
xfa.form.form1.sendForm.successMsg.presence = "invisible";
xfa.host.messageBox("is doc dirty (after displayInfo's visible-invisible work): " + event.target.dirty);
The doc got dirty when the successMsg field is made invisible.
Problem I am trying to solve is:
     To display a welcome message before user action and after user action wants to display a success message.
     I follwed the visible & invisible approach & it wokred but gives me a warning on doc close.(Highly imp to avoid it)
Is there any other approach I could follow here.

How to remove the '#'symbols for infoobject movement types in bex reporting

Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.

Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK.

How to suppress the Warning messages while doing GR(MIGO)

Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venky

Hi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D

How to remove the default message in PDF generated through JRC?

Hi all,
I am in need of removing the default and automatic message(Register free at .... to remove this message) at the pdf footer has been generated while exporting a report through a java Program using JRC.
By how it is generated and how to customize the pdf?
Can anyone help me.
Thanks in advance,
Saravanakumar.

It doesn't work for me neither.
Tried many ways.
I followed the full instructions putting the jar in eclipse/plugins folder, restart eclipse.
Right click on the project, chose crystal report -> update keycode.
I edited the CRConfig.xml adding keycode tag with the value I copied from the jar.
None of above works.
Is there other ways to remove that line of message from the report?
thank you in advance.
Sean

How to Remove the /Div in a Multi-line Field when reporting in Excel, getting

I am uisng Excel Services to extract data from PS2013. And the Multi-line text fields include the </Div> syntax. I have looked at a lot of the links regarding how to do this. I have even borrowed code that was on someones blog.
When I try and use it I get the following message and cannot not seem to resolve it after reading varous links regarding this issue.
Any ideas? As a work around I have created an Excel Macro to remove it, however would like to solve it in the query
Error Message
The data types
Nvarchar and Ntext are incompatible in the add operator
Here is the syntax
declare @Headxml nvarchar(350)
declare @Footxml nvarchar(50)
set @Headxml = N'<?xml version="1.0"?>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd"
[<!ENTITY nbsp " "><!ENTITY quot """>]><html><body>'
set @Footxml = N'</body></html>'
SELECT   ProjectOwner.ProjectUID as [ProjectUID],
ProjectOwner.ProjectName as [Project Name],
ProjectOwner.[Project Number] as [ECP#],
TaskRelated.TaskName as [Task Name],
MSP_WssRiskToTaskLinks_UserView.RiskID as [Risk ID],
MSP_WssRiskToTaskLinks_UserView.Title as [Risk Title],
MSP_WssRiskToTaskLinks_UserView.Status as [Status],
MSP_WssRiskToTaskLinks_UserView.AssignedToResource as [Assigned To],
MSP_WssRiskToTaskLinks_UserView.Owner as [PM],
MSP_WssRiskToTaskLinks_UserView.DueDate as [Due Date],
MSP_WssRiskToTaskLinks_UserView.Probability as [Probability],
MSP_WssRiskToTaskLinks_UserView.Impact as [Impact],
MSP_WssRiskToTaskLinks_UserView.Exposure as [Exposure],
MSP_WssRiskToTaskLinks_UserView.Cost as [Cost],
MSP_WssRiskToTaskLinks_UserView.CostExposure as [Cost Exposure],
MSP_WssRiskToTaskLinks_UserView.Category as [Category],
ISNULL(LTRIM((CONVERT(xml,(@Headxml+MSP_WssRiskToTaskLinks_UserView.[Description]+@Footxml),3)
        .value(N'(/)','nvarchar(4000)'))),'') AS [YourMulti-lineCustomFieldNewName],
MSP_WssRiskToTaskLinks_UserView.MitigationPlan as [Mitigation Plan],
MSP_WssRiskToTaskLinks_UserView.ContingencyPlan as [Contingency Plan],
MSP_WssRiskToTaskLinks_UserView.TriggerTask as [Trigger Task],
MSP_WssRiskToTaskLinks_UserView.TriggerDescription as [Trigger Description],
MSP_WssRiskToTaskLinks_UserView.CreatedDate as [Created Date],
MSP_WssRiskToTaskLinks_UserView.CreateByResource as [Create By],
MSP_WssRiskToTaskLinks_UserView.ModifiedByResource as [Modified By],
MSP_WssRiskToTaskLinks_UserView.ModifiedDate as [Modified],
TaskRelated.TaskUID as [TaskUID],
TaskRelated.TaskName as [Task Name],
TaskRelated.TaskStartDate as [Task Start],
TaskRelated.TaskFinishDate as [Task Finish] FROM dbo.MSP_WssRiskToTaskLinks_UserView
LEFT OUTER JOIN dbo.MSP_EpmProject_UserView AS ProjectOwner ON ProjectOwner.ProjectUID = MSP_WssRiskToTaskLinks_UserView.ProjectUID
LEFT OUTER JOIN dbo.MSP_EpmProject_UserView AS ProjectRelated ON ProjectRelated.ProjectUID = MSP_WssRiskToTaskLinks_UserView.RelatedProjectUID
LEFT OUTER JOIN dbo.MSP_EpmTask_UserView AS TaskRelated ON TaskRelated.ProjectUID = MSP_WssRiskToTaskLinks_UserView.RelatedProjectUID
AND TaskRelated.TaskUID = MSP_WssRiskToTaskLinks_UserView.RelatedTaskUID LEFT JOIN dbo.MSP_WssRelationshipType ON
MSP_WssRiskToTaskLinks_UserView.RelationshipTypeID = MSP_WssRelationshipType.RelationshipTypeID
ORDER BY ProjectOwner.ProjectName ASC, MSP_WssRiskToTaskLinks_UserView.RiskID
Andrew Payze

Hi Andrew,
We normally create a function to do this. Some examples can be found here:
http://blog.sqlauthority.com/2007/06/16/sql-server-udf-user-defined-function-to-strip-html-parse-html-no-regular-expression/
http://lazycoders.blogspot.co.uk/2007/06/stripping-html-from-text-in-sql-server.html
http://stackoverflow.com/questions/457701/best-way-to-strip-html-tags-from-a-string-in-sql-server
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to remove the lines above and below header in sqlplus report

I run a sql*plus report whch i want to be outputted to XLS file. But the format is not matching. I am using data->texttocolumns feature of excel , which is manual .
As the headers are coming dynamically from query . i CAN NOT set header off.
So first of all ,
I want to get rid of the first blank line above the hearder.
i want to get rid of the dotted line below header .

Hi,
You are not being clear here,
As the headers are coming dynamically from query . i CAN NOT set header off. You are saying that you have SQL*Plus script but can't use the SET command?
Besides, that I thing you want SET PAGES 0, instead of SET HEADER OFF.
If you could paste your SQL*Plus script here (Perhaps replacing the actual query with a very simple one, then perhaps we can help.
Regards
Peter

How to remove the background grayed color in oracle 11g (graph) reports

Hello,
We have an issue with oracle 11g reports. we migrated the reports from 10g to 11g version. for graphical oriented reports by default it displaying grayed backgound color. but i want to change it to set as white background please help me on this.
Edited by: user4661358 on Sep 12, 2010 11:00 PM

There is an excellent support note with several known issues in 11g related to graphs.
Reference
Known Issues Using Graph in FMW 11g (Doc ID 1328155.1)
Regards, RZ

How to suppress a warning message in BDC call transaction

Hi,
I was calling a BDC using CALL Transaction in mode N. But due to some warning messages the background job was not success. Please tell me how to overcome the warning messages in BDC.
Regards,
Satish

Hi tyr this way:
PERFORM bdc_dynpro      USING 'SAPMM07M' '0210'. " into the screen
      PERFORM bdc_field       USING 'BDC_CURSOR'           "cursor on the filed to update
                                    'DM07M-HSDAT_INPUT'.
      PERFORM bdc_field       USING 'DM07M-HSDAT_INPUT'   "assign values
                                     v_date.                                     "might get an warning so three enters...
      PERFORM bdc_field       USING 'BDC_OKCODE' " first enter
                                   '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "second enter
                                    '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "third enter
                                    '/00'.

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

How to remove the warning messages in CODE INSPECTOR of my report......?

Similar Messages

Maybe you are looking for