How To Remove Tone and Use As Filter

My Canon HV20 HDV camcorder makes a high-pitched tone that apparently is right at the 8kHz mark throughout my videos when I record live directly into Premiere Pro CS6 through FireWire.
Is there a way to use Audition CS6 or Premiere Pro CS6 to remove that tone and then somehow save that as a filter to use on all my videos?  It'd be great if I could do it without leaving Premiere Pro and having to open Audition.
I already use the DeNoiser effect in Premiere Pro and it takes care of white noise, but not this tone.
I tried the High Pass Filter (or the Low Pass Filter - I can't remember), but it just ruins the quality.
I was able to use the Healing Brush Tool and the Lasso Tool in Audition to remove pieces of the tone, just to experiment.  I've include a screen shot of it below.  I can't tell any difference in quality in the cut out areas, but I can't see doing this to every clip.
Do ya'll know of a better, easier way to do this and be able to use it as a filter for all my videos?
Also, when I use the DeNoiser effect in Premiere Pro, it removes white noise beautifully, but when I export, the first 2 seconds of the exported video has the white noise on it, but after the first 2 seconds, the white noise disappears.  But in the sequence, the first 2 seconds as well as the rest of the clip, has had the white noise removed.
Any idea as to why this happens?
Thanks for any help ya'll might offer.

If the tone really is a single (or at least narrow band) frequency like the picture shows, I'd try the Notch Filter on the Audition/Effects/Filter and EQ menu.  It might take some playing around to get the exact frequency and tweak the amount of cut you apply vs. the effect it will have on surrounding frequencies--but if you can get the right balance, you can then easily apply this to the whole of every file.
Sorry, can't help on the Premiere Pro question since I only use Audition.

Similar Messages

  • How to remove bullets and spacing for url links in the Related Links iview?

    I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
    All I need is to remove the bullets and increase some vertical spacing between the links.
    Currently, it looks like this:
    URL iView A
    URL Iview B
    I go through the whole section of Related Links properties, none of them seems to do what I want.
    Here are the list of properties in Related Link section (of Navigation Panel):
    Link Color
    Text Decoration of Link
    Hover Color
    Text Decoration of Hovered Link
    Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
    Thanks for advice.
    Kent
    Post with Diagram Illustration:
    <a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
    Message was edited by: Kent C.

    Hi, Kai.
    I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
    For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
    If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
    Thanks for help.
    Kent

  • How do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

    how do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

    Remove all current Adobe software.  Download Adobe Cleaner Follow instructions.

  • How to remove the Sessions used in the application

    Hai Techies,,,
    i am using many number of sessions in my application, for example i am using 5 sessions in reports module
    my application is a web based application
    if can't remove the sessions it contains the huge amount of data , my application is going into mess, and the application performance will be decreased..
    Can anybody tell the solution for this Problem
    How to remove the Sessions used in the application
    Hoping a reply
    Thanks & Regards
    Krishna mangamuri

    Hai Gita,
    i am not able to do the session invalidate method bcoz, i am mainatainting the session from login along with the current userid who is login into the system and putting some of the data in session....
    thats session is to be valid upto when i click on logoff link
    except that i have to remove the sessions in my application
    while navigating from one jsp to another i have to remove the sessions, bit somes times that sessions may be used somewhere
    Can u Understand My problem
    session remove method may also helpful to me but some times it will casue some prob to me
    Is there any other Way to remove the sessions in the Application ????
    Thanks & Regards
    Krishna Mangamuri

  • How to set-up and use FAMILY Sharing

    Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
    We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
    We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
    From what I read we should be able to share our purchased Apps between family members.
    So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared.  So ok I will try and get Apps directly via the Ipad using the App Store.  To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again. 
    Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
    Thanks for your help
    Greg

    Hey GregWr,
    Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
    Sharing purchased content with Family Sharing - Apple Support
    http://support.apple.com/en-us/HT201085
    Which purchased content can I share using Family Sharing - Apple Support
    http://support.apple.com/en-us/HT203046
    If you don't see your family's shared content - Apple Support
    http://support.apple.com/en-us/HT201454
    Thanks,
    Matt M.

  • How do I access and use my Itunes library from a different/new computer?

    How do I access and use my Itunes library from a different/new computer?  My computer is no longer working, so I need to be able to access my library from my wife's computer.

    Your library will only be where you put it.  Copy everything from your backup copy of your old computer to the new one.
    You can redownload some itunes purchases in some countries:
    Download past purchases - Apple Support

  • How do I access and use my iTunes library on a different computer?

    How do I access and use my i Tunes library on a different computer?

    The iTunes library is only where the user puts it.  If desired to have on an additional computer, put it there by copying the ENTIRE iTunes folder from the existing computer to the new computer.

  • I want to buy photoshop creative cloud for teams, how users can install and use it?

    i want to buy photoshop creative cloud for teams, how users can install and use it?

    Cancel old and buy new is the only way I know, but you MAY be able to exchange
    Return, cancel, or exchange an Adobe order

  • How do I find and use the "Spotlight Effect" in PS6?

    How do I find and use the "Spotlight Effect" in PS6?  I was using it yesterday and now I can find it ... help!

    Hi,
    I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
    There are also some presets under Presets including a Default Setting.

  • I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

    I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
    How can I access and use documents and drawings created on the PC based computer ?

    Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier.  See this tip if you must go newer.  Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server.  I'm not sure if the new black Mac Pro supports that configuration or not.
    iPhoto, there is an iPhoto for all versions of Mac OS X.
    iTunes, there is an iTunes for all versions of Mac OS X.  Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature.  Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
    Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
    GIF - Viewing GIFs Apple's Preview can do that.  Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
    DMG is able to be opened by all versions of Mac OS X.  This are just "disk images" which store programs on a virtual disk that will open when double clicked.    Frequently you'll find the installer of the said program inside.  To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
    Otherwise see the resources on:
    https://discussions.apple.com/docs/DOC-2455
    If you end up deciding to stick with Snow Leopard.

  • How to set up and use AirPlay

    How to set up and use AirPlay

    Welcome to the Apple Community.
    AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
    Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

  • How can I access and use the alphabetical keyboard of the phone ?

    How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use.  Thanks for your help !

    Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard.  I had to give up and wait until I was back in my country (no password is then needed).

  • Re: How do you create and use "common" type classes?

    Hi,
    You have 2 potential solutions in your case :
    1- Sub-class TextNullable class of Framework and add your methods in the
    sub-class.
    This is the way Domain class work. Only Nullable classes are sub-classable.
    This is usefull for Data Dictionary.
    The code will be located in any partition that uses or references the supplier
    plan.
    2- Put your add on code on a specific class and instanciate it in your user
    classes (client or server).
    You could also use interface for a better conception if needed. The code will
    also be in any partition that uses or references the supplier plan where your
    add on class is located.
    If you don't want that code to be on each partition, you could use libraries :
    configure as library the utility plan where is your add-on class.
    You can find an example of the second case (using a QuickSort class,
    GenericArray add-on) with the "QuickSort & List" sample on my personal site
    http://perso.club-internet.fr/dnguyen/
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    http://perso.club-internet.fr/dnguyen/
    Robinson, Richard a &eacute;crit:
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Richard,
    Your question about "utility classes" brings up a number of issues, all of
    which are important to long-term success with Forte.
    There is no such thing as a static method (method that is associated with a
    class but without an implicit object reference - this/self/me "pointer") in
    TOOL, nor is there such thing as a global method (method not associated
    with a class at all). This is in contrast to C++, which has both, and
    Java, which has static methods, but not global classes. Frequently, Forte
    developers will write code like this:
    result, num : double;
    // get initial value for num....
    tmpDoubleData : DoubleData = new;
    tmpDoubleData.DoubleValue = num;
    result = tmpDoubleData.Sqrt().DoubleValue;
    tmpDoubleData = NIL; // send a hint to the garbage collector
    in places where a C++ programmer would write:
    double result, num;
    // get initial value for num....
    result = Math::Sqrt(num);
    or a Java programmer would write:
    double result, num;
    // get initial value for num....
    result = Math.sqrt(num);
    The result of this is that you end up allocating an extra object now and
    then. In practice, this is not a big deal memory-wise. If you have a
    server that is getting a lot of hits, or if you are doing some intense
    processing, then you could pre-allocate and reuse the data object. Note
    that optimization has its own issues, so you should start by allocating
    only when you need the object.
    If you are looking for a StringUtil class, then you will want to use an
    instance of TextData or TextNullable. If you are looking to add methods,
    you could subclass from TextNullable, and add methods. Note that you will
    still have to instantiate an object and call methods on that object.
    The next issue you raise is where the object resides. As long as you do
    not have an anchored object, you will always have a copy of an object on a
    partition. If you do not pass the object in a call to another partition,
    the object never leaves. If you pass the object to another partition, then
    the other partition will have its own copy of the object. This means that
    the client and the server will have their own copies, which is the effect
    you are looking for.
    Some developers new to Forte will try to get around the lack of global
    methods in TOOL by creating a user-visible service object and then calling
    methods on it. If you have a general utility, like string handling, this
    is a bad idea, since a service object can reside only on a single
    partition.
    Summary:
    * You may find everything you want in TextData.
    * Unless you anchor the object, the instance will reside where you
    intuitively expect it.
    * To patch over the lack of static methods in TOOL, simply allocate an
    instance when required.
    Feel free to email me if you have more questions on this.
    At the bottom of each message that goes through the mailing list server,
    the address for the list archive is printed:
    http://pinehurst.sageit.com/listarchive/.
    Good Luck,
    CSB
    -----Original Message-----
    From: Robinson, Richard
    Sent: Tuesday, March 02, 1999 5:44 PM
    To: '[email protected]'
    Subject: How do you create and use "common" type classes?
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance

  • Does my macbook air have a built in virus scan?  how can I access and use it? also any recommendations of what software if this is not avail ?

    does my macbook air have a built in virus scan?  how can I access and use it? also any recommendations of what software if this is not avail ?

    Contrary to what Geeks on Hugs is telling you, Mac OS X does indeed have a basic malware scanner. It is not a feature that is directly accessible to the user, and works a bit differently than every other malware scanner out there. Gatekeeper, which has been mentioned here, is entirely separate, and provides a different method for helping to protect you against malware.
    The anti-malware scanner in Mac OS X is called XProtect. When you download an application (or any other kind of executable code), it is automatically "quarantined," so that when you open it you're asked if you really want to do that. I'm sure you're very familiar with this aspect of Mac OS X if you have ever downloaded any apps from outside the App Store. What you don't know, though, is that each time you try to open a new app, that app is checked by XProtect. If it is identified as malware, you will not be allowed to open it, and will be warned that it's malware.
    At this time, there is no known malware that can infect a properly up-to-date Mac. All current malware will be blocked by one or more methods.
    For more information, see my Mac Malware Guide.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

  • IN MY IPHONE 5 FACE TIME IS NOT THERE HOW CAN I DOWNLOAD AND USE IN DUBAI

    IN MY IPHONE 5 FACE TIME IS NOT THERE HOW CAN I DOWNLOAD AND USE IN DUBAI
    <Personal Information Edited by Host>

    An iPhone originating from the UAE will never have FaceTime.
    (113483)

Maybe you are looking for