How to remove unwanted rounding

I created a custom KF (ZBILL_QTY) with the fix unit = Dozen. with 0.000 decimal places in the properties of KF
And write a routine to get divide 0BILL_QTY (Base UOM = 'PC') by 12 and save into the ZBILL_QTY.
The problem is the figure display in the report always round up which I don't want it
i.e 0BILL_QTY = 1 PC I expected ZBILL_QTY = 0.0833 DZ but the it display 1 rather.
I check the record in the cube and it display 0.0833 correctly and i also set the number of decimal places to 0.0000 in the query.
Please advise how can i remove unwanted rounding ?

hi ,
Although that should work fine but if not can u try:
1.Is scaling factor for that KF is on or not,i mean test different setting with scaling factor ,Mostly it should be "not defiened"
2.A silly try ,create a formula and use this key figure in that and don't change any setting of decimals,and see uo to what place decimals it gives in report.
Thanks
Mukesh
Edited by: Mukesh Sharma on Dec 12, 2008 5:41 AM

Similar Messages

How to remove unwanted plugins (and no I don't want to read any unrelated articles that never answer your question)?

I want to clear out the unwanted plugins in Fire Fox . One plugin even has a warning about not using it (Java Deployment Toolkit). But every time I ask "how to remove a plugin?" , I am redirected to an article that doesn't answer the question. And then the circular argument begins again without ever actually answering the question.
IS IT NECESSARY TO UNINSTALL FIREFOX TO REMOVE A PLUGIN??????

Plugins like ex Flash and Java etc are not installed in Firefox like Extensions and Themes are. They are on system and Firefox has found and is making use of them. This is why you can only activate/deactivate which tells Firefox to make use of that Plugin on system or not.

I want to purchase Apature, but In the advertising blurb I dont see how to remove unwanted objects from a photo. I know it can be done in Adobe Elements, but I would rather Apature.

I want to purchase Apature, but in the advertising blurb I dont see hoe to remove unwanted oblectsfrom a photo. I know it can be done in Adobe but I would rather have Apature.

What DiploStrat said.
To expand a little bit: Aperture allows you to assign a graphics program (such as PSE) as an "external editor". In general, you use Aperture to organize your photos, to develop them (make them as good as possible for each use), and to publish them (create share-able files). Your external editor is used when you want to create a new graphics file, which is what happens in all "destructive pixel editing".
Aperture provides tools to remove sensor spots from skies (and like operations), but for removing people and billboards you'll want a proper compositor, a/k/a a graphics program.

How to remove unwanted from desktop

My macbook air was once used some pen drive and some unwanted appeared on my desktop i want to remove that . How?

Please help me whenever you find an answer for my problem

How to Remove Unwanted HTML Text Appearing in Compiled Help Topics

I am working on a RoboHelp HTML project in version 7.03.001. Recently, when checking files into source control, the program we use informed me that two of my topics (htm files) and the index file (.hhk) were "conflicted."
When I examine the compiled topics, I see a string of HTML code at the very top of the topics, above the topic titles. Here is an example:
When I look at the HTML view, for the same topic, this is what I see:
Temporarily removing this line of code did not resolve the issue. The unwanted text was still displayed after compiling.
Another thing to mention is that several strange files also appeared in various project folders--files associated with the suspect topics and index:
I don't know what these files are for or if they can be deleted. In addition, I generally don't do much work in the HTML code, so I was wondering if anyone might know what would cause this and also how it can be fixed.
Thanks for your help!

Those additional files look like revisions of the files that have the problem. If you open up the files that have a suffix of .mine, .r64214 and .r65414 do these have the same issue? if sounds like you have a source control file version issue here but it is hard to tell without some more detail. Hope this gives you some clues for things to look at but do come back if you need further help.
The RoboColum(n)
@robocolumn
Colum McAndrew

How to remove unwanted audio using audio effects?

The audio effects in question: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d80a .html
I've been meaning to learn how to do this for a while so I thought I'd get started.
I want to learn how to clean up my audio. I don't have very professional audio gear, I'm using a Rode videomic pro on a canon 60D so the quality isn't the best but it's ok for now. There is a lot I want to learn but right now there are 2 things on my mind:
1. I have a deadcat wind muff on my rode but still when the wind hits it I get this unwanted wind sound on my soundtrack. I know there has to be a way to remove or reduce this somehow using the audio effects.
2. Slight white noise over my audio. I know this is a result of recording directly from my camera but there has to be a way to reduce the white noise in order to get clearer audio. I've seen people recording right out of their camera and they have way better results than me.

I know there has to be a way to remove [wind noise]
There is. It's called ADR.
there has to be a way to reduce the white noise
There is. Better equipment.
Sorry but, I think you may be expecting to much of your post production tools.

How to remove unwanted contacts in the Messages app

im having a problem with the messages application. everytime i want to start a new chat and look for a certain name my old Icloud contacts pop up. i always click the and press on "remove ___ from chat" but it only works for like 5 mins then they pop up again. its really annoying because i always send pictures to my phone using the Share/Messages and i always think i could end up sharing it to one of those unwanted contacts. ive done everything possible to remove them i even made a new icloud account but its no use. not even my phone has those contacts anymore i dont know why its doing that. any suggestions?

Hi Tidbits,
I ended up going to Best Buy, where I got my LG G3 Verizon phone. The Tech tried everything to correct the duplication, but could not find how to do it. He deleted everything, and went back to factory settings. Darn if the duplicates didn't come back.
He went to my Verizon account, and went to the Verizon Cloud. Clicked on Contacts, and there were all the duplicate contacts. He deleted the duplications, leaving the original for each contact. BINGO the problem was solved.
I am using the Standard Messaging instead of Verizon messaging Plus. The Tech said that if I had been using Using Verizon Messaging Plus this may not of happened. I just down want the added cost of Messaging Plus.
Thanks for the response.

Unsure how to remove unwanted rectangular marquee settings

PS CS3 version
Hello,
The rectangular marquee tool seems to have 'remembered' a setting with rounded corners and a feathered edge.
I've tried chucking the Photoshop prefs file, but still the unwanted setting is there on the tool.
Please could anyone advise me how to return the settings to standard clean rectangular selection?
Many thanks,Gill Keeley

Hi J
Will do.
Thanks for your help. Appreciated.
Hope your day goes well.
Gill

How to remove the rounding of excise in the FI document...

Hi all,
I am facing a typical problem. The requirement of my client is that the out going excise invoice generated from the J1IIN transaction should show fractional value in all documents i.e. without being rounded. Earlier all the values from the SD were shown after rounding. After some changes we are able to fetch all the data in the fractional except the excise. when we see the FI document generated after the J1IIN, the excise value is still shown in the rounding. My confusion is that in the condition value the excise is shown in fraction,when viewed the excise invoice in the display mode from J1IIN its still showing in fractional.Also I have checked the values posted in the excise gl are in fraction. Its OK.But why the excise values are shown in rounding in the FI document only? How it can be shown in fraction also? Can any body suggest from where the rounding of excise in the FI document is triggered?
I have checked that in the configuration of the condition type for excise, the rounding rule is commercial, in the logistics general for the configuration of company code setting the check box for the rounding of out going excise is deselected.
I just want the input/lead what could be the other reasons that this is happening.
Thanks/Regards
Debabrata

Dear Amit,
Thanks a lot for your quick response. But you may read again to my post. I have mentioned it very clearly that the setting suggested by you is already done.Please suggest if there is any other reason of the same.In fact I would like to tell that I have checked all settings that control the rounding in excise. For example, the rounding in the corresponding condition type, in the company code setting of the logistics general,even I have tried with assigning different routine in the pricing procedure.
Please suggest.
Thanks/Regards
Debabrata

How to remove unwanted pop ups in safari Version 8.0.3 (10600.3.18)

I have OSX Yosemite version 10.10.2
I am getting unwanted pop ups in my safari Version 8.0.3 (10600.3.18)
This started after I was trying to watch live cricket on the net .... It asked me to download HD quality application .... I have deleted that application but till now I am getting pop ups whenever I browse...

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/

How ro remove unwanted Product Categories in SRM 5.0 Extended Classic

Hello Everyone,
I have an issue with unwanted Product Caterories in production SRM. I have read seveal articles on using tow different code to delete the PC, but can't seem to get to a good solution.
1. use t-code Com_Hierarchy and delete the PC, but my trash can is grayed out and I'm not sure how to get it clear.
2. use com_product_delete_single and notes that i have to register and then fill in a table COMC_PR_TOOL_RE. when I try this in DEV the table is not define and the proces doen not seen to go anywhere.
Can some help me is either case, I like number 1, but thatjust seem to easy.
Thanks,

Sammy,
in the COMM_HIERARCHY transaction go inside the hierarhcy for the Product Groups, F6 to change the mode in "change mode" and then doble click on the Product Category you want to delete. Then you can see the trash can is active and you can delete a Category.
NB: the system give you a warning message that the source system is not srm. Just jump it with another Enter.
Hope this can help you.
Best Regards,
Maria

[SOLVED] how to remove unwanted KDE panel launchers?

Hi, please take a look at this image .
Those two icons are bothering me a lot. For one, I didn't create them manually (I only created the first 3 icons). Second, firefox icon is invisible, but the launcher is there. ALso, even if I remove them from the panel (right click -> remove this launcher), they keep reappearing after reboot/login.
Please help me permanently remove them.
Thanks
Last edited by spiritwalker (2011-09-05 16:56:46)

Yes, they're the default webbrowser and filemanager or something. There are threads about this on the forums and KDE 4.7.1 is just round the corner, maybe it will fix it.
https://bbs.archlinux.org/viewtopic.php … 61#p971361
Last edited by karol (2011-09-05 16:51:02)

How to remove unwanted spaces in a string

Hi all,
    Iam taking a txt field txt50 which is containing many unwanted spaces between words in it. and i want to remove all unwanted spaces between words. Please tell me the solution it.

Hi,
     TRY THIS
DATA : TEXT(50) VALUE 'My name is Roshan Lilaram Wadhwani',
       LEN TYPE I,
       POS TYPE I,
       COUNTER TYPE I,
       V_CH,
       V_SPACE VALUE ' ',
       V_TXT(30),
       V_TXT2(20).
COMPUTE LEN = STRLEN( TEXT ).
DO LEN TIMES.
V_CH = TEXT+POS(1).
IF V_CH EQ SPACE.
COUNTER = COUNTER + 1.
ENDIF.
IF COUNTER LT 3.
CONCATENATE V_TXT V_CH INTO V_TXT.
ELSE.
CONCATENATE V_TXT2 V_CH INTO V_TXT2.
ENDIF.
POS = POS + 1.
ENDDO.
WRITE : / V_TXT.
WRITE : / V_TXT2.
<b>Reward points</b>
Regards

How to remove unwanted sapccm4x agents?

Hi Guys
We just recently moved two SAP instances from one server to another, and I'd like to remove the registered agents for the old servers
On RZ21 --> Technical Topology, for SAP system S01 as example, there are two entries:
OFFLINE for the older system (WS10) and unwanted agent
ONLINE which is the new registered agent on new server (WS03) properly working
[Click to see screenshot|http://i56.tinypic.com/2powc2p.jpg]
Using the sapccm4x -u parameter on the new server WS03 only un-register the agent on that server, not the older one
I need to remove the agent from the old server (WS10) and since the S01 SAP instance was removed before unregistering the agent Im not able to remove the entry from there.
RFC connections were updated but that is not solving this.
Is there any workaround at DB level or some trick to remove those unwanted entries?
Thanks!

Hi Rajeev
I have tried with parameter -u, but only can be executed from the former server (WS10) and not from the new (WS03).
Unregisterig the agent using the old profile WS10 is not resulting as expected, since it removes the agent associated to the new server.
Also, there is no Trash Icon/Delete Feature on RZ21, allowing to remove the unwanted entry
Thanks!

How to remove unwanted deployed web dynpro application

Hello,
I am using NWDS 7.1 Visual composer to develop the web dynpro application
I had created many application and deleted it from NWDS Visual composer
now each time i had deployed the application so its showing me the deployed roles in the portal so there is lost of duplicate role name in the portal and all deployed iviews and pages are displaying in the administrator account.
Please help me to remove this unwanted roles and application.
Thanks,
Dhruv

Hi Dhruv,
Start your Visual Administration and then navigate through Cluster tab Server>Services>Deploy>Runtime tab>Server>webdynpro>expand the node and selected the unwanted Webdynpro application and click on "Remove" button.
Regards
Basha

How to remove unwanted rounding

Similar Messages

Maybe you are looking for