How to remove white question marks on Windows desktop icons?

For a few weeks now, most of my desktop icons (Windows system) have been covered with a white question mark within a blue circle. It's more of a nuisance than a severe problem. Today I noticed that the HP Support Assistant on my desktop is the one and same white question mark within a blue circle. So finally I hoope I have found the cause. But now what is required to remove these marks?

What is the exact model # or product #?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

How to remove the question mark from the dock

How do I remove the question mark from the dock. Nothing I tried works.

What have you tried?
What happens when you click on it? Does a menu appear?
Would you provide a screen shot (SHIFT COMMAND 4).
Ciao.

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

How do I remove the question mark on my dock? When I move my cursor over it it reads "photos".

How do I remove the question mark on my dock?
When I move my cursor over it it reads "photos".

Everything in the Dock is an alias.... that is a tiny file that points to the original app, folder or file.
If the original app, folder or file is missing or not accessible in some other way (deleted?), it displays a question mark.
You remove it the same way you remove any icon from the Dock.
Simply drag the icon up away from the doc a couple of inches and let go of it.
It should just disappear with a poof and some clouds.

White Question Mark instead of White Apple comes up when booting up. Why?

White Question Mark instead of White Apple comes up when booting up.
Hi guys,
It happens regularly on booting up and then booting up stops, and I have to turn the iMac off and turn it back on again, sometimes several times, before getting a regular boot up.
What is that about, and how to avoid it?
Thanks,
Raphael

Thanks.
I just found an Apple article dedicated to that called "Gray screen on startup."
Symptoms
Instead of seeing the Finder or the login window after startup, your computer may stop responding and the display may only show a persistent gray screen (you may also see an Apple logo, spinning gear, spinning globe, prohibitory sign, or a folder with a flashing question mark on it). Note: The below steps may not apply if a blue screen appears during start up.
Products Affected
Mac OS X 10.4, Mac OS X 10.6, Mac OS X 10.5
Resolution
Note: Some steps below may reset preference settings or registration settings.
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
Reset the NVRAM / PRAM
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Reset the NVRAM / PRAM.
If the gray screen issue persists, go to the next section.
Start from your Mac OS X Install disc; use Disk Utility
Insert your Mac OS X 10.4 or 10.5 installation disc (if you have discs with both versions, use whichever is closest to the Mac OS X version installed on your Mac; do not use a startup disc which came with a different Mac or which contains an earlier version of Mac OS X).
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start up your Mac while holding the C key to start from the disc.
Once started from the disc, choose Disk Utility from the Utility menu.
Note: If the gray screen issue persists and you can't start from the disc, go to the "Disconnect peripheral devices" section.
In Disk Utility, perform a disk repair of your Mac OS X volume; if no issues are found, perform a permissions repair as well. If issues are found during the disk repair, try repairing again.
After the Disk Utility operations are complete, restart without holding any keys.
If the gray screen issue persists, go to the next section.
Check your cables and power source
Make sure your power cables are secure (especially if you use a desktop Mac). Try a different cable or outlet if possible. If you use a surge protecter, try connecting directly to an outlet as a test.
If you have power-related issues (such as your desktop Mac shutting down or restarting, or room lights dimming when an appliance comes on, consider contacting a certified electrician to check your outlets and electrical wiring).
If the gray screen issue persists, go to the next section.
Remove third-party RAM and internal hardware
Note: Skip this section if only Apple-brand RAM is installed in your Mac.
Remove any non-Apple RAM or other third-party hardware upgrades (such as expansion cards or third-party optical drives or hard drives, if present) to help isolate the issue. This is necessary to get as close as possible to the original factory hardware configuration of your Mac.
If you are not sure which RAM modules or other hardware is Apple or third-party, or if you are not comfortable performing these steps, or if you have a Mac mini, consider contacting an Apple Authorized Service Provider for assistance. Otherwise, perform these steps before going to the next section.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Open your Mac to access the memory slots. Refer to the User Guide that came with your Mac, or search Apple Support Manuals for a PDF copy of your Mac's User Guide.
Remove any third-party RAM that has been installed.
Reinstall the Apple RAM that came with the computer if available. Note that Mac OS X 10.5 requires 512 MB or more of RAM; Mac OS X 10.4 requires 256 MB or more of RAM.
If your Mac starts up with only Apple RAM installed, contact the vendor of your third-party RAM.
If the gray screen issue persists, go to the next section.
Perform an Archive and Install installation of Mac OS X
If the above steps do not resolve the issue, and you can successfully start from your Mac OS X Install disc as noted above:
Insert your Mac OS X 10.4 or 10.5 installation disc (if you have discs with both versions, use whichever is closest to the Mac OS X version installed on your Mac; do not use a startup disc which came with a different Mac or which contains an earlier version of Mac OS X).
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start up your Mac while holding the C key to start from the disc.
Perform an Archive and Install installation (preserving users and network settings).
After installation, if the gray screen issue persists, go to the next section.
Perform an Erase and Install installation of Mac OS X as a last resort
Important: You should only perform this step after trying all of the above steps. This process will erase all files from your Mac OS X volume. If possible, back up important files first, or use Time Machine. You may be able to connect your Mac to another Mac with a FireWire cable and FireWire target disk mode, in order to try to manually back up files. Alternatively, you may wish to make an appointment with a Mac Genius at an Apple store, or contact an Apple Authorized Service Provider for assistance.
To erase your Mac OS X volume and reinstall Mac OS X:
Insert your Mac OS X 10.4 or 10.5 installation disc.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Startup your Mac while holding the C key to start from the disc.
Perform an Erase and Install installation of Mac OS X.
After installing, starting from your Mac OS X volume, and verifying the issue is resolved, you should use Software Update to update to the latest available version of Mac OS X.
Additional Information
If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
If the issue only occurs when multiple peripheral devices are connected
If a gray screen appears during start up only when several peripheral devices (that is, USB and/or FireWire devices) are connected, and you don't want to have only one device connected at a time, the issue may be caused by a combination of the peripheral devices.
To illustrate this hypothetically, you may have three USB devices, which we'll call "A", "B", and "C". The issue may be that peripherals A and C have a conflict of some sort, and a gray screen only appears if they both are connected, but not if each one is connected separately. In the above "Disconnect, test peripheral devices and network cables" section you may have inferred that you have an issue only with device C because it was added after A. To avoid an inaccurate analysis, connect device C to your computer with no other devices. If your Mac has the startup issue with only device C connected, then you know it is the source of the issue. However if your Mac starts up, you have a conflict of devices to work out. To do this add the other devices one at a time with device C connected until your startup issue occurs (restart after adding one device). Repeat this process until you have just the minimum set of devices to produce your startup issue.
What can you do?
You should make sure each device has the latest firmware installed if applicable--check with the manufacturer for more information. You should also check for the latest driver versions, and if necessary install them while started in Safe Mode per above.
If any of the devices requires a separate power source, be sure that power is connected to the device (for example, even if a device appears to be powered when connected via USB without the power cable, connect its power cable).
Try different USB or FireWire cables with each device, as applicable.
If you have a device similar to one of the conflicting devices, try replacing it with another one.
Contact each device manufacturer or the materials that came with the device. for more support information or, if needed, service options.

Video error - seeing white question mark when post to my webpage.

Hey everyone, I was wondering if you can help me out.
I recently updated my software and now I'm using iWeb 2.0.4. I created a video using Final Cut Pro and rendered out a .m4v version which I've done several times in the past without a problem. The video of course plays fine in iWeb, I click Publish To Folder (since its not going to a .mac account), then upload the site via FTP. Once on the site, I get a white question mark.
So what I'm wondering is this...could it be the update thats causing the problem OR could it possibly be the server I'm using? This server I've never used before so I don't know how it handles video. Maybe it can't play QT or something...I don't know? I've done this exact same thing several times before and don't know why I'm having problems now. Its only a 3 min. video. I posted ones a lot bigger without a problem but those we put on another server.
If someone could offer me a suggestion I would appreciate it. Thanks!

Welcome to the Apple Discussions. Have you tried using the Publish All to MobileMe menu option? Also you can publish to a folder on the desktop and check to see if the movie file is getting included with the other files.
When you're viewing your site with Safari use the Window->Activity menu option. There you can view all the files that are loaded when your page loads and see the size and if it's there at all.
OT

How to fix the " flashing question mark after the finder icon when starting up" withou an apple keyboard?

Hi
I am wondering How to fix the " flashing question mark after the finder icon when starting up" without an apple keyboard. I have 2 of those .7Ghz emacs so just wanna fix them
Thx

Hi,
>I am using a wireless standard keyboard so maybe the emac doesn't regognise it
Installation of driver software may be required. Do not expect any wireless device to automatically work with a Mac unless guaranteed to do so. In a case like this, use a wired USB keyboard (a PC keyboard should be OK) and a wired mouse to begin with.
>I have installed Ubuntu 13.00 on the HDD from another computer.
Is it a version for PowerPC?
https://wiki.ubuntu.com/PowerPCFAQ
https://wiki.ubuntu.com/PowerPCDownloads
>a list of eMac hotkey's that can be used before OS boot from a standard Windows keyboard?
Could the following article be of interest?
http://support.microsoft.com/kb/970299
If/when starting from a bootable CD, press and hold the C key.
Jan

What does the white question mark in a black circle mean in the itunes wind

I have copied from my old PC my itunes music folders into my new PC. All my music and podcasts now have a white question mark in a black circle next to each line in the first column on the window. When I try to add music to my new nano i can only do this if I first play the song/podcast, this makes the question mark disappear.
Is there a way I can 'uncheck' all these question marks without having to go into each item?
I have not yet tried to sync my old Ipod photo.

Hi Again
Page 291 of the Aperture 2 manual goes through the different badges used in Aperture - for the black tick on white background it states;
The image is an album’s pick image, the identifying image for that album,
webpage album, web journal album, Light Table album, or book album.
pearcie

How do I get rid of the question mark in my FaceTime icon?

I can't use the FaceTime on my phone. There is a question mark in the FaceTime icon. How do I get rid of it so that I can FaceTime?

to answer that question we need more information. like did you verify that you have facetime enabled in your settings
Also, what carrier are you using.

Instead of an image i get a box with a blue square and white question mark help?

Lately instead of images coming up I have been getting a blank box which in the center has a smaller blue square with a white question mark inside, does anyone have any suggestions. Using safari version 8.0.3 on mac OX X Yosemite 10.10.2

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Firefox is not displaying alt codes correctly, substituting a black diamond with a white question mark in their place.

Alt codes (such as ® for "registered" and  for "trademark") are being displayed as a small black diamond with a white question mark inside of it. This has also started happening to more simple characters such as exclamation marks, dashes and apostrophes.
Any ideas?

Thanks for your reply cor-el.
My posting actually included the alt code syntax, and is now rendered as the corresponding special character. I guess this isn't a surprise!
And no, it was rendered just fine. This morning when I went into the browser to see the problem, it was not mis-displaying as it had been...it had somehow changed and was behaving very nicely. That's all fine, but I'm a little bit wary of this FF browser functionality now...steady as she goes.
Also, I did check the (View > Character Encoding) you recommended, and after experimenting a bit discovered that using "Unicode (UTF-8)" made the wierd black diamond/white question mark character come back in all of the same places it was occuring...up until this morning. I've set my browser default to "Western (ISO-8859-1)" now, and everything is displaying as it should.
Thanks for your reply and suggestions. I hope others will learn from these experiences.

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

How to remove black "blocked plug-in" window that opens with iPhoto and covers everything under it?

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

Blue Box with White Question Mark

All of a sudden, I started receiving the Blue Box with a White Question Mark in my Safari Internet. I test the site with two other browsers and the behavior was the same. I have not plug-ins recently installed and did clean my cache. Any suggestions? Running Mavericks. I ran an Adobe Flash update yesterday, but the behavior is affected today. I reset Safar after runnign Disk Utility<Repair Disk Permissions.

Where precisely do you see the "?"

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

How to remove white question marks on Windows desktop icons?

Similar Messages

Maybe you are looking for