How to remove Write Protected Phone Memory of Noki...

i have 500 also and my problem is same. I have some pictures in my phone memory and in my memory card too. From some reason I cant remove these pictures away from my phone memory. This is really annoying 'cause now i cant even got any emails 'cause "phone memory is full, try to remove some files".. BUT I CANT REMOVE ANY FILES 'CAUSE ALL FILES IN MY PHONE MEMORY IS WRITE PROTECTED, EXPECT TEXT MESSAGES!! I'm removed over 600 text messages allready but there was no help to situation.. I think that i'm gonna talk with some1... 
My english is very bad. Hope U get it (: 
i'm from finland, Nokia's from Finland but theres no finnish languages for discussions.. Or I'm just stupid and cant found it ..
Moderator's notes: The post was edited. A more appropriate subject is provided.

@jossu
Have you tried clearing "browser cache"?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • How to remove write protection on an SD card

    Hi I have just bought a fuji camera with a detachable lens has soon as I added the lens to the camera it said that I must update the firmware on my new lens no problem I thought the instructions said down load the appropriate firmware onto your desktop then format the sd card in your camera then put the card into a card reader then add the downloaded firmware to your sd card  then put the card back into the camera the problem is ithe sd card will not let me add any files to my card it says write protection on an SD card please can somebody please tell me How to remove write protection on an SD card.

    How is the card formatted?
    You can check this in Disk Utility.
    Macs can read and write Microsoft FAT format. Microsoft NTFS format is read only unless you get a copy of this: http://www.tuxera.com/products/tuxera-ntfs-for-mac/

  • How store data permanent in phone memory?

    How store data permanent in phone memory?
    With RecordStore records are removed when Midlet is remove.
    Using resource file from JAR (getResourceAsStream) not solve problem
    beecause resource is on Midlet JAR.
    I want use data from previous Midlet after install new version of same Midlet.
    How write and read data outside of Midlet Suite?

    As you already found out, it doesn't work with MIDP 1.0, because of the sandbox model.
    My (weird) suggestion: Make a server-based backup procedure. You implement a functionality in your MIDlet to connect to the server and backup or restore the data via HTTP. Before updating, the MIDlet uploads the data, and after updating, the new MIDlet downloads the data. But then you have to implement a user database on the server...

  • Remove Write Protection of my HD

    I have two WD-My Passport HD, 500 GB. Im using them as a DJ device. I formatted them in MS-DOS (FAT), using the Disk Utilities. But after I put the songs in the HD, when I connect it to the CD Player, it appears the message "ERROR - Remove Write Protection”. How do I remove this protection?

    Thanks very much for replying! I have had my memory stick for a good while and it has always worked perfectly fine on any computer (OSX and Windows) and I've been able to save or delete files as I wish. But then suddenly the stick just wouldn't let me save any files in it anymore and says it's write protected (hope that's the right term, I'm not an English speaker). So I've been trying to figure out how to remove the write protection so that I would be able to use it as I did before, e.g. saving/deleting files. I came across with tips that said that in some sticks there could be a physical switch and just wanted to make clear that this is not the case with my stick. I did found some instructions how to remove the protection in Windows, but they were no use for me. Does this make it any clearer, I hope ?

  • How to remove the Object from memory.

    Hello.
    Flash file that i made with Flex Builder uses memory too
    much.
    Look at the next example source code.
    var testCan:Canvas = new Canvas();
    this.addChild(testCan);
    this.removeChild(testCan);
    testCan = null;
    but just memory usage still goes up, is not freed instantly.
    so if i load the large flash files on my web browser,
    after 5 munites or something, the web browser is down.
    How to remove the object from memory immediately without
    delay?

    It's all about the Garbage Collector ..
    There is a nice write up here :
    http://www.gskinner.com/blog/archives/2006/06/as3_resource_ma.html

  • Satellite A30-921: How to remove and replace the memory?

    hi, can anyone help me how to remove and replace the memory of sat A30-921. and also, please give a detailed instruction.
    thank you in advance.

    Hi
    There is no much to explain. At the bottom side in the middle there is placed memory cover (fixed with two screws). Remove the cover and you will see 2 slots there. I dont know how much memory has you there but as Stefan said you can use max 2 GB of RAM (2x PC2700 1024MB - PA3313U-1M1G). How to remove memory modules you can see on http://www.hardwaresecrets.com/article/189/5
    Bye

  • Remove write protection usb 8GB v250w

    Dear sir i have 8GB hp v250w usb .it is write protected. I want to remove write protection. I tried much but all in vain .plz help. I also want to format after write protection is removed. What should i do.

    I tried also to run C:\Windows\system32\diskpart.exe type : list volume then type: select volume # (replacing sharp with the number of the usb flash-pen) then type:  attributes disk clear readonly then type: attributes volume clear readonly ... but here again the error...  the flash-pen is in "health status"   even with HDDGuru Low Level Formatt I take this: 16/09/2012 15:44:27 Format Error occurred at offset 9,895,936: 19 - The media is write protected
    16/09/2012 15:44:27 Average speed: 26,5 MB/s
    16/09/2012 15:44:27 Low-level format is complete. Very disappoint... Have I to turn back to Kingston's DataTraveler?? 

  • Removing write-protection from a memory card

    How does one remove the write-protection from a memory car? I have been trying to copy some sound and pictures from my computer to my memory card, but it has been telling me that the memory card is write protected and I have to remove the write protection. someone please help!!!

    Hi tessiebest
    Is memory card in SD adapter in card reader on your PC, as there is a little slider on the SD adapter which you can slide to "lock" write protect?
    You can also "password protect" a memory card in your phone.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How can i remove write protection from a Hard drive

    Cant write to HDD on win7 keeps saying "the disk is write protected"  Drive is in a removable IDE caddy, I put the drive in a USB caddy and was able to format the drive, but still get the same error when i try to write to it, I took ownership of the drive and it shows me as the owner. The drive was used in XP previously but i no longer have an XP system since upgrading to Win7. I have removed the partition with Paragon drive copy and re partitioned the drive, renamed the drive but still gives the same error.

    I used succesfully diskpart (on my Windows 7).
    In "Command prompt" (Start -> Run -> cmd) type "diskpart" and press enter.
    (I wrote "cmd" and then on right click menu I clicked on "Run as administrator").
    In diskpart utility (in the same dos window) you have to type "list volume".
    You can see your disk (I see all my 4 partitions on the disk that give me the problem) with a progressive number index.
    Type "select volume #" and press enter, "#" is the number corresponding to your disk/partition.
    Wait the response.
    Then type "attributes disk clear readonly" and wait (I wait 2/3 minutes) for the result.
    It says that operation was completed, and I can write on my partitions (and run checking/scanning on it).
    Hi,
    The hard drive I had problems with had 3 partitions and at least one was write-protected. Just to make sure I used the above "diskpart" commands on each volume and it cleared the write-protected attributes and was able to format the 10Gb partition I used
    just for storing the Pagefile.sys file.
    The write-protect attribute on this WD AV 1Tb h/drive may have been added as it was previously used in my Foxtel IQ box. I used Ghost 11.5.1 to clone my failing WD 1Tb h/drive that had 1376 delays and 50 bad sectors when scanned with HDD Regenerator
    onto the previously used Foxtel IQ h/drive.
    Cheerz ;)
    Thanks again, I was pulling my hair out to find a solution.

  • How can I recover my phone memory after the software update...

    Hi,
    My has been dead for one day, after continuous trying, I got a pop window to install the updates. I thought only updates and clicked on it. But it took long time and my phone got reset. All my data which was stored on phone memory got wiped out. I didn't use blackberry link before. First time I used it and it was happened like this.
    Please help me how can I recover that data again. Please guys..I lost very important data..plz do help me..

    Hello,
    Restore depends on a source of data from which to restore. BB provides plenty of FREE methods to backup your data and thereby protect that priceless resource. If you did not avail yourself of that, then you have migrated from the latter to the former in this old saying...there are 2 kinds of computing device users -- those who have lost data, and those who will. Backups, like insurance, are neither a reactive nor an optional activity.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to recover notes in phone memory after hard re...

    Anyone please help me to recover my NOTES written in my NOKIA N97 as I've loist them cuz I  had to hard reset my mobile due to Start up failed contact retailer error was originated and it hanged my phone and I was unable to create backup of notes and after hard reset all of those precious notes i.e my articles for journals ,poetry and scripts etcs were deleted So please help me ! and tell me the way to recover phone memory  or even only those notes ! Data recovery software are deigned for PC's so when phone is connected to PC software detects the MASS storage but not the phone memory's help!
    -Regards
    SmQ

    Recuva is one memory card app that recovers data .
    http://www.piriform.com/recuva
    But its not going to see the C drive on the phone that you have overwritten  i guess .
     recious notes i.e my articles for journals ,poetry and scripts etcs
    Should be backed up always  be it phone or pc they are on  .
        jje

  • How to detect write protected SD card

    Hello all
    I couldn't find the answer to my question, so I have started a new thread.
    Problem: I would like for Labview (or TestStand directly) to programatically detect if an SD (secure digital) card has the "write protection" slider switch active.
    Is this possible somehow?
    PS: I was also not able to find this information anywhere in Windows 7 as well. I'm using LV 2011 SP1.
    PPS: At the moment I try to create a file on the SD card, and detect the write error, which tells me if the card is protected or not. But I would like a more elegant solution.
    Solved!
    Go to Solution.

    Unless you want to dive deeply into Windows device drivers itself and intercept some messages on that API level I'm afaid your way of detecting write protection is the only feasable one.
    The link by Marco might give you a feasable solution, the problem is that those flags are not always correct for all possible mediums including network shares.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How can i access Motorola phone memory?

    Hi to all,
    I have a big problem.
    I don't get at to access to motorola phone memory to read audio files.
    In particular i want to list all files inside all file system mounted on motorola phone.
    I tried in this manner:
    ArrayList array = new ArrayList();
    try {
    Enumeration enumFileSystem = FileSystemRegistry.listRoots();
    while (enumFileSystem.hasMoreElements()) {
    String root = (String) enumFileSystem.nextElement();
    FileConnection fc = (FileConnection)Connector.open("file:///" + root, Connector.READ);
    Enumeration enumFiles = fc.list();
         while (enumFiles.hasMoreElements()) {
    array.add((String)enumFiles.nextElement());
    }catch (IOException e) {}
    Please help me!
    It's very urgent!
    Thanks for any suggestions.

    Hi parvathy,
    Thanx for ur reply.
    I m sorry to say that it is not working in the device i870. While running the aplication, I got an error message "File System not supported" . When I call FileSystemRegistry.listRoots(), ./, / and /Storage Card were displayed in the list. When I tried to access ./ root, "bad file name" error is displayed. For the other two roots, I got "File System not supported" error. I was able to access and load the contents of the Starage Card by using the file URL "file:///Storage Card/". I want to read the pictures in the phone memory of iDEN phones.
    Please help Me...

  • How can i clear my phone memory

    how can i clear the folder by the name of private in the phone memory

    You can do it thru' a 3rd Party File explorer like X-plore..but a word of caution - Do it if you are 100% sure about the function of a file there-in. Deleting something just to clear Memory may have lead to 'bad' results..

  • [Urgent]How can I write to physical memory by using LabVIEW 8.2??

    Hi everybody,
    I am dealing with a project related to micro-EDM. We feed the gap voltage back to a NI DAQ card (not quite sure about the series number, might not be important to this problem), and we want to use this voltage to determine the command position of the motor, which is controlled by a Delta Tau PMAC motion controller. Now the problem is, the NI DAQ card and Delta Tau PMAC controller cannot communicate directly with each other. Therefore, we want the LabVIEW to write the value of voltage to a certain physical memory address, and then let the PMAC controller read that address. Is this feasible by using LabVIEW and NI-DAQ card? Which block or library in LabVIEW shall I use to achieve that? Or is there any alternative way to do it? Thanks a million!
    I have to get this done by the end of this week....if you know how to do it, please let me know. I really appreciate it! You are my lifesavor! 
    Regards,
    Xiaofei

    Duplicate post: http://forums.ni.com/ni/board/message?board.id=170&thread.id=289539&jump=true
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for