How to rename files from 2 bodies

I've got about 4K files shot with two different D200 bodies and need a way to re-name the RAW files without overwriting any duplicates. Nikon doesn't show serial numbers in EXIF data and one body had one dedicated lens for the entire time, so I should be able to filter for all images shot with that lens. But what then? My re-namimg scheme is to use YYYY_MMDD_original file number generated by camera. However, there were a handful of times I pulled the card from camera A and used it for some shots in camera B. Apparently the original file numbers continued in sequence (?) although I was anticipating the camera-specific numbers to be used.
I hope I've explained this well enough. Before I rename and make a complete mess, can anyone offer a suggestion?
TIA

I'd like to hear ideas on this too. Particularly if any of the sequence number settings like "image #" or "total #" can be used to good effect in this case.
For now, I simply rename on import with a sequence number. When the filenames collide LR appends a "-1" to the 2nd import. After they're all in the folder I make sure I've sorted by capture time and then do another rename pass to get them all sequenced the way I want them in the folder.
It would be nice to do this in one pass, without having to put, say, the camera serial in the file name.

Similar Messages

In lr4 where/how to rename files if loaded from folder already on hard drive?

Files imported from a card reader can be renamed upon import but where/how to rename files added from a folder already on the hard drive? Also, how to rename files so as to not have gaps in the number sequence once the "rejects" have been deleted? Thanks.

Yes and yes. And, using it with the new shoot name renamed the files perfectly!
There is even a "original number suffix" so if you don't like IMG_4501 and prefer DSC_4501 you can pull the 4501 (the suffix) and replace the first three characters.
So, in one operation SFO-shoot-(IMG_4501).NEF could become Wine-country-shoot-(IMG_4501).NEF or even Wine-country-shoot-(4501).NEF if you prefer. Powerful.
Thank you Rikk and Adobe! Chris R

How to restore files from Time Machine after Clean Install of Mavericks

How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

Hi Linc,
my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD. February 7th 2014 was the date of the clean install.
These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
Sigi

HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

Hi,
You might need to sign up at https://cloud.acrobat.com/ and choose 'Files' tab where you can find all the files.
Select all the files you want to remove and choose 'Delete' option.
Regards,
Anubha

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

How to copy file from application server

Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
Saurabh

Hi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
           exporting
                destination = m_destination
                source      = m_source
           importing
                return      = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
      call function 'WS_FILE_DELETE'
           exporting
                file   = m_source
           importing
                return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder.

How to download file from application server

Hi Experts,
              I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
    EXPORTING
      file_name      = lv_fil
      dir_name       = lv_dir
    IMPORTING
      file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
    MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
    EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
    REFRESH lt_data.
    lv_package_len = 0.
    DO packagesize TIMES.
      CLEAR ls_data.
      CLEAR lv_block_len.
      READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
      lv_subrc = sy-subrc.
      IF lv_block_len > 0.
        lv_package_len = lv_package_len + lv_block_len.
        APPEND ls_data TO lt_data.
      ENDIF.
      "End of file
      IF lv_subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
    IF lv_package_len > 0.
      "Put file to client
      IF lv_processed_so_far = 0.
        lv_append = ' '.
      ELSE.
        lv_append = 'X'.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize         = lv_package_len
          filename             = lv_cl_fn
          filetype             = 'BIN'
          append               = lv_append
          show_transfer_status = abap_false
        TABLES
          data_tab             = lt_data.
      lv_processed_so_far = lv_processed_so_far + lv_package_len.
      "Status display
      lv_percent = lv_processed_so_far * 100 / lv_filesize.
      lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING          "percentage = lv_percent - will make it fash
          text = lv_status.
    ENDIF.
    "End of file
    IF lv_subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

How to transfer file from application server to presentation server in background?

Hi Experts,
How to transfer file from application server to presentation server in background?
Thanks in advance
Namita

Thanks Raman and Challa,
We want to move file from application server to Shared folder, not on local machine. We checked FM which you guys have provided but those are not able to read file from application server.
We need this program to run in background so that we can use this in daily process chain.
Appreciate your inputs on this.
Thanks,
Namita

How to upload file from Application Server?

Dear Friends,
How to upload file from Application Server?
Plz. with example...
Regards,
Dharmesh

hi,
check the code for upload from application server.
tables: kna1.
types: begin of s_file,
         customer type kna1-kunnr,
         country type kna1-land1,
         name     type kna1-name1,
         region   type kna1-regio,
       end of s_file.
*--Internal tables
data: it_file type s_file occurs 0 with header line.
*-- Selection screen
selection-screen: begin of block b1 with frame title text-001.
parameter: p_file type rlgrap-filename default 'C:/customer.txt'
obligatory.
selection-screen: end of block b1.
*-- At selection screen
at selection-screen on value-request for p_file.
perform file_help using p_file.
*-- Process File
start-of-selection.
perform upload_file using p_file.
*-- write File data to o/p
end-of-selection.
perform write_data.
*&      Form file_help
form file_help using    p_p_file.
data: l_filepath type ibipparms-path.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   importing
     file_name           = l_filepath
p_p_file = l_filepath.
endform.                    " file_help
*&      Form upload_file
form upload_file using    p_p_file.
call function 'WS_UPLOAD'
   exporting
     filename                      = p_p_file
     filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
    tables
      data_tab                      = it_file
   exceptions
     conversion_error              = 1
     file_open_error               = 2
     file_read_error               = 3
     invalid_type                  = 4
     no_batch                      = 5
     unknown_error                 = 6
     invalid_table_width           = 7
     gui_refuse_filetransfer       = 8
     customer_error                = 9
     no_authority                  = 10
     others                        = 11
if sy-subrc <> 0.
    message i001.
endif.
endform.                    " upload_file
*&      Form write_data
form write_data .
loop at it_file.
    write:/ it_file-customer, it_file-country, it_file-name,
            it_file-region.
endloop.
endform.
regards,
keerthi.

How to tranfer file from between two client?

Hi, all:
I'd like to tranfer file from client A to client B. Basically, I will treat one of them is client and one of them is server, then create a server socket/socket connection, then they can conmmunicate. I know how to talk between them. However, I don't know how to trasfer file from client to server, or from server to client in the same class. I mean not two class: Server socket and client socket.
Consider the following case:
There is a function, just like MSN file transfer: transfer file from localhost to "10.4.155.8". How can I transfer file from localhost to "10.4.155.8"?
Help please.
--Paul

Hi, man:
Thanks.
I agree with you at most.
I am doing my practise project: the other MSN Messenger and more, I will include file encryption and file decryption, etc.
My point is one connection will make center server too heavy. Then I have to adapt your first means:
promote either Client A or Client B become server, leave the other guy still being client, because I know their IP address. This will free the server a lot.
BTW, I finish my code pretty much, say 70%. However, I felt tired for coding. I have my full time job in software development at daytime. I am looking one or two guy to share this project. My point is to improve the performance of the this Messenger. I feel my code maybe work fine with hundred of con-current user, maybe not, or maybe more, not sure. My email: [email protected]. (I put my name means I am searious).
Could anyone feel he/she is good at Messenger, please email me, then we can share my code with you.
Code sample for file transfer:
//For Client side
import java.io.*;
import java.net.*;
class Client
public static void main(String args[]) throws Exception
String sentence;
String host = "localhost";
int SERVER_LISTEN_PORT = 5432;
BufferedReader inFromUser = new BufferedReader(new InputStreamReader(System.in));
Socket clientSocket = null;
DataOutputStream outToServer = null;
BufferedInputStream inFromServer = null;
try
clientSocket = new Socket(host, SERVER_LISTEN_PORT);
outToServer = new DataOutputStream(clientSocket.getOutputStream());
inFromServer = new BufferedInputStream(clientSocket.getInputStream());
}catch(UnknownHostException e)
System.err.println("Don't know about host: "+host);
}catch(IOException e)
System.err.println("Couldn't get I/O for the connection to: "+host);
sentence = inFromUser.readLine();
outToServer.writeBytes(sentence + '\n');
FileOutputStream fos = new FileOutputStream("c://test.doc");
int totalDataRead;
int totalSizeWritten = 0;
int DATA_SIZE = 20480;
byte[] inData = new byte[DATA_SIZE];
System.out.println("Begin");
while ((totalDataRead = inFromServer.read(inData, 0, inData.length)) >= 0)
fos.write(inData, 0, totalDataRead);
totalSizeWritten = totalSizeWritten + totalDataRead;
System.out.println(totalSizeWritten);
System.out.println("Done");
fos.close();
clientSocket.close();
//For Client side
import java.io.*;
import java.net.*;
class Server
public static void main(String args[]) throws Exception
int SERVER_LISTEN_PORT = 5432;
String clientSentence;
ServerSocket welcomeSocket = null;
try
welcomeSocket = new ServerSocket(SERVER_LISTEN_PORT);
}catch(IOException ioe)
System.out.println("Could not listen on port: " + SERVER_LISTEN_PORT);
System.exit(1);
while(true)
Socket connectionSocket = null;
try
connectionSocket = welcomeSocket.accept();
}catch(IOException ioe)
System.err.println("Accept failed.");
System.exit(1);
BufferedReader inFromClient = new BufferedReader(new InputStreamReader(connectionSocket.getInputStream()));
BufferedOutputStream outToClient = new BufferedOutputStream(connectionSocket.getOutputStream());
System.out.println(inFromClient.readLine());
int data;
int totalSizeTransferred = 0;
int totalSizeRead;
int PACKET_SIZE = 20480;
byte[] packet = new byte[PACKET_SIZE];
System.out.println("reading file...");
FileInputStream fis = new FileInputStream("c://JVM_Profiling_Report.doc");
while ((totalSizeRead = fis.read(packet, 0, packet.length)) >= 0)
outToClient.write(packet, 0, totalSizeRead);
totalSizeTransferred = totalSizeTransferred + totalSizeRead;
System.out.println(totalSizeTransferred);
System.out.println("done reading file...");
outToClient.close();
fis.close();
My question, any good idea for creating progress bar?
Thanks.

[Urgent] How to read files from different directories?

I am new to Java Programming, I would like to know how to read files from directories other than the current one? (example as follows)
ProjectDirectory
|--MainDirectory
|--MainProgram.java
|--SupplementDirectory
|--SupplementProgram.java
|--Pictures
|--Image.gif
What should I write in the MainProgram.java so that I can use the supplementProgram.java from MainProgram and read the Image.gif file from the MainProgram.java?
Thanks

Run through the I/O tutorial here. It should get you up to speed on this sort of thing...

How to get file from server while click on link

Hi,
i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
following is the Destination url that i gave for the item.
/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
please tell me how to get file from server while click on link.

Ok I got your requirement now.
If you are getting file names from view attribute then you should not be adding destination URI property for the link.
Instead you can use OADataBoundValueViewObject API.
Try below code in your controller processRequest method:
I am assuming that you are using classic table.
Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
Regards,
Sandeep M.

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

How to backup files from other user logged in as administrator

RE: How to backup files from other user logged in as administrator AND/OR how to repair drive with "Invalid catalog PEOF"
Hello,
My MacBook Pro computer’s hard drive is not booting.
I booted with the base operating system and ran Disk utilities and I got the following messages:
    Invalid catalog PEOF
    The volume could not be verified completely.
    This disk needs to be repaired.
    Disk utility can’t repair this disk. Backup as many files as possible, reformat the disk,
    and restore your backed-up files.
The problem is that I have a couple of USERS set up on this computer, and it won’t let me backup the files of the second user. The folders are locked and I can’t access them, even though I am logged in as the administrator.
I made a boot disk on my other computer ( a MacPro Early 2008 ) desktop computer with the DiskWarrior 4.4 updater,
but it won’t boot on my MacBook Pro.
How can I backup these user files so that I can copy them back once I fix the drive?
or better yet, How can I repair the Invalid catalog PEOF on this drive?
Thank you in advance for your time!
Bill
THIS IS THE COMPUTER
================
17” MacBook Pro 2.8GHZ 4GB Ram (purchased in 2009).
Model: A1297
Running Mac OSX 10.9.5

Try using Disk Utility/Restore to copy the backup to a new location. Please note that this will reformat the destination partition which will erase all data.
Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

How to transfer files from an iMac to a PC?

I copied files (.pdf, .doc) from my iMac to a memory stick for a colleague in a charity. He has a PC and can't open them. The folder in the memory stick shows the file extension as .fpbf Please advise on how to transfer files from an iMac to a PC.

Format the memory stick as "fat" then copy the files to it.

How to rename files from 2 bodies

Similar Messages

Maybe you are looking for