How to Rename Windows Partition

I used WinClone to create a Windows partition on my Mac drive and restored a previously-saved backup of the Windows installation. Everything worked perfectly except that WinClone renamed the Windows partition "untitled" when it performed the restoration. Now that volume is "read only" and therefore cannot be renamed from the Mac desktop, not even by Root.
How does one rename the Windows partition? Thanks!

You may want to try posting in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Similar Messages

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

How to rename "Windows" for boot selection

Greetings,
I'm trying to figure out how to properly rename "Windows" for the boot selection screen. I currently have two XP Pro installs and after holding the 'Alt' key I have to choose between 'Mac Pro', 'Windows' and 'Windows'.
I thought maybe it was something in the boot.ini via Windows XP's root directory, but I think it's changed somewhere else.
Thanks for your time!

Apple didn't support RC1 or 64-bit versions. I am oppossed to putting Windows on the same disk drive as OS X, and even then, I think I'd want to put primary OS (whatever it is, linux, XP etc) on the first partition anyway.
I'd be in way over my head with tweaking a bootloader with 3rd party tool. I keep buying tools that don't work, don't support x64 or something.
Can you imagine a backup program for Vista that then says it doesn't support native disk drives? claims I have Dynamic Drives when they are in fact reported as Simple (I did play around with stripping but those are gone.
I have a hunch that no one has tested their products fully on EFI based systems, and if they have, Itanium and therefore treat Mac Pro as "server class" and maybe why their product is "confused" when it sees GPL and EFI partitions.
Leo dropped support for Java 6 and I work with one application that just doesn't seem to exist on Mac, so for once I feel freed to use hardware and software I need.... mostly... for once. Not the other way around.

HT4818 how to resize windows partition

How do you resize the windows partition in boot camp?

iF you have already created the Windows partition, you can't resize it. To do it, you have to use an app like Paragon Camptune, that will allow you to resize your Windows volume > http://www.paragon-software.com/downloads/camptune.html
The other option is to delete Windows and create the new partition with the size you want in Windows. Make a backup of your data before doing this

How to delete Windows partition

I am running Snow Leopard and currently have two partitions in my hard drive-OS X and Windows Vista(I know - bad idea). How do I delete the windows partition?

this should be done using Bootcamp Assistant. start Bootcamp assistant and it will give you an option to remove the windows partition.

How to "hide" Windows partitions?

/etc/udev/rules.d/10-local.rules
KERNEL=="sda1", ENV{UDISKS_PRESENTATION_HIDE}="1"
Unfortunately, after rebooting, Windows partition is still there (Thunar and other apps).
How do I hide it?

Do you have ntfs-3g installed? If so, remove it, as its only use is to find, mount, read from and write to Windows block devices. If you don't have ntfs-3g installed, you shouldn't be able to access the drive, even if it appears in Thunar.* I don't know why it would appear without ntfs-3g installed, though.
*This assumes that NTFS access isn't included in the kernel you're using; I don't think that feature is enabled in the vanilla kernel.

How to eliminate windows partition created with bootcamp

Instrucdtions for how to eliminate a windows partition created with bootcamp. thanks

Go back and reread and open the application you used.
though most Mac Pro owners choose to dedicate a drive to Windows.
Even Disk Utility will remove and then stretch the adjoining partiton it is best to use Boot Camp Assistant.
Best place to ask, Boot Camp forum, of course.

Failed boot camp install - how to remove windows partition?

Hi There,
After a failed boot camp install, boot camp no longer sees (or can remove) a windows partition - Disk Utility can't seem to remove it and if I use:
$ diskutil list
It shows up as partition 5 "Microsoft Reserved"
I also have a portion of free space that I can't seem to incorporate back into the main OSX partition - how do I remove the windows partition and make the drive a single OSX drive again?
Any help would be much appreciated
Cheers
Ben
- New Mac Pro
- Installing onto internal 1 TB SSD
- 10.9.3
- Windows 8.1

Just incase others have this issue, this wasn't caused by using Disk Utility (Disk Utility couldn't remove the partition anyway) it was caused by repeatedly trying to format the Boot Camp partition using the Windows installer when Windows refused to install.
The solution is an Apple tech note (I can no longer find it sorry) that sates that no other hard drives besides the internal HD and the Windows USB flash drive can be connected while installing windows.
Cheers

How to customize Windows partition icon in bootloader?

Hi, I customized my windows partition icon in OS X but bootcamp's bootloader still shows the partition with a normal disk icon.
Is there any possible way to change the icon to customized icon?
I've searched lots of information on the net, couldn't find any clue for that though.
Please let me know if you have anything about it.
Thanks.

This may help: Old Toad's Tutorial #22 - Adding a Favicon to Your Web Site.

How to get windows partition back on start up disk

I have used boot camp partition (windows) for months without any problem. I recently installed VM ware fusion. But unfortunately it did not work properly so I had to uninstall it.
Now I can no longer reboot from 'system preferences / start up disk' since the windows partition no longer appears beside OS X.
Can somebody help me?
Thanks
Phalch
NB I can still reboot windows when I restart the computer with alt key pressed.

You probably want to post your question in the Intel-based iMac discussion area instead of here in the discussion area for the much older iMac G4.

How to erase Windows partition with Boot Camp

I used Boot camp to create windowsXP partition, but windows got corrupted and I want to go back to zero by having boot camp erase the windows partition. The boot camp instruction setup guide says to open boot camp assistant, Introduction window and click on the third category " Restore the startup disk to a single volume". However, when I open Boot Camp Assistant there is no Introduction window as shown in the printed guide. Where do I find this so I can restore to a single volume again?
iMac Intel Mac OS X (10.4.8)

Try downloading the brand new Boot Camp version that Apple just posted within the past week (1.1.2 IIRC). Install the new version and it should give you the introduction screen again where you can remove the Windows partition.

Help needed: how to restore windows partition on Mac OS X

i delete my windows vista partition by accident,anyone knows how to restore it. what software i need? Thanks:)

If you deleted the partition you'll need to use BootCamp to recreate the partition.

How do I rename windows in the startup screen (boot screen)

Hi
I have just replaced my HDD for a larger one and put the old one in the SuperDrive DVD bay (had a smaller one there before also)
I Cloned both the Mac side and the windows side using CCC and winclone an both seems to be cloned fine , however I do not want to erase(format) the old drive for a few weeks until 100% sure everything is working fine .
So my Question . As I have 2 HDD installed when I hit options at startup the boot screen appears with 2 Mac Partitions and 2 windows partitions ,
The Mac ones I just renamed on the mac side, ( 1TB mac and 500GB mac) and on boot screen those names show up .
but
The 2 windows bootcamp drives/partitions just are written WINDOWS , so I have no idea which is old one and which is new larger one , I have tried renaming in the same way , on my mac I have them show up on desktop and called Bootcamp 1 and Bootcamp NEW , but on the boot screen just called WINDOWS .
How can I rename one of these so both are not just named windows and have it show up on the boot/option screen ?
Thanks mark
Running mountain lion 10.8 and windows XP

settings- notifications. Edit. Choose application, then click it and choose how you want to be notice

How to hide (make invisible) folders in Boot camp windows partition

I just bought my parents a mac mini core duo and set up boot camp on it. I used FAT32 so the windows partition shows up in OSX as a volume called "NO NAME". I can also see all of the files and system directories in the volume as one would expect. I have 2 questions.
1. can I rename the "NO NAME" partition from within osx to something more like "WINDOWS" or "XP"? or am I stuck with "NO NAME"?
2. How Can I hide all of the system files and directories? I don't want other people in the house to be able to see anything on that partition except for 1 directory called "DropBox" (or something like that). This will protect the windows partition from being tampered with, and any files that need to be moved across partitions can just be placed in the "DropBox" folder.
I would appreciate any help with this.
thanks,

Do you have the "Developer" folder on the main level of your hard drive? If not, you can manually install the Developer Tools from the install disk(s) that came with your iBook.
I would be more than just a little worried about using the Terminal and command line codes to start hiding files & folders on your Mac if you're not already familiar with those tools.
-Doug

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to Rename Windows Partition

Similar Messages

Maybe you are looking for