How to render faster when working on project

how to render faster when working on project in motion 5? Working on a project gets very slow when a lot of elements are going such as 3D

In the Render menu, top right of the Canvas pane, you can turn off all the render settings not in use, such as lighting, shadows, etc. Also, set the resolution and quality in that menu down lower.
When you're ready to export, you can re-set those settings to how you want it to export.

Similar Messages

How to render or output a multicamera project

I am thankful for the previous help and now I have the multicamera project almost done. I used multicamera window and went through 1 hour of film shot from two cameras. It went into sequence 002 and then I put video transitions between each clip. It plays fine in the project window. I don't know what to do next. I tried export - media and that brought up a window with a preview and output preview and choices of dvd. I left it on ntsc dvd and click export it put a 1 meg file on the computer, project file or something. It takes about a second to do that. I tried rendering workspace and rendering time line and that takes way longer but results in 130 separate files on the hard drive. I don't know what to do with them. One time early when I was playing with this with a single video file I had adobe encoder come up, but I can't find that anywhere now. I don't understand how to get this video with the transitions rendered out to an avi file. Thanks for helping, I have a book coming from Amazon on how to use this, not here yet. I find the adobe pdf help file, not so helpful. Doug

What version are you using Doug?
If CS4, you file>export>media and it opens up the dialog you mention. Then choose the one you want. This will in turn launch the Adobe Media Encoder which will actually do the rendering. Note where the output directory is. From there, you should be good to go.

Internal error cant render database when working on lettering

hello; i just installed fireworks CS5 (CS5 Web Premium) i was working with a font, i wanted it to be outlined in yellow, so i cliked the color for the outline, and i get this error: internal error, cant render database, so i click ok, it comes right back, and will not quit, cant exit program, so did task mgr to end program, but it just keeps coming back if i try to built the words i want outlined, is there a fix for this? Can i uninstall just fireworks, and reinstall to fix it? i would rather not uninstall the suite, there must be a way to fix this. i seem to be able to do other stuff with jpg's with no problems, it is just with any lettering.
thank you for any help

check if the user has the rights to start or stop the database services in the new domain. it could be a privelege issue within NT.

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

Is this problem only occurring with the project you copied from an external drive, or with any FCP project?
For example, if you were to create a new project, do you still have this problem?
In FCP, if you go to the menu FInal Cut Pro > System Settings and look at the Scratch Disks Tab, is it set where you expect it to be? Have you tried switching the scratch disk to a different disk?
MtD

When using imovie for Ipad, how can I fast forward a project to cut the length down?

When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

How to render/export fast in Adobe After Effects CC

Hi,
How can I export and render fast in Adobe After Effects, I bought a new PC but it's not quick enough in my opinion.
I want to export a 1920*1080 60FPS project, 10 seconds long. It takes a very long time.
I have already set my GPU as processor but if I start the render and look at my GPU usage, After Effects won't use it.
Screenshots of my project and settings:
Project - https://snapr.pw/i/b18473e4cc.png
Momory - https://snapr.pw/i/e92cb228a9.png
Cache - https://snapr.pw/i/30addc6d0c.png
GPU - https://snapr.pw/i/2b36b10748.png
Computer system: popoqwerty - Profiel - Tweakers
CPU - Intel Core i7- 8520K six-core
GPU - Asus GTX 780 OC 6GB STRIX
MOBO - Asus X99-A
RAM - 16GB Crucial
SSD - Samsung SSD PRO 850
HDD - WD Black 2TB

> How can I export and render fast in Adobe After Effects,
See this page for resources about making After Effects work faster: http://adobe.ly/eV2zE7
> I have already set my GPU as processor but if I start the render and look at my GPU usage, After Effects won't use it.
After Effects uses the GPU for almost nothing. See this page for details of GPU features in After Effects:
GPU (CUDA, OpenGL) features in After Effects
> A ''verry long time'' is 10 minutes for a 10 second video.
10 minutes is not a long time for a 10-second movie with visual effects, compositing, 3D, or many other kinds of computationally intensive processing. Often, people leave 30-second movies overnight or over the weekend to render. This is true for all aoftware that does this kind of work, not just After Effects.

TS1165 When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work.

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

How do I stop AE from changing my workspace when loading a project?

How do I stop AE from changing my workspace when loading a project? I've looked everywhere and can't find it. I work on a lot of projects that a peer works on and his screen size is smaller and his workspace is different than mine. Is there a setting I can change so that when I open one of his projects my AE window doesn't change?

No. That behavior is intended. The problem is probably that your colleague uses the "Standard" workspace in a custom configuration and since it is matched by name, it emsses up your "Standard" workspace as well. Therefore advise your colleague to create his own workspace with a custom name and/or create your own custom workspace to be able to more quickly reset things.
Mylenium

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned mo

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...plz......suggestions/recommendations/condemnations........

Another update to my burning problem...in my movies folder there is an img file (states it is a classic disk image-2.82GB) after I have tried burning a DVD unsuccessfully and when I open the img file I see 1) AUDIO_TS AND 2) VIDEO_TS files. I 'control' clicked the file and tried burning this folder onto a disc. Result it seemed to burn both files onto DVD but still couldn't view video.

My macbook suddenly shut down, and when rebooted, imovie project was completely gone. No record of it at all. Have been working on it for days, and it has always been there. Any way to restore it? Thanks.

My macbook suddenly shut down, and when rebooted, imovie project was completely gone. No record of it at all. Have been working on it for days, and it has always been there. Other projects are still there. Any way to restore it? Thanks.

I figured it out!!!
Hey guys! Here's what I did that saved my project.
-SHORT VERSION-
Use the Finder window on your Mac to copy and paste your old project (the one not showing up in imovie) to a new folder so that iMovie will see it.
-LONG VERSION-
CONDITIONS:
The project has to exist on your hard drive. To see if it's hiding around somewhere go to:
Home (your name)>Movies>iMovie Library (right click and select Show Package Contents)
In the iMovie Library folder (the default is usually the date) open it to see if your Project is inside. If it is, you are in luck!
RESTORING PROJECT:
Open iMovie
start a new folder under the iMovie Library (again, the default is usually todays date)
Close iMovie
In the finder window (as explained above in the CONDITIONS section) select the files and folders of your project and copy them (in my case these consist of folders called Analysis Files, Original Media, "MYPROJECT", Render Files, Shared Items)
There should now be a folder with today's date in that Show Package Contents folder.
Paste a copy of your project;s files into this folder.
When it is done copying, open up the "Original Media" folder and all of your images and clips should be present.
reopen iMovie. Your project should show up in the Libraries list.
*If your full project isn't showing in the iMovie timeline (mine just had empty bubbles where all my clips and audio should be) try dragging and dropping the clips and images from the project's "Original Media" folder into the import section of your project. Once the files were reimported, iMovie recognized them all and put them back in the correct place for me.
Hope this helps someone!

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

Aperature crashed after 3.3 update. I am a novice at best when working with restore functions. Any suggestions on how to fix this problem?

I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.

There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update

How to render faster when working on project

Similar Messages

Maybe you are looking for