How to render mp4 video with 4 audio channels?

Hi Aineaine,
Welcome to Adobe Forums.
Please refer to the below article for multi channel audio.
http://helpx.adobe.com/premiere-pro/using/clips-channels-tracks.html
Thanks

Similar Messages

How to link video and audio channels of multiple clips

Importing iMovie08 sequence via XML ends up with unlinked video and audio channel (only one of the stereo channels; see other post).
It is possible to link each clips audio and video track individualy.
Is there a way to do it in batch mode for all the clips in de timeline??

Dennis Connors wrote:
1. After selecting the in points on main audio and one of two video tracks, the "merge clips" is greyed. Yes,in case you're wondering, the audio is on the HD.
Your use of language is confusing me I'm afraid. You opened the AIFF file and set an IN then opened a QuickTime movie and set and IN and then with them both selected in the Browser (and the Browser the active window) that you cannot select Modify->Merge Clips... ?
I wasn't wondering anything about your audio, but now I'm wondering "What does 'the audio is on the HD' mean?"
2. The other issue is that the starting point is silent, so the only I know how to find the actual beginning is by counting frames back from the first sound. Is that what I have to do? Is would seem to me that there must be a "marker" that's not and "in" or "out" that will allow me to merge the tracks. No?
If you set an IN point in two clips you can merge them using the Merge Clips... command with the in points option. The IN points you choose can be anywhere and for anything. They can be where the clapper hits and sounds, they can be where a drum stick hits a cymbal, they can be where someone is clapping, they can be where a body falls from a building onto the sidewalk... Anything that helps you sync the sound with picture.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How do I get Video and Audio Chats with PCs ?: FAQ 3

How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
Ralph

Hi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How do I select just one audio channel in Final Cut Pro X?

I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net.
And the FCPX "Help" feature just ****** me off....
I recorded voice on channel 2 and shotgun nat.sound on channel 1.
I only want the voice track (channel 2) to playback in stereo.
I have already edited the video so I don't want to re-import the raw video to seperate out just the channel 2 voice track.
How do I select just one audio channel in the timeline, then pan it so it plays back in both the L and R channel?
Also, some of the audio was recorded with a air conditioner running in the background. Any suggestions on best audio filers to remove or lessen it?
Thanks, Barry

I think you want to select the clip in the Timeline, choose the Inspector and then Audio, dual mono.
You can even do this by selecting multiple clips.
In the Event Browser as well.

How to read mp4 video

Hello
I am start working with Labview 8.20 to do a project which have to contain some videos. I already have searched in this forum some information/code examples how to play mp4 videos (or other well-know formats like avi, mpeg...), but I didn't find nothing that I think it would help me.
Could someone give me some help or example codes that I can use?
Thanks
Daniela

Hi!
I've been awhile without working with LabView, but I've seen the link provided and found then a page that I thought it was what I was looking for. ..
However, I copied this code (which can be seen in annex) and place a sample video, but not getting results. Could be by incompatible versions of LabView? I'm using version 8.20.
I apologize if my question is basic, but as I had said, I started working with these types of programs recently and so I don't know much about it!
Thanks
Daniela
Attachments:
code.pdf ‏117 KB

Trying to figure out how to use a video's alpha channel to define its hitspace for a button

Hello, I'm trying to figure out how to use a video's alpha channel to define its hitspace for a button. I would greatly appreciate anyone's help with this.

Currently I'm doing an image sequence inside of a movie, and putting the movie in the button. I hope that's what you're asking. Not sure if I entirely understand your question. (Been a little while since I used the interactive side of Flash)
Anyway if you have a specific process that you personally do that works I'd happily conform to your solution.

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Aligning Video with Audio

I am attempting to align video with audio of a clip from another camera. Is there an incremental way of aligning. At the moment when I move the video clip on the timeline it is not fine enough to to align.

select the clip in the timeline then nudge it left and right using the trim keys, the comma and period keys, to nudge left and right by one frame at a time (the square brackets also do the same). if you hold down the shift key at the same time you'll get a multi-frame nudge ... the number of frames depends on your "multi-frame trim size" setting in your Final Cut Pro > User Preferences --> Editing tab
of course, you can only nudge the clip if there is no other clip in the way, otherwise you will just get a "clip collision" ... if that is the case then you'll need to "slip" or "slide" the clip in place. exactly the same procedure/keystrokes as before, but you just need to select the slip or slide tool before you start pressing those trim keys.
cheers
Andy

Program to remove sound from video and join video with audio file?

With which program can I remove the sound of a video and join/sync the video file with another audio file?
Thank you

Can I suggest using something that will allow audio capture from the external mic. to start with. Then you will have a video with audio in sync, in a format that you can re encode into whatever format you wish.
But, if you must do that. Dump the video from the handycam file, then put the mics audio file with it. ffmpeg -i video ffmpeg -i audio into whatever container and codecs that you want. You may have to adjust audio-video sync
ffmpeg -i audio -itsoffset 0.1 -i video
Search this forum and the web. There are hundreds of ffmpeg examples. And the ffmpeg man
https://ffmpeg.org/ffmpeg.html
ffmpeg will do just about anything, but is a little daunting. Ask specific questions and you'll get specific answers. Or find a front end for it. I never use them.

Import video with audio question

When I start a new project and import a video with audio, then drag to the timeline , it puts the latter on audio 4 track instead of track 1. Why is it skipping 3 tracks?

. Thanks Bill. It was a mono track and the 3 above were stereo. I deleted the 3 empty tracks and now it is below the video directly. What I am also wondering about is why the video track can be widened vertically,by dragging the bottom border and the previous audio 1 track could be also, but this one can not. Is it not possible to see the waveform as I can when I imported an audio file in a different project? That one was expandable veritically.There was no video in that one.

How to render mp4 video with 4 audio channels?

Similar Messages

Maybe you are looking for