How to render special characters (math symbols) in report column headers

I want to enter the following characters in a report column heading: ng &frasl; μl
In text items they render correctly when I use the following codes:
ng &frasl; μlbut in column headings they render as
Ng / Ml
Anyone know a fix?
thanks in advance
PaulP

Paul,
I used it in my Report i don't see any problem, you might want to check it again
i have seen using Μ gives 'M'.
so make sure you are using lowercase 'm'
another solution: use this "ng / µl" directly on to the column or to the header it works,
if you get anything like this "¿", then copy the "µ" symbol from Microsoft Word and paste it, i did the same :p.
Thanks
Kumar

Similar Messages

How to display special characters in APEX Classic Report column

Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21

876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
<span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

How to display special characters in Script...

hi all,
Can any one tell me how to display special characters in script...
how to write in text element
thanks in advance,
prashant

Hi Prashant ,
What special characters would you like to include .
There are a set of characters / icons /symbols that can be included in Script , for that open a window in edit mode and in the menu there will be an option called Insert , here you can find a lot of characters/symbols that can be included .
Regards,
Arun

How to print Special Characters in Sap-Scripts

How to print Special Characters in Sap-Scripts
Thanks,
Ravi

Hi
if u want print special characters we can use hot codes i.e ' ' (single inverted commas). in between these hot codes insert u r special characters.
write ' !@#$%^&*( ) '.
for the above write statement output is
output is !@#$%^&*( )

How to write special characters in PDF using iText

How to write special characters encoded with UTF-8 in PDF using iText.
Regards,
Pandharinath.

I don't know what your problem is but that's almost certainly the wrong question to ask about it. Java (including iText) uses only Unicode characters. (You may consider some of them to be "special" if you like but Unicode doesn't.) And when it does that, they aren't encoded in UTF-8 or any other encoding.
So can you describe your problem? That question doesn't make sense.

How to remove special characters while typing data in edit cell in datagrid in flex4

Hi Friends,
I am facing this problem "how to remove special characters while typing data in edit cell in datagrid in flex4".If know anyone please help in this
Thanks,
Anderson.

Removes any characters from
@myString that do not meet the
provided criteria.
CREATE FUNCTION dbo.GetCharacters(@myString varchar(500), @validChars varchar(100))
RETURNS varchar(500) AS
BEGIN
While @myString like '%[^' + @validChars + ']%'
Select @myString = replace(@myString,substring(@myString,patindex('%[^' + @validChars + ']%',@myString),1),'')
Return @myString
END
Go
Declare @testStr varchar(1000),
@i int
Set @i = 1
while @i < 255
Select
@TestStr = isnull(@TestStr,'') + isnull(char(@i),''),
@i = @i + 1
Select @TestStr
Select dbo.GetCharacters(@TestStr,'a-z')
Select dbo.GetCharacters(@TestStr,'0-9')
Select dbo.GetCharacters(@TestStr,'0-9a-z')
Select dbo.GetCharacters(@TestStr,'02468bferlki')
perfect soluction

How to Print the Report Column headers on each page of any report

Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
Ric

Hello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie.

How to add special characters in Flash CS3

Hi, i need the help of some flash guru… these last weeks we were working with cloversites.com to build a community website… the interface is awesome etc etc however we in Malta have eight special characters (GCZ with a dot on top of them and an H with a second strikethrough). Those at cloversites wrestled with the problem, they could see the characters on their computers but when they entered the text in the site, flash couldn't render the special characters. Here is their message:
I am extremely sorry about this, but we were unable to add in your characters. We attempted to add them into our software but they did not work. We worked on it all morning and realized that we need an extra add-on for our keyboards. Adding special characters is nothing new to us and have answered this request for many of our international users. For some reason, the Maltese characters did not work in our sites. For example, our "option-G" is the copyright symbol so it will need to be transferred over to international characters.
Unfortunately, we thing that this has to do with Adobe Flash CS3. The software allowed me to embed the characters, but we were unable to render them on the web. Which led us to think it had to do with the version Adobe is running and its inability to render the text through its software on the web. None of the characters worked on the web, and it looks like its just an Adobe bug. So we are able to type and use the Maltese characters, but Adobe Flash is having trouble with them.
Does anybody know of any possible solution?

see if codepoints-to-string() is suitable for you ..
Re: how to concatenate hexadecimal value to string in XQuery in PS Message Flow

How to show Special Characters like (∠) in an Embedded text field

I want to show some special characters like (∠). It is working fine if we don't embed the text field. But I want to use superscript and subscript font, so I have to embed that dynamic text field. When I embedd the texfield it does not show me the (∠) symbol. Instead it shows me a square symbol. Please let me know how can I solve this problem. My project is nearly finish except for this part.
Thanks in advance
Salim

Yes, I know we need to include the symbols. But I am unable to include it. Whenever I click on embed option and paste the symbol (∠) in the include these characters box, it appears as a square symbol. This is driving me nuts.
I even tried to embed All (54665 glyphs). But this is not working either.
Has anyone faced this problem before?

Problem in reading special characters � Microsoft symbols.

Hi All,
I have a text field where user can enter some string and search. Unusually/unfortunately users can copy/paste text from ms-word file and search for that entry in the database. Here they can even copy ms-word special symbols such as ellipsis (�), em dash(�), en dash(�). Since database has such (special character) entries we cannot restrict them from doing this (after all that is the requirement).
Now the problem is when I read the text value in servlet/jsp I find that those special characters are replaced by question marks(?). Because of this database return �no rows found� though there are entries.
What I have observed is when I read the ASCII value � (int)char I am able to get proper value. Using that I am having if else block to replace the question marks with proper symbols. But is there a direct way to do this? I even tried converting the string to another character set type string. But no luck.
(Also when I print the text value to a JSP, I can see proper vales through Internet Browser.)
Below is the sample program(read_n_print.jsp), sysout prints question marks in console, but JSP/HTML shows proper value in browser.
<html>
<%
     String value = request.getParameter("special_text");
     System.out.println("value " + value);
     if(value != null){
          byte[] bytes= value.getBytes();
          try {
               String output = new String(bytes,"ISO-8859-1");
               System.out.println("output " + output);
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
%>
<head>
<title>Insert title here</title>
</head>
<body>
<form method="post" action="./read_n_print.jsp">
<input type="text" name="special_text" value=""> <input type="submit" value="Go" > <br>
<font size="8">Value entered is <%= value %></font>
</form>
</body>
</html>

Hi DrClap,
Thanks for your reply.
That article was helpful in understanding character conversions. And it works fine for JSPs.
But when I tried to apply the same in JSF it does not work. May be this is not the right forum to dicuss JSF related things. But if you know how pageEncoding and contentType can be mentioned in JSF. I am using myfaces and I have tried <h:form id="SearchForm" acceptCharset="UTF-8" accept="text/html;charset=UTF-8">. Didnt work....

How to remove special characters in xml

Dear friends,
How to remove the special character from the xml. I am placing the xml file and fetching through file adapter.
The problem is when there is any special character in xml. i am not able to pass to target system smoothly.
Customer asking schedule the file adapter in order to do that the source xml should not have any special charatcters
How to acheive this friends,
Thanx in advance.
Take care

Hi Karthik,
Go throgh the following links how to handle special character
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Restricting special characters in XML within XI..
Regards
Goli Sridhar

How to handle special characters in Apex

Hi ,
In my application I have two regions - one is Report Region (Interactive Report) and other one is HTML region with two text items - Empno and name
My Report has two columns Empno(varchar2) and Ename(varchar2).
When I click the edit link in the report column, the empno should have a read only EMPNO value and ename is a text field with ENAME value.
When I run my application I have encountered the following problems :
1. if my empno has special characters like ' # ', the characters after that is not getting displayed
2. if my empno has special characters like ',' - the characters after comma is treated as a next texitem value
Here is my credential ,
Workspace CTSAN_ORACLE_DB
Username [email protected]
Password lakshmi321
URL : http://apex.oracle.com/pls/apex/f?p=9444:19:4292839314890159:::::
Plz. suggest me how to rectify the above problems.
Thanks,
Anoo..
Edited by: Anoo on Aug 13, 2010 3:05 AM

Don't pass data values in URLs. Whilst it is possible to escape values to make them URL- and APEX parameter-safe, it is much better practice to avoid the problem altogether.
Create a surrogate primary key on the table that is an immutable discrete numeric identifier and only use this as a URL parameter. In target pages/regions, use this PK value to retrieve the required data from the table.

How to preserve special characters in dynamic textfield for text comparison?

The problem is as follows:
Since I mostly develop for multiple languages I am forced to have dynamic textfields in my buttons which contain three lines (to account for the differnt text.lengths in different languages).
I then populate the textfields with strings out of an array or xml and use the textfields contents later in my button class to execute different code depending on the textfields content.
This works fine as long as I don`t use any special characters, like for example "\n".
var labels:Array = ["\nLABEL1","LABEL\n\n2"];
switch (e.currentTarget.txt.text)
                case labels[0]:
                    doSomething();
                    break;
                case labels[1]:
                    doSomethingElse();
                    break;
shows the right thing in the button label (breaks the text were I want it)
but stops to work
(with htmlText & <br> its the same)
my workaround for the moment is to use filler spaces,
var labels:Array = ["                   LABEL1","LABEL                                                                        2"];
but that`s obviously ugly to setUp and requires a lot of trial/error to get it right for all languages.
Any ideas how to bypass that?

Bad habits die hard ;-)
Weird enough spelling the problem out and getting this response from you cleared my head and I finally got an easy solution.
I simply attach a dynamic property to the movieclip, copy the array contents into them and instead of using the text-property for comparison I compare the MovieClips fresh created spectext property.
Voila: Now I can be lazy without too much of a bad conscience.

How to Handle Special Characters in PI7.1

Hi Team,
I need to handle some special characters like <,>,& etc.. from WS Adapter to CRM in PI 7.1.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9420 [original link is broken]
By using the above blog i had implemented the Java Code as
public void execute(InputStream in, OutputStream out){
try{
int read_data;
while((read_data = in.read()) != -1){
if (read_data == '&'){
out.write("&".getBytes());
}else if (read_data == '>'){
out.write(">".getBytes());
}else if (read_data == '<'){
out.write("<".getBytes());
}else if (read_data == '/'){
out.write("&frasl;".getBytes());
}else if (read_data == '\''){
out.write("'".getBytes());
else { out.write(read_data);
out.flush();
} catch (Exception e){}
I had added this class file in Operational Mapping.
It is working if we have only one IF condition for & in while
Any suggestion
Thanks
Sriram

Hi Ramesh,
Thanks for your inputs, I have tried your code but it is not working. The error message stays the same.
Dear Stephane,
To describe the error more, the requirement is the payload coming from source through WS Adapter consists of the special characters <, > , & which are basic sematics of XML syntax. I need PI to process this payload with special characters and successfully transfer it to target CRM system. I have created the Java class with code (ref: Blog 9420) as stated earlier and added this class to my existing Operation Mapping. I am expecting the java mapping to replace the special characters in payload like < with ">" . So as the case with the other characters >,&,'
After activaton of my operation mapping, I triggered the test message with Soap UI client and I could able to get a successful mapping only When I put the logic for &ampersand symbol only. However when I am trying to add the logic for > or < or ' the mapping is failing . I am using UTF-8 encoding across the source and PI enviroments.
Sample SOAP message :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:abcabca.com">
   <soapenv:Header/>
   <soapenv:Body>
      <urn:MT_ABCDEFG_Req>
     <activity>
          <id/>
          <type>ZEMA</type>
          <actionType>C</actionType>
          <firewall>10000003</firewall>
          <subject>small > < attachment test</subject>
          <location/>
          <startDate>2010-07-08T10:53:31.000Z</startDate>
          <endDate>2010-07-08T10:53:31.000Z</endDate>
          <mainClient>1000319</mainClient>
          <mainContact>1000003</mainContact>
          <isConfidential>false</isConfidential>
          <summary/>
          <fullText>test body - small.txt</fullText>
          <owner>1000021</owner>
          <from>ABCDEDF</from>
          <sendTo>emailaddress</sendTo>
          <copyTo/>
          <keywords/>
          <referenceId/>
          <createdBy>1000021</createdBy>
          <additionalContacts/>
          <additionalClients/>
          <additionalParticipants/>
          <status>A0008</status>
          <attachments>
               <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
               <fileName>small.txt</fileName>
          </attachments>
          <attachments>
               <fileUrl>20100708110053-XXXXXXXXX</fileUrl>
               <fileName>EMail 2010-07-08.pdf</fileName>
          </attachments>
     </activity>
      </urn:MT_ABCDEFG_Req>
   </soapenv:Body>
</soapenv:Envelope>
Output on the SOAP UI client for the above request:

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1160)
     at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(
What do you think where I am doing the wrong?
Sriram

How to Avoid Special Characters in string

Hai.
I want only Alphabets & Digits to be entered in to my string.No any other special characters except spaces.How can I do this?
Solved!
Go to Solution.

MikeS81 wrote:
see the attached example.
I would allow a few more, e.g. 0 and 8 to allow editing of the entered string (backspace, cursor buttons, delete key, etc.).
Message Edited by altenbach on 11-21-2008 12:49 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
check_char_LV80MOD.vi ‏14 KB
FilterStringInput.gif ‏6 KB

How to render special characters (math symbols) in report column headers

Similar Messages

Maybe you are looking for