How to reopen previously saved reports?

Hello,
is it possible to reopen previously saved test reports in Teststand, in order to run only the previously failed tests on a UUT?
I appreciate any help.
Cheers,
Stephan

Hi Stephan,
New to TestStand 3.5, the Message Pop Up Step type allows you to
display images and webpages. Simply right click on a message pop up
step and select "Edit Message Settings", then go to the "Options" tab.
At the bottom there are settings for "Display Image or Web Page". You
could select your previous generated reports and display them to the
operator.
Hope this helps Stephan, have a good one!
Dan Weiland
Applications Engineer
National Instruments
www.ni.com/support
Dan Weiland

Similar Messages

  • Extra Field gone after reopening a saved Report

    Hi all,
    Maybe it is a stupid question but when i have builded a report with the wizzard and i add a extra Field and i save the report as a rdf. The next time i open the saved report the extra Field is gone.
    Does anybody know why?
    Thanks in advance,
    Daniel

    The Fields are present at the object navigator. But i know what the problem is(i guess); sometimes i saved the report with the added fields and after that i try to run the report and suddenly the Reports Builders exits.. normally i restart the Reports Builder and then i am lost the Fields although i saved the reports before.
    What i did is:
    - create the fields manually
    - saved the report
    - exit reports builder
    - start reports builder
    - opened the saved report
    and the fields are still there(in the object navigator and in the paper report) ;-) !
    Thanks for your support,
    Daniel

  • How to open my saved report view in portal?

    Hi experts,
    When I opened a BI report on portal, I adjusted the the drilldown and saved a view using the toolbar on the top. but I can't find how to open the view, I can't find it anywhere.

    Saved Views cannot be accessed from Portal directly ... you would have to do a work around to achieve the same..
    something that worked well for me in my project(s)
    /people/arun.varadarajan/blog/2009/02/08/expose-saved-views-on-web

  • HT5429 how do I clear previously saved address searches in maps

    I want to clean up my Maps app and cant seem to figure out how to clear previously saved addresses. I hit clear but they are still there.

    Thanks for your reply!
    Yes! I already turn off the autofill. But the list still come out when I typing in the search bar.
    Kenny
    Hi Kenny,
    Re: Turning off autofill in the
    address field...
    The alternative to that is to clear your history and
    clean up your bookmarks to remove any entries that
    you no longer use (Safari uses both to check for url
    autofill items).

  • How to Reopen the SD period

    Hi All
    Sales order was created on 2008 and user is trying to change the sales order on 2010. We are unable to change the sales order and we are getting the below error log details.
    Error Log
    1. Posting in fiscal year 2010 is not possible; in FM open doc. 52012 in fiscal year 2008.
    It is not possible to change document 52012 in fiscal year2010 because the document was updated as open commitment in fiscal year2008 in funds management.
    2. It is not possible to change document 52012 in fiscal year 2010 because the document was updated as open commitment in fiscal year 2008 in funds management.
    The posting is not carried out.
    Carry document 52012 forward to fiscal year 2010 using program: Closing operations: Carry forward of open items(RFFMCCF1).
    Note: We have executed the standard report (RFFMCCF1) and found that there is no open item for fiscal year 2008 & 2009.
    Please help us to resolve this issue and clarify the below points.
    1. is it possible to carry forward the two year before created sales order into current year.
    2. how to reopen previous two years period in SD.
    3. is it possible to create the billing document in SD.
    Regards
    K.Gunasekar

    hi,
    hope this is help ful
    1. Is it possible to carry forward the two year before created sales order into current year.
    This is possible to go two years back ward but let explain you the impact by doing this.
    First of all your company code will behave crazily after doing this. Here crazily means posting in different posting periods and it cannot give proper function of company code since then because you will touching most important part of enterprise structure called plant.
    There are notes on the same please go thru the SAP NOTES.
    This is not possible because itu2019s already two years forward.
    2. How to reopen previous two years period in SD.
    You are not opening SD periods here you are posting the transaction right so it has to go through company code only for that user MMPV and MMRV
    3. Is it possible to create the billing document in SD.
    This is possible if the above two is possible.
    So please be ware of this.
    Regards,
    Balajia.

  • HOw do i revert to a previously saved version of a document?

    How do i revert to a previously saved version of a document? I have no idea how, but i closed and saved a document and the whole thing when reopened was blank (all 26 pages) apart from the last 4 pages id just added b4 saving. How do i get it back? Matter of life or death as hand in is tomorrow. thanks

    Have you backed up the document? For example, by using Time Machine. If you have then just need to restore the document from an earlier date (ie the latest date before 26 pages were deleted).
    If you haven't backed up the document then you're in trouble. The File > Revert to Saved menu command only undoes changes you made since the last time you saved your document.  As you saved the document with the 26 pages missing, choosing Revert will not get the 26 pages back.

  • How can I open a Numbers file to the last cell used on from the previous saving of that file?

    In Excel, the .xls file would always open on the the cell location where the file was previously saved.  Very nice to have feature when the file is long ,so one does not have to keep scrolling down the page to make the next entry every time the file is opened.
    Can Numbers do this?  I can't find an option for it.
    After opening a file, I must always scroll down to the last entry or where I want to start inputting data.  What a pain.
    Is there a way to open a numbers file to where one was located when it was previously saved?
    Anybody know?  Please help.
    Thanks

    CF,
    When I Save a Numbers document with a cell Selected and then close the document, the same cell is still selected when I reopen the document. Isn't that what you are asking for? Furthermore, if I have chosen 100% zoom scale, the selected cell is displayed in the same screen position as when it was last saved. What you may be seeing that you don't care for is that if the zoom is other than 100% the table's position in the display window may be different than at the last Save.
    Jerry

  • How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

    How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

    Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

  • How can I revert to a previous saved file?

    Hi,
    I have been working on Word for Mac 2011 and have been saving continuously onto the same document as my work progresses. I always reference manually and somebody suggested I use footnotes to reference. This was too problematic as I needed to reference separately
    at the end of three sections and footnotes was only allowing me one lot of references. So I copied and pasted my other two sections underneath the footnote referencing  and Word must have assumed it was part of the footnotes because when I completed my
    work and went back to re-reference each section manually and delete the old footnote references, I lost all my work done underneath the footnotes! Now, I hear you can "revert to previous saved file" or some other such thing  to go back to a
    previous save of the same document. Any help is greatly appreciated on how to do this!!
    Thanks,
    Ayema

    If you haven't saved the document, pressing Command+Z will undo the paste.
    If you have already saved the file then hopefully you have the option set in preferences to Always Create a Backup and in the folder where the original file is locate you will find a file name "Backup of..." the file name you are working on. This
    will be a how the file looked prior to the last save.
    If you don't have the Always Create a Backup option set, besides "Shame on You" then go to your Time Machine backup which should be no more than 1-hour old and you can get previous hours... assuming you have that function enable. If you don't then
    again... Shame on You!
    If you have neither of these built-in options set then I pray you are using my
    GotUrBack application running, which will protect you with up to 9 levels of backup of your saved version of the file.
    http://www.greatcirclelearning.com/zapps-got-ur-back
    And if you don't have any of the above set or running then I'm sorry to have to say... you are out of luck and have a great deal of file recreation to do.
    Kind Regards, Rich ... http://greatcirclelearning.com

  • How do I  undo an update to pages 2.1 on an iPad 2? I can no longer open a document previously saved, even when I try to open it in the iCloud and on my Mac.

    How do I  undo an update to pages 2.1 on an iPad 2? I can no longer open a document previously saved, even when I try to open it in the iCloud and on my Mac.

    With IOS Pages v2.0 and v2.1, Apple introduced a new document format that is incompatible with prior Pages versions on IOS or OS X Pages ’09. Opening older documents with these recent versions of Pages will permanently prevent the document from opening in earlier versions of Pages on IOS or OS X.
    Nice of Apple to warn people.
    There is no undo of an iTunes application update, short of forcing iTunes to restore IOS v6 back on that iPad 2. Even if you did that, you won't find the IOS Pages v1.7.2 in the iTunes store now.
    IOS Pages v2+ will allow you to export content in Word .docx format. You do this by first tapping the box with an up-arrow in it (next to the left-most +). A menu will slide up — choose Send a Copy. Select a document icon. Pick Mail, and then Word. Your Pages v2.1 document will now be converted to Word .docx, and attached to an email body. Fill in the to address and send.

  • How do I delete a previously saved bookmark but I don't know what Bookmark Folder it is stored in and I didn't want to search folder by folder.

    How do I delete a previously saved (open) bookmark but I don't know what Bookmark Folder it is stored in and I didn't want to search folder by folder. I know there must be a way to delete it or find from the address (URL) window/bar but I can't seem to figure this one out.
    (Yosemite 10.10.1  Safari 8.0.2)

    Click "Bookmarks" in the Safari menu bar, then choose "Edit Bookmarks" from the drop-down.
    Go to the bottom right corner of the page that opens up.
    Enter the search terms in the search box.
    Location  of the bookmark will be shown.

  • How to stop firefox from opening new tab when opening a pdf that is previously saved on my desktop?

    PC Windows 7 Pro 32 bit
    I have previously saved PDF files on my desktop. When I open the PDF, firefox sees fit to open a new tab even though I do not have the browser open. This is annoying because after I close the PDF I then have to close the New Tab browser window as well. This costs me a lot of productivity time as I open a lot of PDF's for work. The PDF file use to show the Adobe logo on the file on desktop. Once I installed firefox it now shows the firefox logo?
    I have already set PDF's to open with Adobe as default through Menu-Options-Applications

    Hello,
    In order to change the default reader for PDF files (to not open PDF files with Firefox's internal PDF reader), follow these steps:
    #Go to ''Tools'' > ''Options'' (or ''Firefox'' > ''Options'').
    #In the Options window, select the ''Applications'' tab.
    #In the ''Search'' field, type ''PDF''. You should find ''Portable Document Format (PDF)''.
    #On the right handside you should find an ''Action'' column. Use that to select your favorite PDF reader. In order to view PDF files in Firefox, choose ''Preview in Firefox''.
    Did this fix your problems? Please report back to us!
    Thank you.

  • HT2335 My iphone 4S previously saved photos in the jpg format.  Suddenly it changed to the bmp format.  How do I change it back to jpg?

    My iphone 4S previously saved photos in the jpg format.  Suddenly it changed to the bmp format.  How do I change it back to jpg?

    Photos captured by the iPhone are saved in jpeg format. A screen capture is saved in png format.
    There is no setting to change either one to be captured/saved in a different format.

  • I just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?

    Hi,
    i just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?

    But, unless I missed something, you are doing the repair with Aperture 3.5 so if 3.5 can't open an earlier library before doing the upgrade then unless I'm missing something the library will be upgraded before the repair is run, no?
    OT:
    You got me there, Frank - I wondered about the same thing, but Aperture is behaving differently, when upgrading a library, depending on if you are launching into the First Aid Tools or not.
    I repeated my experiments, to explore this difference:
    I restored an Aperture 3.4.3 library and launched the First Aid Tools:
    Apertur went directly into First Aid Mode without first asking to upgrade.
    Then "Repair" asked to be allowed to upgrade the library as you predicted.
    During the upgrade "Aperture"showed "Rebuilding", not "Repairing" or "upgrading". 
    Second experiment: When I only double-click the 3.4.3 library instead of repairing, the upgrade alert is very different:
    It takes a shorter time and does not show "rebuilding".
    I am quite certain, that Aperture will use a different upgrade prodecure, when launched into the First Aid panel for repairing or rebuilding.

  • How can I recover a previously saved Excel 2010 workbook

    How can I recover a previously saved Excel 2010 workbook?  The I mistakenly deleted a worksheet from the version I am now using and saved that version and would like to recover the older version with the worksheet I deleted.  Thanks for any help

    Hi,
    Just checking in to see if the suggestion of Don's was helpful.
    Please let us know if you would like further assistance.
    Jaynet Zhang
    TechNet Community Support

Maybe you are looking for