How to reorder the rows in a UITableView

Hello,
I have a UITableView in my application. I want to reorder the rows of my table view on a multiple touch event. Is there any way around to do this? I have seen the touch event in the UIViewController class, but if i touches on my table view it doesn't calls the touch event rather it goes to the didselectrow event of the table view. Any suggestion how to do this?
Looking forward to hearing from you soon.
Regards,
Obaid

Gentle reminder!!!!

Similar Messages

How to reorder the rows in a table?

Is it possible to incorporate reordering feature of the SelectOrderShuttle to a table like the following picture?
http://picasaweb.google.com/lh/photo/c-UAWCac_2ySw_VQj16GEQ?feat=directlink
Thanks.

sb92075 wrote:
The order of columns within row make NO difference to performance; with possible exception of LOB datatypeThat's not strictly true.
Given a badly designed application you may find a change in column order can make a worthwhile difference to performance. The note in question is aimed specifically at Demantra, and make the following point:
<ul>
Due to the way the Oracle RDBMS stores data physically on disk, it is possible to reduce storage and improve performance by rebuilding large tables that have many NULL-value or empty columns, to the end of the row. This is known as reordering.
</ul>
This describes a classic bad design - blaming the problems on Oracle, of course.
But if you do have very long rows (especially with more than 254 columns), and you do leave vary large numbers of columns null, then rearranging the most frequently null columns to the end of the row can make a difference. I've done it a couple of times.
The OP seems to be talking about the (generally silly) guideline to rebuild the table in primary key order, though, and there is an entertaining (but apparently broken) script that gives a meaningless number that is supposed to show how badly ordered the table is with respect to the primary key. (Personally I would just look at the clustering_factor of the primary key - it's quicker, easier, and more likely to be appropriate).
Regards
Jonathan Lewis

How to increase the row height of the table in the smartform

Hi,
Can any one say,
How to increase the row height of the table in the smartform.
It is presently show the row width very small, i want to increase the row with of the table in the smartform.
Plase say how can we increase the row height in the smartform.

Hi Ravi,
In Smartforms , Select the Table and you can adjust the cell hieghts in OUTPUT OPTIONs TAB.
Reward points if that Helps.
Manish

How to Fix the row in sap script, its urgent......

Hi Experts,
first i explain my sap script, i have print void check in my script client give readymade format means box are there, lines are there. i have to fix in box and line data form database table. everthing is working fine. i got all data. i have total 6 window in my script .but i have one issue In my sap script in header window total five rows... like below
Check voucher no:8888
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
now sometime check voucher is balnk....
Check voucher no: BLANK/NULL
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
because of that all rows are move up side and all window also move up side and so script not fix to the box and line all data are seen not perfectly... so guru`s how to fix the row and window in script....
its urgent...
Waiting for ur reply
Thanks & regards
Jigar

Hi,
Follow the below steps . Definately your issue will bve resolved.
Let us suppose you are printing following fields
PH &v_text&
PH &v_text1&
PH &v_text2&
you will get the output as you expected.
and if you have any conditions for these fileds
/: if v_text is not initial.
PH &v_text&
/: endif
PH &v_text1&
PH &v_text2&
if you have data in each field then you will get output as expected .
But when v_text is initial.
the data will be moved up wnhich is happening in your case.
so what you need to do is?
/: if v_text is not initial.
PH &v_text&
/: else
PH (Here you need to mention empty line with same paragraph format
/: endif.
PH &v_text1&
PH &v_text2&
Reward points if useful
Regards,
Nageswar

How to print the row ,column,and particular cell in separate color

how to print the row ,column,and particular cell in separate color IN ALV GRID

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How to Restrict the Rows In Pivot Table

Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.

Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

How to get the row Count of a ResultSet

How to get the row Count of a ResultSet

Hi
I'v tried rennie1's way ,but I only get zero,my code is:
rs.executeQuery("select count(*) from t_test");
if (rs.next()) int rowCount=rs.getInt(1);
I also tried barni's way ,but the method rs.last() and rs.beforeFirst() throw a same Exception
I tried another way,the code is:
while rs.next(){
// Do nothing ,just move the cursour to the last row
int rowCount=rs.getRow()
However,the rowCount still equal zero
Any help would be greatly apprecite!
note:
I get connection by DataSource's JNDI name from client, the Server is Weblogic Server 6, the DBMS is Oracle.

How to obtain the row data in the component datatable?

if I want to edit a row data, and then know which row is edited in the component datatable, and how to do?
How to obtain the row data in the component datatable, and update it to database, not simplely edit a simple table
Any ideas? Thanks

Thank you very much for your help Alexander !
It's quite confusing when you leave Struts and try to adapt your projects for JSF for the first time...
I wanted to click on a row with a "onMouseClick" on the TR tag like I used to do in Struts/JSTL. But it seems to be impossible in a dataTable.
Ok then. I've added a column at the end of the row with an icon.
But eventually I didn't need to declare link parameters.
In my BackingBean I did like this :
public String selectEventForUpdate() throws IllegalAccessException, InvocationTargetException {
        PortletAgenda event = (PortletAgenda) JSFUtils.getInRequestMap("event");
        BeanUtils.copyProperties(this, event);
        return null;
   }JSFUtils.getInRequestMap(...) is a method I wrote in a util object :
public static Object getInRequestMap(String name) {
        Object res = null;
        Map requestMap=FacesContext.getCurrentInstance().getExternalContext().getRequestMap();
        if (requestMap!=null) {
            res=requestMap.get(name);
        return res;
} " event " is the name of the item in my dataTable list.
My backingBean has the same attributes as "event".
So when the page is reloaded I have a backingBean full with the selected properties to edit/update.
Thanks to your reply I realized that putting this form in the middle of the dataTable seems to be impossible.
So I put this form in a floating DIV in front of the table with a shadow.
It works :o) !
But I'm a little bit disapointed to be honest...
I used to build my web applications with Struts and JSTL and doing this kind of interface was really easy.
I've decided 3 days ago to convert into JSF because the "GUI Layer" seemed to be improved.
But now I realize that I cannot put a onMouseOver and onMouseClick on a row and I cannot display a different row in the middle of a table....
I think it's a shame because there is a facet for header and footer.
And it would be great if we could create our own personal facet that appears only if a condition is true.
For exemple " if the current item id is the same as the request parameter id then display the following facet content ....... (with a panel group and a form inside to update the row) "
It's easy to do that with JSTL thanks to c:forEach and c:if but it seems to be impossible to use JSTL tags like this during the dataTable iteration.
And JSF tags seems to have no logical tags like " if " or loops that can be nested in dataTable.
I really need to realize this interface (you click on a row then an edit form appears where you clicked).
Do I have to write a component myself that extends dataTable?
Do you know if writing such a component is hard to do for a beginner like me?
(I've juste discovered JSF 3 days ago and I've used Struts/JSTL for 2 years til now)
I'd be glad to have much advices from you about that.
Regards

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to merge the Rows in ALV table?

Hi All,
I want to merge the Rows in my ALV table(SALV_WD_TABLE). Is it possible?
Regards,
Yugesh A.

Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/

How to make the row as a hyperlink in Crystal 2008

Hi,
Could you give me advise on how to make the row as a hyperlink and call another report.
Thank you in advance.
Rose

Hi Sastry,
I was able to create the subreport and its working.
Thank you so much.
Regards.
Rose

Need to reorder the rows in my report

Hi,
i have generated an report like
d1 f1
a 10
b 20
c 30
d 40
e 50
and also i created two rows by using calculated items in pivot table view as
d1 f1
a 10
b 20
c 30
g 40
h 50
e 50(b+c)
f 90(g+h)
in the dashboard my reports as
d1 f1
a 10
b 20
c 30
g 40
h 50
e 50(b+c)
f 90(g+h)
but my requirement is i need to rearrange the order like
d1 f1
a 10
b 20
e 50(b+c)
c 30
h 50
f 90(g+h)
g 40
any way to reorder the rows.its urgent can anyone reply me soon.
appreciate your response!
Edited by: Nandha on 10 Jan, 2012 5:09 AM
Edited by: Nandha on 10 Jan, 2012 5:11 AM

Hi,
Take dummy column and apply rank to the first column and make it hidden and apply sorting on the column..
Hope this works for you..
Regards,
Kishore

Urgent : how to select the rows in the ALV Grid Control

How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
<b>Its very Urgent</b>

Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
    IMPORTING
      et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
    CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
         EXPORTING
              textline1 = 'You must choose a valid line'.
    EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
     READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
    ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
    CALL METHOD go_grid->set_selected_rows
        exporting
          it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan

In zfile how to insert the row (urgent)

hello,
i am making the zfile of standard programme, in that zfile how to insert the row for remarks, while making the zfile, in programme nothing is displaying i mean codes, how to identify and insert the row for remarks please explain at your earliest.
thanks
suja

hello,
thanks for your rely,
again having the problem of while clicking the insert button, the insert button is not not accessing, insert button is not responding.
Also i want to know the original programmes codes i have copy and paste the same in my zprogramme or what, please let me know after what i have to do.
thanks
suja

How to lock the rows in program

how to lock the rows in program

Do not create a duplicate thread.
many had already answered your query here.
how to lock the rows in program
Regards,
Prazy

How to reorder the rows in a UITableView

Similar Messages

Maybe you are looking for