How to repair a mov-file?

Hi there,
some of my Movie files stored on an external Harddisk can no longer be viewed, copied or seen in Final Cut X. The finder tells me, that some objects are missing (errors -36 and - after I clicked "ok" no 43). Is there any program to find out what's missing?
Never had this problem before in the last 20 years.
Is it possible, that the files weren't fully copied to the harddisk without me noticing it?
Thanks for any help.
Regards,
Hans Hartings

The drive can be seen, the files even can be imported, but then it looks like this:
The canvas stays black (sometimes green,too)

Similar Messages

How to repair corrupted xp files with the Toshiba recovery dvd pkg

Hello all, my Satellite a105-s4054 has some corrupted xp os files. Please advise on how to repair only these files using the recovery dvd pks included with my sytem. I would rather not have to do a complete format and install. And it is now obvious which of the individual files listed should be replaced to repair the corrupted files.
Is there way to just replace the corrupted files?
Thank you

Satellite A105-S4054
..replace the corrupted files?
If they are system files, this will fix them.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry

How can I play mov file on ipad2?

How can I play mov file on ipd2? Anyone? Thanks.

I imported (using Photos app) a .mov file from my Nikon camera. Tap the icon and it played.
 Cheers, Tom

How to Repair Database .pst file of MS Outlook?

I am unable to open my Outlook file due to corruption how to repair database .pst file of MS outlook. I was using Microsoft Outlook 2007 from last 2 years and everything is going well. But suddenly I have got an error message “outlook data file cannot
be accessed ” while accessing PST file. It was also suggested me to run scanpst.exe tool. I had tried to repair my inaccessible PST file many times with the help of Inbox repair tool. But this utility is unable to solve my issue, please suggest me how
can I repair my corrupted database.pst file without losing any information. Is there any way to restore all information from inaccessible PST file into new PST file to continue working as previously?

Hi,
My first recommendation is Scanpst.exe from Microsoft, but since you mentioned it didn't fix the issue, you can also try some 3rd-party tools to fix the data file. Please remember to keep a backup before performing any actions on the file.
In case the issue was caused by the corrupted profile, you can also create a new profile and setup an account in Outlook, check if you can open the .pst file.
For reference:
How to create and configure email profiles in Outlook
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How do i edit move file in pre elements

I shot in a canon 60d the footage is not supported in pre elements ,how do i edit move file in pre elements

issac
What version of Premiere Elements are you using and on what computer operating system is it running?
When you write "move" file, do you mean "movie" file?
Do you have QuickTime installed on your computer along with Premiere Elements? If not, please do so.
Generalizing because you did not give all the details, I would say that the Canon 60D AVCHD.mov file should be supported by
Premiere Elements as long as you have QuickTime installed on the same computer with Premiere Elements.
Please review and consider and supply more details.
We will be watching for the details.
Thank you.
ATR

How can I transfer .mov files to my iPad?

How can I transfer .mov files to my iPad?

If it's on a SD card in your camera, you cau use the camera connection kit, either by connecting the camera or inserting the SD card.
If it's on your computer, you can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
 Cheers, Tom

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How to open a .MOV file with Maverick?

Hello,
I recorded some videos with my iPhone 4S. i sync it then with my computer, but it says that it can not open them. Why? How can i open .MOV files with my computer (running with Maverick 10.9.4) ?

Try VLC.
Video Player - VLC
More.
Video Player - Divx
Video Player – Flip4Mac

How to add a .mov file to i tunes

how to add a .mov file to i tunes

Export to master file. Use H.264 and in the When Done selection pick iTunes library or whatever.

How can copy or move files by my AI plugin in Leopard??

How can copy or move files by my AI plugin in Leopard??
Thanks!
hanyang

You can use "execve". This example will copy /tmp/file1 to /tmp/file2 #include <stdio.h> #include <sys/types.h> #include <unistd.h> pid_t forkPid; char *childargs[] = { "cp", "/tmp/file1", "/tmp/file2", 0 }; if( ( forkPid = fork() ) == 0 ) { execve( "/bin/cp", childargs, NULL ); } else if( forkPid > 0 ) { printf( "Success!" ); } else { printf( "Can't fork" ); } For more information, man execve.

How do I quickly move files from old iMac to new one?

how do I quickly move files from old iMac to a new one?

How many files, and what total size?
To move ALL your files from an old Mac, you would use Migration Assistant, using either an Ethernet or Firewire connection. It's not quick, though.
To move just a few, you COULD put the old Mac into target mode (reboot it while holding T, and connect a Firewire cable, with Thunderbolt adaptor on the new end if need be). Or you could just copy them via an external (probably USB, for compatibility) drive or flash drive, formatted Mac Extended.
Matt

HT3775 How do I import .mov files into iPhoto, iMovie, iTunes?

How do I import .mov files into iPhoto, iMovie, iTunes?

This is just a hunch - are they AVCHD? What type of camera/camcorder are they from?
http://support.apple.com/kb/HT5409?viewlocale=en_US&locale=en_US
There are many more hits if you do a search in the forums on those.
If they are not, then post back with camera info including what it says in the specs about the file forumat it shoots video in.

How can i repair a .mov file?

I have some important .mov files i have been using in FCP but have mysteriously become damaged and can no longer be read by quicktime or more importantly final cut.
Is there any software out there to repair mov files?
The files are still around 1.2gb each so the information must still be there?
Any help appreciated as this is quite an important project.
Chris

Not likely. Media files have a nasty way of not being completely rebuilt. But my favorite data recovery tool is Data Rescue. Note you will need a drive large enough to hold the recovered files. Do not recover to the same drive.
http://versiontracker.com/dyn/moreinfo/macosx/1133
http://versiontracker.com/php/qs.php?mode=basic&action=search&str=data+recovery& srchArea=macosx%7Cmacosx-all&submit=Go
You have not provided much information but your main concern will be trying to figure out what happened to your files. Is the drive media damaged? Are they bad copies? And what is your next plan if recovery fails? You have only a 50/50 chance that it will succeed so start trying to figure out the next step.
bogiesan

How do I repair currupted mov. files?

Long story short, I edited a wedding on Final Cut studio. Both the software as well as all my uploaded footage collected on an external harddrive. BOOM My hard drive completely becomes corrupt and I can't mount it (meaning my computer doesn't recognize the drive). I then purchased a data-recovery software and, after about two hours, recovered the corrupted files. I then downloaded "VLC" as well as "DIGITAL REBELLION" to repair the files and they cannot seem to do so. Case and point -HELP! I need these MOV. files as soon as possible and I turn to this forum for guidance of any kind. My Mac is a desktop iMac. It's completely updated and I'm running on iOS X 7.3. HELP (Beatles' voice)

I take it you have no backups of these critical files?
I really don't know what you can do. Maybe some video expert will read this thread and offer to edit the data if that is possible (I have my doubts).

How to delete a MOV file off of my iPad

I just bought a Nikon S8100 camera, it can shoot video as well. I shot a couple of test videos, and left it in 1080p mode. I used my camera kit to connect it directly to my iPad, and uploaded the pictures I had taken, and the two videos. They all load into the Photos app on the iPad, but the videos won't play. I figured out that the format was not supported on the iPad. When I lower the resolution to 720p or lower, it will play on the iPad, and can be managed there. My problem is that I can't figure out how to DELETE the 2 .mov files I initially loaded. When I am in the Photos app, the thumbnail just say "MOV". Unlike every other item, this one I cannot select, so I can't delete. I've tried syncing through iTunes and accessing my iPad files that way, but there does not seem to be an option there to delete.

I had the same problem with my Kodak FX3 (Playsport) camcorder. I uploaded some .MOV files to my iPad but it won't play them and I can't seem to delete them.
These files don't show up in the Video app so we can't use that to delete them.
Any suggestions? Anyone?
Thanks

How to repair a mov-file?

Similar Messages

Maybe you are looking for