How to repair an "UNRECOVERABLE ERROR" after scinstall ?
How can I repair it?
Dual node cluster, S10/x86 01/06, SC3.1 patch 120501-05
scinstall reboots the second node and waiting for it. The second node cannot boot. Error messages:
clcomm: per node IP config clprivnet0:-1 (349): 172.16.193.1 failed with 19
_cladm: CL_CLUSTER_ENABLE: No such device
clcomm: per node IP config clprivnet0:-1 (349): 172.16.193.1 failed with 19
UNRECOVERABLE ERROR: Sun Cluster boot: Could not initialize cluster framework
Please reboot in non cluster mode(boot -x) and Repair
Hi,
I had faced this problem a while ago. But i am not sure about the error message. But in my case rpc service was not enabled.
I dont know if thats a problem in your case. But in that case you can confirm it by running rpcinfo and make sure the startup script S71rpc is present in rc2.d.
Vivek
Similar Messages
-
How to repair Open Directory Master after Changing Hostname
Summary:
How to repair Open Directory after Changing your Server's Hostname (see separate post)
Problem:
I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
Procedure:
1. Precautions:
Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
2. Change hostname and demote OD Master
a) I re-booted the server from the clone
b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
c) I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
3. List of 'fixes'
I tried the following fixes to no avail (which does not mean that you can skip them)
a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
b) Checked with Lookup in Network Utility, all was fine
c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
( N.B. you need not delete email certificate and private/public keys)
d) I tried to assign a new static IP in Networking Preferences (had no visible result)
e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
Despite all this I could not re-create an OD Master.
I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
I was about to give up when I read the posts on this page and I entered the Terminal commands
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
I had not much hope when I set about to re-create the OD Master from the Server App.
But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
Final touch: re-import the user accounts.
Epilogue:
I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
(Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
Thank you all !
Let's hope that Apple will fix this annoying issue in the next server update.
Regards,
TwistanHi Rhyan,
Please try clearing the security cache
http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
Please remember to click 'Mark as Answer' on the answer if it helps you -
Satellite C55-A-1N1 - How to repair Windows 8.1 after trying Linux?
Hi,
Laptop: Satellite C55-A-1N1
In my infinite wisdom I tried to install Linux in a dual boot scenario like my old laptop. I shrunk the main windows partition in windows 8.1 first and then installed linux to that partition. After rebooting, Linux worked but not windows since I had to disable secure boot and set bios to CSM for linux to load.
After putting secure boot back to on and bios to EFI, windows no longer boots. I tried to repair the windows operating system by running the repair tools from another Win8.1 DVD but they didn't repair the booting. I subsequently learned that holding zero at boot brings you to the hidden recovery partition.........except my doesn't!
So, I have checked the windows and recovery partitions are intact but I cannot get to the recovery partition or repair the windows installation with windows 8.1 repair tools. No, I don't have any backups, other images or system restore options. Clever, aren't I? I only have the original recovery partition (which I can't access) and windows partition to play with. I don't want to lose my OEM Windows 8.1 license...
Any ideas how to salvage this windows installation?
Thanks in advance for any help.You have made the same mistake as many other people. On this forum we have discussed so many times how it works and tried to explain how all this works.
In users manuals is clearly described that every notebook owner should create recovery media (DVD or USB) and this created recovery media can be used for recovery image installation in case that HDD recovery option doesn't work or in case that HDD is defective and must be replaced.
As I can see you don't have this recovery media. Fact is that HDD recovery installation can be started if notebook has factory settings only. After your Linux experiment this option is gone and there is no way to start it again.
What you can do now? I know it sounds stupid now but if you want to install original recovery image you need to order new recovery media and it can be done on https://backupmedia.toshiba.eu/landing.aspx -
How to see errors after compilation.
Hello,
I am new to SQL/Developer.
How do we check the errors after running the script in sql/developer.
Warning: execution completed with warning.
I tried show errors but its not working.
Please help.
Thanks,
SrikanthHi,
After you run your script, you execute show errors.
Reagrds Salim.
SQL> create or replace function ff return number
2 is
3 begin
4 dbms_output.put_line(pp);
5 end ;
6 /
Warning: Function created with compilation errors.
SQL> show errors;
Errors for FUNCTION FF:
LINE/COL ERROR
4/1 PL/SQL: Statement ignored
4/22 PLS-00201: identifier 'PP' must be declared
SQL> -
How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.
This is a guide to repair projects that get a "TickTime.cpp-290" error after opening a specific project.
Prerequisites:
Project repair tool (download link below)
WinRAR or any file archiver
Damaged project file
As an example, let's say the name of my damaged project is 'test.prproj'
Steps:
1. Download the project repair tool here: https://www.dropbox.com/s/3fyja0ws7l5gkbt/pp-repair-0.1.35.zip?dl=0
2. Rename your project file extension from 'test.prproj' to 'test.zip' (a warning appears saying the file might become unusable. Do not be concerned about the warning. Click OK and move to the next step.)
3. Extract the contents of 'test.zip' to a location on your computer. (Right click on the file and select ‘Extract files’ > Choose a location > Click OK).
4. Go to the extracted location. Note the file 'test' has no extension.
5. Rename the file, 'test.prproj'.
6. Launch the project repair tool, and then select the file 'test.prproj' (the one that we renamed in the last step).
7. Deselect all the check-boxes in the project repair tool.
8. Click the Repair button.
9. After a few seconds you see a message saying 'Success'.
10. Open the repaired file in Premiere Pro and then reset the workspace. Choose Window > Workspace > Reset Current Workspace.
11. Click the Save button to reduce the project size.
12. Your project is now repaired.
NOTE: If a file containing letters such as ã, å, ê, í, ú don’t repair, rename the file to something that doesn't contain these letters.Hi Rameez,
first of all thanks a bunch for the tool - it saved our neck this morning on a tight deadline.
One minor note: I did get a message that the (already uncompressed + renamed) file is not uncompressed until I ran the tool as Administrator so you might want to add that to the FAQ entry...
Other than that I'm very much interested in what triggers this bug so we can potentially prevent it.
Background:
Specs: Windows 8.1, German locale (ie comma is decimal symbol), Premiere Pro CC 2014.2 installed in English
My colleague who ran into the TickTime.cpp-290 error remembers having created a new workspace while working on the project. That seems to have triggered the issue as we haven't had any trouble on other projects yet. It also got saved into the project file:
<MZ.Project.WorkspaceName>Bearbeitung</MZ.Project.WorkspaceName>
Any autosaves after he added the workspace were corrupted as well while the ones dating back to earlier still open fine.
I'd like to mention that Premiere did import previous (German language) workspaces - dating back until CS5. Not sure if that comes into play.
On the other hand, the debug log looks like there only is an issue with the decimal symbol:
10:08:06: Input: C:/temp/trouble/uncompressed/final.prproj
10:08:06: Path: C:/temp/trouble/uncompressed Basename: final Extension:prproj
10:08:06: 19852-> from: <PlaybackSpeed>0,069148936170212769</PlaybackSpeed>
10:08:06: 19852-> to: <PlaybackSpeed>0.069148936170212769</PlaybackSpeed>
10:08:06: 23970-> from: <PlaybackSpeed>0,0062741915889604422</PlaybackSpeed>
10:08:06: 23970-> to: <PlaybackSpeed>0.0062741915889604422</PlaybackSpeed>
I really need to make sure that this is no general problem with German locales as we have multiple users on this kind of config and can't afford projects breaking.
Or do we "just" need to watch out to get rid of the old workspaces? I'm a little puzzled to be honest.
Maybe it helps to mention that we are on CC Enterprise
Best regards,
Mike -
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well. -
My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this?I have previewed my book but after cliking BUY BOOK it compiles it OK but then it always states an error after of during uploading it to the store.
How can I rectify this? -
ADF 11g How to prevent reinvokation method action after error
We have a page with an action binding that is invoked automaticaly on entering the page:
<executables>
<invokeAction id="invokeProcess" Binds="process"/>
If an error (exeption) occurs the invoke action will be called 5 times. This is that our underlying BPEL-Process is also invoked 5 times.
How can we prevent the resubmit after an exception occures?How are you bringing this up for edit? Via a dialog?
Have you looked at "setCurrentRowWithKeyStr" operation in the page def? Our application uses dialogs for editing one row at a time, when the user clicked on the row via a command link, we call setCurrentRowWithKey to make sure the view object's iterator cursor is at the right location when this record is brought up for edit. -
How do I convert a large file which show error after is converting?
I've tried to export a PDF to Excel and word file and have not been able, show error after downloading and show converting in progress
File is les 100MB and 936 pagesHi Large Files to Convert,
Even when a PDF file is under the 100-MB file size limit, it could be that the large number of pages is adding a level of complexity that causes the ExportPDF service to timeout before it can finish the conversion.
If the PDF file wasn't created from a scanned document, you can simplify the conversion somewhat by disabling OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community
Otherwise, you might want to consider using a free trial of Acrobat to convert that large file. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara -
How avoid "AUD: OS Errors" after server restart
Hi,
After restart my windows 2003 i'm receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Someone could tell me how I can avoid these messages?
Many thanks in advance.Hi schavali,
The OS version is Microsoft Windows 2003 Standard Edition.
Initially audit_trail value was 'DB' and i was receiving the next messages in my Oracle 11g R2 Standard Edition Be one alert.log file:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
Following the oradba suggestions i changed audit_trail value from 'DB' to 'OS', but i continued receiving similar messages in the alert.log:
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 31 encountered while writing audit record
AUD: OS Error = 5 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
AUD: OS Error = 1717 encountered while writing audit record
What do you thinking about? How i can avoid this error messages?
Many thanks in advance. -
How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012
hi,
can you repair system file errors like ntoskrnl.exe in windows server 2008 and 2012 like like before in windows server 2003 ?
the steps were repairing ntoskrnl.exe error in windows server 2003
1- have a 2003 cd and from that cd start recovery console and copy from i386 directory ntldr and ntdetect.com to windows /system32 directory on the server and then repairing
2- MBR with fixmbr command and then rebuild BOT.INI file with bootcfg/rebuild .
now my question is how you repair or solve such problem with ntoskrnl.exe error in windows server 2008 and windows server 2012
thanks
johan
h.davidfirst this wil take a lot of time for windows 2008 and 2012 ,
and what about windows 2003 I thing this has no startup repair
thanks
johan
h.david
What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Library recovery: how can I recover a library after I get this message: "There was an error opening the database for the library “/Users/Jim/Pictures/Libraries/K2 Library.aplibrary”???
Thanks a lot, Frank. The lsregister did the trick! I am testing this on 10.8.2.
http://support.apple.com/kb/TA24770 : I deleted the "com.apple.LaunchServices.plist", and restarted the Finder, even logged off and on again; did not change anything. The file has not been recreated, so it may not be used anymore.
http://itpixie.com/2011/05/fix-duplicate-old-items-open-with-list/#.ULZqa6XAoqY
The direct "copy and paste" from the post did not work: I had to retype it :
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
but then it worked like a charm!
Cheers
Léonie
And btw: I turned on the "-v" option for the lsregister to see, what was going on, and saw plenty of error messages (error -10811); so I repeated the command with "sudo". After that I still saw five iPhotos. Repeating as regular user finally got rid of the redundant iPhoto entries. It looks like registering as super user may be causing this trouble. -
How to handle TDMS -2519 error that appears after some time?
Dear all,
I am having two compactRio devices (cRIO-9074) that are applied for data logging and control. As is convenient, one deterministic loop handles the data acquisition, while another loop handles the data storage.
The data storage loop basically creates a new TDMS file per data set that is subsequently stored to the disk.
The whole software operates as expected for some time (at least one day without any issues), but then I get a File I/O error -2519 that is thrown by TDMS open. This error occurs after some time on both compactRio systems. How should I handle this error properly and what may be the probable cause?
Upon system restart the error disappears and the system continues logging. Therefore, when having this error, I restart the system automatically, but this is to my opinion no proper solution. The fact that the error is cleared upon system restart, seems like it is a resource problem as outlined in: http://forums.ni.com/t5/Real-Time-Measurement-and/2519-error-trying-to-create-a-TDMS-file/td-p/26546... There they recommend using the FPGA programming mode to save on resources. However, I would like to continue using the Scanning Mode Interface instead. To better dedicate the processor resources, I changed the execution options of the different loops and gave Priority to the data acquisition and data storage loop. I also distributed the processes in different Execution Systems, to optimally divide tasks within the real-time processor.
When I manually neglect the error (just clear the error in the data storage loop), the issue remains for the following data sets that need to be processed. So once the error is thrown, it reoccurs upon trying to store each subsequent data set.
I also consulted http://forums.ni.com/t5/Real-Time-Measurement-and/tdms-2519-error/m-p/2569381/highlight/true#M13920 where the same error is reported and the solution is to update a .dll file in the installation. However, the installed software in my case appears to be okay. Also in that case, the problem occurred immediately, while in my case the problem arises after some time. Again this indicates towards a resource issue.
Can you please provide me with some possible solution to overcome this problem? I am looking forward to your opinions. Contact me if anything is unclear within my explanation, or you need additional information.Hi gielvdbroeck,
Good job for the perfect description and for the well researched topic!
The first thing that comes to my mind is to Format and reinstall the software on the cRIO. This will make sure that you have a clean installation and there is no corruption in the OS.
One more thing to get into account is the memory. If you do not have enough memory where to store the file it's possible to throw this error.
Best,
Bozhidar -
How to reinstall APISupport.dll error detected after windows open
I am getting error message after windows open that TB\APISupport\APISupport.dll application could not be found. How shall I remove this error.Regards
Hi @raghavraj ,
Welcome to the HP Support Forums! I did some research into that error message and it appears as if it is a virus or malware. I would recommend that you run your anti-virus and anti-malware software to fix this issue. It appears to be related to a Conduit search program or add-on.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP
Maybe you are looking for
-
My iPhone 4 does not appear in source list of itune
-
Dear All, Is there any best practice to avoid having around 50 Clients, where the Client version number shows in the right side, but client doesn't show as installed, see attached screenshot. SCCM version is 2012 SP1 CU5 (5.00.7804.1600), Server, Adm
-
I have an iPad 2 and after the 7.0.3 update it will not charge. It has completely died and it will not reset. I have plugged in the charger from the wall and my laptop but it doesn't charge. It shows that the charger is in but all I see is the batter
-
Folders added to USB disk connected to EA6700 not seen by Panasonic TV
Hello, I have a Seagate 1.5TB USB ST315005EXA101-RK connected to EA6700. The USB disk contains two folders with pictures, and they are fully visible in the Panasonic TV. Today I added some other folders to the USB disk, but they are not seen in the P
-
Bridge doesn't even open - partial uninstall?
I purchased CS6 and installed it - I think everything worked fine when installed. A couple of months later, my bridge program just stopped working - on the windows 7 pro desktop and almost immediately on the win 8 laptop. And of course, if Bridge d