How to Repair IP address on printer

I had to replace the router on my home network and now my C6180 all-in-one printer does not recognize/connect to the router. I have a Vista operating system on the PCs, a Cisco Valet M10 router and an HP C6180. The PCs are connected wirelessly to the network and work fine. The Printer is connected via ethernet cable to the house cable box and the house cable box is then connected via cable to the router. I've gone through numerous help desk and think I've identified the problem as needing to manually change the IP address on the printer itself. I have tried to enter that manually but 1) the IP address ends in one or two digits but I can't find how to delete the other digits on the HP and 2) when I hit ok, the manual entry disappears and is not recognized. Can anyone tell me how to repair the IP address on the printer?
This question was solved.
View Solution.

Hi,
If the last number of the IP address you are trying to assign is for example 12, try entering 012. So basically, if it wants three digits in each of the four fields, just enter nought(s) to make up the number. This may also be the reason it refuses to accept the address when you click Ok.
Let me know how it goes.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

How can I make Address Book print labels how I want, or export to Word?

I have found a number of serious problems with Address Book, which unless I can overcome them mean it is entirely useless for me. Almost all are to do with creating mailing labels or envelopes:
1.I can't find any way of defining a sheet format for labels different from those on the pre-defined list. My labels are in 2 columns of 8, on a sheet 12” long by 8” wide, margins 0.5mm top and bottom, and ½” left and right. The labels themselves are 3½” x1½”. Address Book can't do it. It is odd that this is so restrictive, whereas with envelopes one has total flexibility.
2.Although I can define which address I want to print on each label or envelope, I can't find a way of defining which field should be used for the first (name) line. It always consists of the First and Last names as recorded on each card. This is not what I want. For different mailings, I want to use different first lines, as in many cases each card is the address of a family group, the First and Last names simply recording the names of the parents e.g., John and Mary Smith. But for my Christmas mailing I want to print 'The Smith Family', whereas for my charity mailshots I want to print 'Mrs Mary Smith', as she is the charity supporter, not her husband or children.
3.The address layout seems to be fixed, with each element on a separate line. This is not how I want to print, as in some cases it makes for too many lines, particularly on labels. I want to put the zip/post-code on the same line as the county or state, separated by about ½”. But I can't see how to dictate the layout at all. On labels there is a further problem, in that I can't define a vertical and/or horizontal off-set for the text.
4.The Country does not print at all on labels, making the application quite useless for foreign mailings, and I can't find a way of overcoming this. Over half our mailing addresses are affected by this.
5. And another problem really puts the final cherry on the icing of this cake: There is no way I can find of exporting the data from the address book in a format, e.g. a csv file, that I can bring into a word processor where I could do these mailings how I want them. Not only does the box fail to do what I need, it is also locked.
I don't understand why, having set up Address Book on the database principle that one should have have to record each contact only once no matter how many ways one needs to use the data, it seems it has then been implemented in a way that prevents it being used in one of the most obvious ways, to print addresses in a format of the user's choice.
The Applecare adviser tells me the problems I have can't be overcome. Is that right, or is she, and I missing something? Please help.

noondaywitch wrote:
"It's Christmas card time again and the fact that Address Book is useless for this purpose is really frustrating."
While I sympathise with the functionality of Address Book, I'm old-fashioned enough to write my cards and envelopes by hand (shock! horror!) and get quite p***-off to receive bulk-printed stuff.
Just a thought, peeps.
It'd be all too easy to follow that up with a cheapshot making reference to how many Christmas cards you have to send, but I'll rise above that and explain that some of us might want to use this for business contacts and have 300+ cards to address.
It is a shame that the printing feature from Address Book is so close, yet so far from performing this simple task. It is a shame that Pages can run mail merge, but only for one record per page (which is useless for label printing). It is also a shame that MS Word for Mac does proper labels but doesn't recognise Address Book as a datasource.
These things are all a shame because with Apple's software, you rather expect things to "just work", as per their advertising, and when very simple things don't "just work", it difficult not to feel cheated.

Address Book - how do I remove image when printing labels?

Hi
Just getting ready to print the Xmas card labels - thought i'd add an image in the Address Book 'Print' Dialogue - then changed my mind!!!
Big mistake - there appears to be no (easy / obvious) way to remove the image!!!
Any ideas please.
Thanks

I never could figure out how to do this via the GUI and had to resort to a bit of "trickery". i.e.:
- quit the Address Book application.
- in Finder, go to ~/Library/Preferences and double click
on com.apple.AddressBook.plist ( or just type
"open ~/Library/Preferences/com.apple.AddressBook.plist
in a Terminal window
- in the property list editor, delete the value for
"ABImagePath" , which is under "0" in "ABCustomEnvelopeDefinitions"
- save the file
- quit the Property List Editor
- start Address Book
/cj
various Mac OS X (10.4.3)
various Mac OS X (10.4.3)
various Mac OS X (10.4.3)
various Mac OS X (10.4.3)

How can I address and print an envelop from a letter created in Pages 09?

How can I address and print an envelop from a letter created in Pages 09?

You can copy & paste the address from the letter into a document formatted to envelope size. I prefer to use the EasyEnvelopes widget. If you have copied an address to the clipboard, it will automatically be added to the widget.

Address Book printing completely broken

I cannot print at all from Address Book. I am trying to print labels on an iMac G5 with 10.5.8. Here's what happens:
I have a group with about 25 contacts selected in the left column, then choose File>Print. (Often the first time I choose print it does nothing, so I choose print again.) When the print dialog opens, the preview is blank and underneath it says "Sorting..." but never seems to stop. If I then choose the "Layout" tab and click on any of the drop-down menus, the addresses show up in the preview, but "Sorting..." never goes away. The number of addresses reported and previewed in the print dialog is seemingly random (11 or 13 or 22 of the actual 25).
At this point, if I click "Print," the Address Book print settings disappear from the dialog and nothing happens. If I press cancel, either the same thing happens or the whole app crashes. Print to pdf doesn't work either.
I tried printing from a MacBook that is synced to my iMac with MobileMe, but got the same results. I also reinstalled the 10.5.8 combo update and repaired permissions.

Okay, the one test I didn't try before posting turned out to be the answer. The group included some contacts that did not have complete addresses. I didn't realize how badly that would screw things up. After selecting only the contacts with complete addresses everything worked as expected.

How can i order a new printer head for my photoshop 7250e

How can i order a new printer head for my photoshop 7250e Is there a number i can ring to speak to someone or email address i can use or a web page where i can order one
or a list of agents i can use to get it from
Finding simple information seems impossible, no where does it mention spares or replacements
I have tried a lot of fault finding am convinced this is the problem

Hello NigelH1,
The Print Head for the Photosmart 7250 is not available outside HP.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How to delete an address in a draft email?

How to delete an address in a draft email? I highlight it. click delete it changes to a light grey print and thats all. There is no subject or body in the mail.

Thats what I have been doing but it does not delete just turns into grey print instead of black.

How to default an address number delivery address in the PO item

Hi All,
I have some combination of certain Material / Vendor / Delivery address.
I have created some address numbers from transaction MEAN.
I can successfully assign these in PO detail manually. Then the address gets updated from it
for plant or storage location if specified.
What I need to know is how to "default" this address number in the PO detail.
I couldn't fine appropriate field in info record, but I have a feeling that it should be possible.
Could anyone help me on this please?
Thanks,
ATO

Hi Nadia,
Thank you for your reply.
The plan is that storage location gets default on the PO by material master setting.
I have configured the storage location address, so this defaults in the delivery address tab.
This storage location is our warehouse to receive goods.
Sometimes we delivery goods directory to the vendor without receiving into the warehouse.
In this scenario, we are using the address number to print the vendor address on the PO output.
The combination of material and vendor is unique when we need to deliver directory.
So the expectation is to default this address number in this certain case.
Do you mean this will be possible without user exit?
Thanks,
ATO

How to retrieve Delivery address when entered manually in PO

Hi All,
I am trying to print PO through Smartform. I am retrieving the delivery address based on the adrnr number/Customer number/Vendor Number from EKPO table. Now when the user manually changed the address with out adrnr/Customer number/Vendor Number, how to retrieve that address in order to print as these three fileds will be blank in EKPO table. How and where the SAP will store that address. Any help thanks.

Hi,
In the sales order point of view I know it will be stored in the ADRC table for the VBPA-ADRC number entry. Similar to that I hope the EKPO ADRC will have an another entry in the ADRC table.
Thanks,
Greetson

How do i install a brother printer on macbook

How can i install a Brother Printer on a MacBook
I do not know the IP address of the printer
i have tried installing the Brother software but nothing seems to work

Most Brother printers use Bonjour to advertise themselves to the subnet.
So, you don't generally need to hardcode your printer's IP address.
You can if you want to, though.
When you installed the Brother software, what specifically did you install?
Something off a CD, something you downloaded, what? Is it on Lion or SL?
Where is your MacBook relative to your printer, network-wise?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Access - How to create Mail Address only list?

Printing envelopes from mail lists - via Microsoft Excel? Access - How to create Mail Address Only list?
Bearing my "new boy" status, step by step instruction would be appreciated.

Hi
This is a question only about the Microsoft products and has nothing to do with Toshiba notebooks but I have investigated a little bit in the net and found this useful sites:
http://support.microsoft.com/kb/q141991/
https://www.nahu.org/member/using%20excel%20to%20create%20lists%20and%20labels .pdf

Can any body tell me how to make changes in the print layout of Fb03.

hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
Mave

If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu

How do I set up e print for my laserjet P1102 for Mac

how do I set up e print for my laserjet P1102 for Mac? I have downloaded soft ware & ejected disc as directed & don't know next step. Thanks

Hi,
As you have setup the printer now you should be having the printers IP address.
If not please connect your printer to wifi network with a valid internet network and get the IP address by printing the config page.
Make sure you connect Mac Book to the same wifi network.
Now type the IP address on a browser in your Mac Book and hit enter.
You should be able to see the Embedded Web Server page of your printer.
Now navigate to Web Services Tab.
Click on Enable to enable eprint on your printer.
This will enable the web services on your printer and print the information sheet.
The information sheet will contain the claim code for your printer.
The <Claimcode>@hpeprint.com will be your email ID for the printer.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

How do i set up mobile printing

how do i set up mobile printing ?

@angelsmith4,
The best way to setup mobile printing for your devices is:
Go to the Setup menu (wrench icon) on your printer.
Go to the Web Services menu.
Enable web services.
After which, an information page should print out with a three setup process.
Sign up at ePrintCenter.com.
Register your printer's ePrint code (it will be on the information page on step two).
Customize your printer's ePrint address.
Now you can print on the go by emailing your printer from your device, and addressing the email to your printer's ePrint address.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to Repair IP address on printer

Similar Messages

Maybe you are looking for