How to repair the harddrive

macbook pro restarted into osx utility box and is unresponsive I tryed to restart it after stoping an emty trash attempt just before this happened

I was backing up my hard drive to an external WD my book I used there smart ware back up software because I didn't understand what time machine was , I ran time machine at the same time as the smart ware and told time machine to back up to the WD. The WD completed successfully and the time machine did not , then my next mistake was to delete somw files that I apparently needed because OSX stopped me in the middle of emptying the trash because (Itune.??, can;t remember what it was called ) file was in use. so i stopped the tash emptying and looked in the trash folder to remove the file that was being used from the trash but a bunch of files where missing so I restarted the computer , which was aparently another mistake because the osx utility box came up and is totally unresponsive with the WD external plugged in .  What did I do ? How do  I fix it?

Similar Messages

  • How to Repair The Secoundary Indexes

    HI
    Can any body tell me How to Repair the Missing Secoundary Indexes

    Hi,
    as Nagesh pointed, the program will do so.
    If you want to control a bit further, use function module 'RSDU_INFOCUBE_INDEXES_REPAIR':
    i_infocube        = <techname>
    i_with_aggregates = 'X' if you want aggregate IDX rebuilt as well
    i_double_facttab  = 'X' if you want  E and F fact table processed (otherwise just F)
    i_degenerated     = 'X'
    hope this helps...
    Olviier.

  • How to repair the p.c,repearte the process?

    hi
    guys
                    how to repair the p.c,repearte the process?
    your regards
    suresh

    Hi,
    Right click on the process type in PC where it was failed and select repair/repeat the process.
    Let us know the details.
    Reg
    Pra

  • How to repair the iPhone 5 which buy from New York but now I am in HK

    How to repair the iphone 5 which I buy in  New York
    but I am now in Hong Kong
    I cannot but a air-ticket to New yor for repair
    can I repair in Hong Kong
    Charles
    <Personal Information Removed by Host>

    Probably not because the iPhone warranty is NOT international, but is country specific, so if you purchased it in the US, then it will have to go back to the US for repair.
    You can try and take it into a store in Hong Kong and see if they will help you, but if it is a US phone, then they have every right to refuse due to warranty cover and they also have different models if your phone needs replacing and they won't be able to give you the same model if the phone came to from the US and this is why warranty cover for the iPhone is country specific and NOT international.
    You can try, but you might be out of luck and if so, then there is nothing you can do except send the phone to any relatives that you have living in the US and see if they will take it to an Apple store in the US to get it repaired for you.  Otherwise you'll have to get it repaired on your next trip to the US.
    This is exactly why you should have thought very long and hard before purchasing a US iPhone and having exactly this situation where you can get nothing done about repairing the phone due to country specific warranty.
    The only other thing that you can do of course, is to buy a new iPhone from Hong Kong and then you will have no problem with warranty cover.

  • How to repair the disk using recovery HD??

    how to repair the disk using recovery HD??

    ali ead wrote:
    I dont understand u
    What don't you understand?
    Boot into the Recovery drive. See the link I posted.
    The run Disk First Aid.
    See this -> Disk Utility 12.x: Repair a disk

  • How to remove the harddrive from a dv4 1444dx laptop

    Hi,
    Can anyone tell me how to remove the hard drive from a dv4 1444dx notebook? My laptop does not get pass startup enven in safe mode. I've tried letting the system self-repair and also tried to recovery to a date when it last worked properly, but neither results in success.
    I want to remove the hard drive and back up my data before trying to re-install the original image from the D: drive.
    Thanks for any help you can provide.
    Regards.
    This question was solved.
    View Solution.

    Hi,
    Should be in this book:
       h10032.www1.hp.com/ctg/Manual/c01597750.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to repair the CVP reporting installation?

    Hi,
    I am facing the following issue on the cvp reporting server:
    The Informix database has been installed on the “D” partition. The hard-disk where partition D is installed has been defected so I lost the “D” partition.
    Anyway, I replaced the defected HD by a new one and I added the “D” partition again.
    Do you have any idea, how can I repair the installation of the CVP reporting ?
    Thanks in advance
    Georges

    yes, it is correct but we dont have any backup and now we dont have any data on D:
    i can reinstall the cvp reporting server but the problem is that an upgraded enviroment so i will need a new licenses for a fresh installation that is why i am looking to repair the installation and not to reinstall it
    thanks
    Georges

  • How to repair the error of MARDH

    I have find an error of MARDH,e.g:stock of material 00B0102 in factory 3000,storage 3001 ,2010/4, is 1220 pc,and goods receipt in 2010/05 is 100 pc,but stock from MARDH in 2010/05 is 120 pc.how can i repair the error ,and is it an program error ?
    best regards ,thanks!

    >
    Umakanth R wrote:
    > Hi,
    >
    > You can edit sap table entries via transaction SE16N for table MARDH.
    >
    > Umakanth  R
    this way you can create inconsistencies as well.
    A correction of a value, will not solve the error, you might get the same problem again and you still do not know why.
    You have to investigate the root cause. And if you havent done anything wrong, then chekc OSS for bug fixes, and if there is none, then contact SAP.

  • How to repair the Time Capsule without losing data?

    Hi everyone,
    I am from Vietnam. My 2TB Time Capsule is not working anymore. The LED light is not lit. Brought it for warranty claim. Apple reseller in my country agree to replace a new one for me. But the problem is I will lose all the data. I believe it's HDD still good. But they can't help me to get data. Please advise where can repair the Time capsule in which they can retain the data for me.

    Before you do this be sure and let Apple know that is what you are doing so it will not void the warranty on your Time Capsule.
    That will void the warranty. Generally Apple will not allow you to recover data.
    The TC is basically a backup target for TM.. this is not considered valuable in and of itself. You simply buy the new TC and make a new clean backup.
    If you put data on the TC, it is without any means to backup itself and nor can TM backup data on network drives.. so you are stuck. And that is why we do not recommend TC usage as a NAS.
    See if the reseller is strict about the policy.. some will be prepared to help you out.
    The hard disk has to be removed from the TC.. which is a sealed unit. The hard disk can then be put in a USB holder and the material on the drive copied to the new TC, or any external or network drive.
    There is absolutely no way without removing the drive in a dead TC.

  • How to repair the oracle8.1.7

    I have once installed oracle8.1.7 in windows2000 professional.because the virus destruction I formatted the c drive and reinstalled the windows2000 professional.the oracle8.1.7 is located at e drive.I tried to reinstall the oracle.but I don't know how to remove the servics in control panel.after I reinstalled the oracle8.1.7 in the same directory.because the services in the control panel are conflicted.some errors are occured.even if the service started ,it doesn't work! I don't know how to slove this problem.

    Langyun:
    Since you formatted the C: drive and reinstalled Windows2000 brand new, you should not have a problem removing a service from it.
    The problem sounds like you tried to reinstalled Oracle8.1.7 on an old ORACLE_HOME. The right way of doing this should be: delete the old Oracle8.1.7 installation folder totally and reinstall. To get rid of your unsucessful second time installation, an easy way is to reformat C: drive and reinstall Windows2000, then install Oracle8.1.7 from a new location. This way will take out a lot of doubts caused by the previous installations and save you a lot of trouble shooting time.
    Best luck,
    Han Zhang

  • How to repair the database used by Oracle Identity Manager 11g

    Hi friends,
    I have a question about Oracle Identity Manager 11g.
    As I can repair the database used by Oracle Identity Manager 11g
    Thanks

    I think you can do if the repaired database is replica of old one.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/repair.htm

  • How to repair the headphone jack

    Hey all,
    I have an iphone 4, when using the phone my earbud works, but for some reason whatever is supposed to happen in order to turn off the external mic on the phone doesn't work anymore, meaning whenever i'm on the phone I and the person on the other end of the line can hear everything else that's going on as well.
    I paint houses for a living so the thing has taken some bumps so I'm thinking that something just isn't making contact properly inside the jack.
    If so, how do I go about repairing it?
    Thanks!

    The cost for repair depends on where you have it repaired, whether that be Apple or a third party repair company.  Apple charges a flat rate.
    http://www.apple.com/support/ipod/service/prices/
    Third party companies can do it for much less
    B-rock

  • How to repair the failed delta from R/3 - 0CCA_C11

    Hi experts,
    Due to R/3 refresh the delta load from 0CO_OM_CCA_9 -> 0CCA_C11 is failed on july19, 2008. but on July 20 another delta is successfully loaded in to the cube after the R/3 refresh.
    My question is I can reinit the cube from R/3 and do a full repair request for the month of july is it right?
    Because cube is a addition and I don't want the duplicate records in to the cube. Do I have to delete all the requests that are loaded in the month of july to run the full repair request for the whole month of july, 2008?
    Please let me know. Thank you.
    Sharat.

    Hi,
    You can delete the request in Infocube. 
    Before doing this, check the job status in the source system and the log.  See if any records are sent in the form of IDOCs in the job log of source system. 
    If you dont find any job generated in the source system or records sent in that request from source system, forcibly make the technical status in the monitor screen of BW as red and also the QM status in the Infocube Manage screen as red.  Then delete the request from Infocube.
    Let me know if you need any further information.
    Regards,
    Ravi Kishore

  • How to replace the harddrive in the TV

    I was wondering if i could take the HD out and image the drive so that i can put in a 1TB drive.
    i understand that apple will eventually update these poor things to a 2008-2009 spec, but if they don't i'd like to buy the cheaper one and replace the drive so that i'm not always deleting and downloading things all the time.
    HD movies are going to fill these weee little drives in not time flat.

    i'm sure you can do this, however as this is an official apple support forum you would not be able to get the information here.
    google will most likely give you instructions on how to do that.

  • How to repair the smart cover

    The hinge section of my smart cover has separated from the leather portion. Anyone know of an easy home repair?  Nothing damaged and just separated...

    just tried shoe goo with binder clips to hold it while drying.  looks like it'll work and if it doesn't I'll give the super glue a try.  (regular electrical or black duct tapes in small pieces won't hold at all)
    thanks!

Maybe you are looking for

  • Hiding a field in ALV

    Hi    i have created an ALV with series group 20(domestic) and 21(export).my question is that i need a field NETWRIC when i select the series group 21 in the input field and i dnt need it when i use 20 in series group.i like to know is there any way

  • Please help!! ipad is disabled and will not do a hard reset to go into recovery mode.

    i cannot do a force reset... When i hold in the home and sleep/wake button nothing happens, I have tried these same steps over and over again. Neither the apple or the itunes logo ever pop up.. The screen just stays black. I recently replaced the dig

  • Help needed, various bugs in itunes and with my ipod

    Hello, I thought this would be the best board to post this since the problem is mainly associated with itunes. Simply, my itunes library has been erased completely including songs purchased from the itunes store. However, for those who think they may

  • Help needed Regarding MedRec sample code

    Hi I m new to Weblogic. In order to get a startup, I was trying hands-on on the Medrec sample. During the process, I downloaded medrec_tutorial.zip from http://edocs.bea.com/wls/docs81/medrec_tutorial.zip But i m not able to find any "build" director

  • Web Intelligence - last value in the period

    Hi experts, my problem is i need to know the last status from my object in a time period in Web Intelligence Query Panel I want to check the last value from my object in a period (month) for my Query Filters. How can i do this? Best regards Alex