How to repay Investment Support on the asset? thru which TTY?

Hello guys,
Have anyone used TTY J01/J02 to repay investment support? Because SAP does not allow you to configure custom TTYs under tcode AO83 for repayment of invest. supprt. and J01/J02 uses TTy group 52 "Extraord. write-off invest supprt" which gets classified as unplanned depreciation under Area 41 instead of reducing the Investment support posted under same area 41. Is this the correct way of repaying/refunding?
If not, what TTY to use to refund or repay the support (either partially or fully) and if there is any way to customize TTY specially for repaying/refunding this support.
Open for any suggestions.
Thanks,
Kartik.

Hi Kartik,
You have first to Define Investment Support Measures. In the asset in the tab allocation you have to fill in the investment support area.
When you save this it will create direct a transaction type that you have to use:
In our case I have:
I1     Investment Support Area 81 US GAAP
I2     Investment Support Area 82 LO GAAP
Created the transaction types:
EI1     Investment Support US and LOCAL GAAP
EI2     Investment Support LOCAL GAAP
With EI1 I post in I1 and I2 and with EI2 only in I2
When you want I can sent you some screen shots (see me bussines card how to contact me)

Similar Messages

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

I've been wanting to reset my security questions because it disabled my Apple ID to purchase on Apps store. I don't know how to contact apple support using the 800 number since I'm located in the Philippines, what no. should I use and how? Help pls. :(

How to contact apple support using the 800-number from the Philippines?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

HT204088 My credit card was charge with out my approval, how can I get support with the issue?

My credit card was charge with out my approval, how can I get support with the issue?

If it's a purchase that appears on your purchase history (and not a temporary store holding charge which is made each time that you add or change your credit card details) and nobody else has access to your account and/or devices, then you can either try the 'report a problem' link from your purchase history to contact iTunes Support : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How to process each records in the derived table which i created using cte table using sql server

I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql server

Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to save a fmb in the database thru command prompt?

Hi,
How to save a fmb in the database thru command prompt?
I have around 25 fmb template files which needs to be saved in the database.Every time when we apply the new dump , we need to resave the templates in the database to compile other application related fmb files.Its a time consuming process and Monotonous for me. Is there anyway to save the forms in the database thru batch file, so that just I have to execute the batch file every time.
Expecting your earliest feedback.
Thanks & Regards,
G.S -
[email protected] / [email protected]

Hi Frank,
Thanks for your feeback.
I am using forms6i.Basically our application was migrated from 4.5 to 6i two years back. Due to some reasons our technical team members are insisting us to store the template FMB's into the database to do the coding activities at site.
Once in a month we are receiving the live dump for test database.Hence the problem.
Please suggest the easiest way to store the template FMBs in the database.
Thanks & Regards,
G.S

HT204053 I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

Yes that makes sense, however have you updated it at My Apple ID before trying to change it in your system preferences > iCloud settings, you must do that first.

How do I transfer images from the assets pane over to the library pane?

Hi!
Wouldn’t that make sense to be able to quick drag n’ drop items from the assets-pane over into the library-pane?
…Making the workflow smoother.
This would help a lot in order to structure the folder’s hierarchy/content – e.g. in Hero_images; Logos; Whatever.
Otherwise, it’s quit fastidious:
Assuming I’ve already done some work in a project. Let’s say I have 70 images in my assets pane.
- I select each image, go to usage in the layout
- I context-menu-click in order to place the image into the library/Hero_images-folder
- Times seventy, oughf! :*
Drag n’ dropping from one pane to the other would be much comfortable, no?
Or did I missed something?
Any hints would be much appreciated!
Cheers

Insert the SD card into the iMac. Drag the photos from the iMac to the SD card.
If you want you can create a new folder on the SD card by selecting the SD card/Finder Menubar/File/New Folder

How can i reset the asset value which is already cleared

Hi,
i am facing a problem. actually i want to reverse a particular asset value. but when i tried through ab08 , system say that it is already cleared. so is there any option to reset the cleared asset value? please help me.
Thanks and Regards
Debjit Roy

Hi,
You need to first identify the asset document for that asste and then find out the financial document of that transaction which is cleared.
Then reset the clearing in FBRA
Then reverse in AB08
Regards,
SDNer

I tried to install 8.0.1 but when I tried to open the application it refused because I am non intel so how can I get back to the previous application which I lost?

to install I had to replace an older version which ran on non intel hardware. I cannot find the older version on my pc. Can I download a previous version?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Asset to get the assets in which useful life was chnged.

Which Asset table will capture the changes made to the asset useful life in the asset master data.I mean i should be able to get assets in which the useful life was changed in any speciied period.

Hi,
change documents you can see as follows:
Go tto asset master datta (AS03 or AW01N) - Environment - change document.
regards Bernhard

How to Call another screen using the ABAP Report which is displaying ALV ou

Hello All,
I am developing a ABAP report in which I want to transfer the stock from material to another material.
My Report will include 3 to screens.
The first sleection screen will display all the material with their stock value.
When we execute the report I will get the list of materials along with their current stock. On the top of the output screen I want the Execute button. Also , each line of the output should have checkbox or the ALV provides the functionality of editing one cell like that.....Once the user tick the checkbox or the cell....then I want to move to another screen where user can enter the Quantity and then user will tick ok and then I will call one function module so that the material documnet is posted and transfer of posting form material to material is done successfully.
Could anyone please help me out how to call another screen from the output screen where user can enter the Quantity amount....
I dont want to use the Dialog programming.....I want to create the simple ALV Abap report.
Regards,
Komal Bhutada.

Hi Raymond,
Thanks for the input...I will try this in my code .....
Can you please help me how to insert the checkbox in the ALV Output....so that I can select one of row and then press execute to process further?..
Thanks for the information.
Regards,
Komal.

How to get currect index of the cell on which user actually clicked.

Hi All,
In my widget I have displayed data in tabular format Now I am trying to send the value of the cell on which user has actually clicked. I am not using any standard table control. using standard text() elemnt I am displaying my data in tabular format. I am trying to pass the index of the cell onMouseDown event. I am using widget version 4.5. Please help.
Will reward max point on helpful answer.
Thanks and Regards
Avijit

hi Avijit,
If you are using Table control then you can try for the following :
getCell(rowNo,columnNo) - Gets the data from the cell located in the columnNo column, in the rowNo row.
getInputValue(rowNo,columnNo,value) - Returns the value from the cell located in the columnNo column, in the rowNo row.
thanks
Jaideep Srinivasan

Support; Anyone know how to get .mac support on the phone?

It appears the only way to get help concerning a .mac issue is by emailing them and waiting 24 hours or trying this discussion board. Anyone know of way to call them?
Thanks

Thanks Duane, Does anyone else find it disturbing that you can't call .mac with support issues? I guess it's a matter of pragmatism on apple's part. What if you can't receive email? How do they help you? Or what if you have an immediate problem like a business that depends on its email etc. ?
I use Mac b/c it is user friendly and a pretty darn good system and I am a computer idiot. But if something goes wrong, where's the help?

How to add Ajax support to the dynamic UI componets.

Hi,
I am generating a dynamic table and want to add Ajax support to that table.
How I can do that?

Hi,
In my appication, I am using Ajax with Myfaces (JSF 1.2) & Jboss 4.2.1.
I m generating a table having (couple of selectmenu) dynamically by using the binding attribute of <h:panelGrid> and made that table Ajaxed. When i select some item form the select menu its works fine with Myfaces (JSF 1.2) but when I switched to Sun RI implementaion I got "AjaxUpdate component not found for id: :fForm:null" as exception in the console.

How to repay Investment Support on the asset? thru which TTY?

Similar Messages

Maybe you are looking for