How to replac the BIOS battery on notebook MSI GE70

I need to replace the BIOS battery to time but I cannot see any guide how to find it ? Do you have any pointers ?
Thanks!

https://forum-en.msi.com/faq/article/ge70
The yellow thing under the wireless card.

Similar Messages

Link for how to replace the clock battery on Compaq Presario 1247 laptop

Once upon a time I had a link to a manual that provided instructions on how to get to the motherboard for the purpose of replacing the clock battery on an old Compaq Presario 1247 laptop. Can anyone provide that link?
This question was solved.
View Solution.

Hi,
This should be the Maintenance & Service Guide you're looking for.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Portege M100 - How to replace the RTC battery?

Hello, the RTC battery of my Portege M100 is flat. I manage to order one from the internet but I can't locate it. I dismantle almost every part of the computer, but if someone could just guide me and give the procedure du replace it, it would be great. Thanks in advance!!

Hi friend,
its easy to replace the RTC battery on your machine. I did it already and I had no problems during the replacement, I mean it was a little bit tricky to find the batt. but I will give everything from my experience. ;)
Look first at the wireless lan card, theres a slot an under the slot is the minipci-wlan-card located. Near the wireless lan card slot is some little cover, this cover must be removed (gently). The RTC battery is located in some white insulator, but before peeling that little battery out, you must disconnect the battery from the mainboard. After disconnecting it, just lift the RTC up and place the new one there.
Thats all, unfortunately I cannot serve you with some pics, so you will have to imagine it by yourself. ;)
Good luck and greets
P.s.: If you feel uncomfortable in replacing the batt, then ask some techie to help you.

Qosmio G50-10J: How to replace the Optical Disc Drive (ODD)?

Hello there,
the optical drive of my Qosmio G 50 is not working properly anymore, it reads only some movie-DVDs, but sadly no videogameDVDs at all, so I cannot instal any games.
The warranty has already expired too. So I wanted to ask if it is possible to change the drive myself, if it is then how should I do it, and if by doing it would the laptop be in
serious risk of getting damaged?
I would be very thankful for every tip and every help you guys can give me!!!
Best regards,
a.z.

Hi
In different cases the ODD replacement is not very tricky.
If you want you can check this forum category.
Here you can find some videos how to replace the ODD on different notebook models:
http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=115
Here is also a nice Youtube channel which provides the instructions how to replace the ODD:
http://www.youtube.com/user/toshibaeuropesupport
But maybe the ODD laser lens is dirty. In my case I could solve similar issue cleaning the laser lens using a cotton-wool tip and alcohol.
But be careful doing this!

How to replace RTC(CMOS) battery in Satellite A50-432

Hi to everyone!
I've a SA50-432: which Satellite model is my notebook?
I should replace the rtc (cmos) battery.
Should I open all my notebook? Or which parts?
Thanks!
Ale.

Hi buddy
In order to replace the CMOS battery you will have to disassemble the whole notebook.
Do you really want to risk this?
I mean the whole notebook should be disassembled in the right direction and you should use the right tools and right order
This is not easy and I would say its impossible without any additional manuals and hardware experience
I recommend contacting an notebook technician this would be the best way because such disassembling is really tricky and there is a high risk that you would damage some other expensive parts like motherboard or display
PS; Why do you want to repalce teh CMOS battery? Did you try to recharge it again?

How to replace remote's battery?

I have a new iMac G5, currently running OS 10.4.6, with Front Row 1.2.2. I can activate Front Row by using the COMMAND+ESCAPE keys, but the remote has no effect. I tried to use the remote to pause/play in iTunes with no luck - so it looks like the battery is the culprit.
Is this a user-serviceable repair? I can't find any technical article on how to replace the battery - or is this something that only Apple can do?
Thanks for any wisdom anyone may have.

Replacing the battery is easy. Take a pen and click the dimple in the end of the remote, a drawer will pop out with the battery in it.
Kevin

How to replace logic board battery ?

How to replace the Logic board battery ?

Several years ago, when the link went to a different content page and was
likely more useful to someone whose product may have/had warranty, then
it was of help. Now, to look back on several older posted links and click on
them, quite often will take the participant to http://www.apple.com/support/
no matter what the initial out-dated a link originally appeared to suggest.
Current info and links to sources may be found in the Support site.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
For other regions or countries, see Apple - Find Locations - Country selector:
https://locate.apple.com/country
re: Sales, Service, Training, Certification, Consulting; varies per region.
An Authorized Apple Service Provider may also be capable of restoring
function to older hardware; though getting replacement new parts is an
issue going forward, as it always has been, given new product change.
For other repairs, one should look to Specialists and that includes repair
companies whose only business is primarily to restore function to Macs.
A few examples exist, one of them is wegenermedia.com for portables;
since they can be more easily/less costly shipped than desktop models.
To post a comment to a stale and outdated thread, brings little to the table
of discussions; any issue from two to five years ago is not current today in
the fairness of those persons original to the topic thread. A newer issue by
any player should be presented in a new discussion topic thread.
In any event...
Good luck & happy computing!

Hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

hp 7 voice tab screen broken unfortunately. tab is under warrenty.. how to replace the screen

Hp india have bad service ever. I hv order three notebooks ' hp 15-ac026tx' before five days for firm. Distributior open the boxes. But at the time of installation not single driver supporting to 2gb graphics card. As distributor made with Hp support they replied the engineer will come to ur place soon. But still no one has come. And im going to cancel this order and will prefer other compony.

How long does the MBR Battery last in years? Deciding factor on purchasing? Help?

I'm nearly ready to pull the trigger and get my first MBR 15 inch, but something keeps nagging. The Battery. THE BATTERY. Yes the battery is relatively nice, and one might think insignificant in the grand scheme, but IT'S GLUED INSIDE THE COMPUTER, and basically IRREPLACEABLE unless you pay some ridiculous cost, my guess is around $400. So how long is the battery expected to last? 4 years? No battery lasts 4 years. It's mind-boggling to me why Apple decided to glue the battery. After 2 years of moderate to heavy use of your MBR you're just expected to fork over $400 for a new battery? A NEW BATTERY?!!!!! Realistically how long will the MBR battery last before it gives up the ghost and has to be plugged in 24/7?

It is not "glued" inside the computer. And yes Apple offers a replacement program for $200 and under depending on the model for out of warranty:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
For in warranty for a defective battery, it is free:
https://www.apple.com/batteries/replacements.html
AppleCare can be bought at discount during the first year of computer ownership from:
https://www.lacomputercompany.com/cgi-bin/rpcart/featured.cgi?group=appcare
Just remember to register it after receiving the box, and keep all the material inside, including the registration number until you get your enrollment number.
How long? Depends on usage:
http://www.apple.com/batteries/

How to enter the BIOS settings on my Satellite L50-A-k4W?

Help me pls!! How to enter the BIOS settings? I do not know, and Google does not help me =((

At first you have to perform an complete shutdown.
Here an HowTo:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
The point is that Win 8 does not shut down the notebook but the unit performs hybrid shutdown to boot faster. So unit needs to be shut down in order to access the BIOS.
Start notebook again and press F12 to enter boot menu. Thee you can find option for BIOS settings. You can also try with F2 at start up.

How to remove the BIOS password on Satellite Pro M10

Hi
any body can help me to fix my problem with my Satellite Pro M10?
Need power on password.
I try to entering the old password but it can't accept.
I was trying to used dongle with DB25 port, but it can't successfully.
I have removed the BIOS battery; not my problem out
There is any body can help me?
thank's
Irwan

Hello Irwan
As you can see there is no much to do and only service can help you. I am really wondering that people here believe that removing CMOS battery will help. It is not the desktop and some things on laptops work a little bit different.
One more thing for you and all people who want to remove BIOS alone. BIOS password removing procedure is not the same for all notebook models. For some models it is so complicated and works similar like on mobile phone. To delete existing password you need to enter special generated code using special tools.
Please contact nearest service provider in your country and they will help you. If the notebook is your private property and if you are owner it should not be the problem.

How to replace the root tag in ABAP Mapping

how to replace the root tag with the certain string in ABAP Mapping
just like
<?xml version="1.0" encoding="UTF-8"?>
<root>
<name>Lawrence</name>
</root>
into
<?xml version="1.0" encoding="UTF-8"?>
<myRootElement>
<name>Lawrence</name>
</myRootElement>
i don't want to implement it in message mapping
please give me the sample code
thanks in advance

Use below code
odocument = ixmlfactory->create_document( ).
msgtype = odocument->create_simple_element(
name = 'myRootElement'
parent = odocument ).
Thanks
Praveen

Satallite A100: How to replace the keycaps?

Is there a manual on how to replace the keycaps after they come off?
My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
Thanks!

Hello Mike
Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
I have done the same now and with a little bit patience you can put it in the right position again.

How long is the iPad battery last while watching video on YouTube with 3G?

How long is the iPad2 battery last while watching video on YouTube with 3G?

My iPad 2 battery can use only ~7 hours 15mins when surfing the web using cellular data network. Is it normal?
I would say that's normal. Cellular uses more power than wifi. Your screen brightness is also a factor. Lower the screen brightness & battery will last longer.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

How to replac the BIOS battery on notebook MSI GE70

Similar Messages

Maybe you are looking for