HOW TO REPLACE CHARACTER IN JTextField WHEN THE USER TYPES

hOW TO OVERWRITE THE EXISTIG CHARACTER IN THE jtEXTfIELD INSTEAD OF INSERTING IN A jtEXTfIELD ?
ANY HELP IS APPRICIATED

Your keyboard is broken. I suggest you fix it if you want help in the future because using capital letters appears like "SHOUTING" and we don't like to shouted at.
Anyway you wouldn't use a DocumentListener, because the Document has already been updated by the time the Document event has fired.
You might be able to use a DocumentFilter, which is also discussed in the above tutorial.
Or, you can search the forum for my "Overtype TextArea" (without the spaces) example that may do what you want.

Similar Messages

How can I make a JButton enabled when the user types smthg in a JTextField?

Hello,
I have a JButton and a JTextField on a frame. The JButton is disabled, myButton.setEnabled(false).
How can I enable the button when the user types something in the text field? Just typing, not pressing enter.
Thank you

There isn't one, actually. What you need is a DocumentListener and you have to associate it with the document object associated with the field i.e.
field2.getDocument().addDocumentListener() (new DocumentListener() {
});

How do I call a method when the user clicks on the delete button?

Hello , I need to implement the following :
If date from is less than sysdate , when the user clicks the "delete" button , he is shown an error message .
Can you please help how this can be done ? Thanks.

Thanks. What are the steps for adding a custom delete button ?
Are these ok ?
1 ) Add an adf button
2) Add the following in the actions listener : #{bindings.Delete.execute}
3) Right Click button --> create method binding for action
4) Compare date ?
Thanks.

How to debug a RFC function when the user is non-dialog type? Please help!

hi Experts,
I am calling a RFC FM residing in B from R/3 system A.
R/3 A -
Call FM residing in B----
> R/3 B
The user attached to the remote destination is a non-dialog type.
I cannot change the user type of this user.
Therefore how to debug the RFC FM in System A?
Are there any alternatives?
Please help
Thanks
Gopal

in your RFC FM, code an endlees loop.
something like:
data: gv_x type xfeld value 'X'.
do.
if gv_x = space.
exit.
endif.
enddo.
now you can catch the mode in TA SM50, go in it, change gv_x to space and debug what is coming further.

How to show list of items when the user pressed tab key in an empty field

Hi all
i would like to know if there is a way to open a form with items list which will be shown to the user when he pressed the tab key within a field for instance "item code" field will present a search form with a table filled with item codes and their description.
i'm currently working in 2004 version. i know how to catch the event.
i'm creating a form with a matrix object binded to a datasource which is connected to the data base table which contains all the items.
what would like to know if there is a better way to this. maybe using buisness partner objects. and if so how
appriciate the help
Yoav

You Should use Formatted Search in this case.
You must create and associate a query for your field.
click on the field you want items to be listed and press Shift + F2
catch the keydown event of this field and check pval.charpressed = 9 (tab key press)
then execute
SBO_Application.SendKeys("+")

Forms: how to make it so that when the user clicks something, another form pops up?

Sorry if that's confusing, but like how for example, you have:
ADDRESS: _________________________ +another address
& then if the user typed in information into the address field and wanted another address, it would look like:
ADDRESS: __________________________
ADDRESS: __________________________ +another address
& so on... is there a way to do this?

What you want is something like this
http://dynamicdrive.com/dynamicindex16/chainedselects/index.htm

How can I create a scrolling effect where when the user scrolls down the image will blur out?

How can I create a scrolling effect where when the user scrolls down the image will blur out?

Hi there,
You can create a scroll motion where the image will fade out on scrolling, you need to use the Opacity tab under Scroll Effects Panel.
If you particularly need the image to be blur out, then you need to edit that image in any image editing program and make one copy of that image as blurred, then place both images (actual and blurred) on that page and use scroll motion or fade option to replace images.

How do I sign my VB / VS 2010 based shared COM add-in for Excel so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?

My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

How to clear text fields when the user navigates back to the screen

Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
Thanks

This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.containers.FormItem;
      import mx.controls.TextInput;
      import mx.events.IndexChangedEvent;
      import mx.core.Container;
      private function clearSreen(evt:IndexChangedEvent):void{
        var view:Container = tn.selectedChild as Container;
        for each(var child:Object in view.getChildren()){
          if(child is FormItem){
            var subchild:DisplayObject = child.getChildAt(0);
            if(subchild is TextInput){
              TextInput(subchild).text = "";
    ]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
    change="clearSreen(event)">
    <mx:Form id="frm1" label="View Number One">
      <mx:FormItem label="First name:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Last name:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
    <mx:Form id="frm2" label="View Number Two">
      <mx:FormItem label="Address1:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Address2:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="City:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="State:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Zip code:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to preven JButton of generated actions when the user keep pressing down

How to preven JButton of generated actions when the user keep pressing down the key or the short cut
The code below to show the issue when the user keep pressing Alt+ O
We want to prevent the JButton from generating multi actions just one action only
A sample of code shows the behaviour which has to be prevented. Continue pressing "Alt +O" and you will see the standard ouptput will print time stamps
Please notice, I am NOT interested in Mouse press which has a solution by adding a threshold ( setMultiClickThreshhold(long threshhold) on the JButton as an attribute.
public class TestPanel extends JPanel
   private JButton btn;
   public TestPanel()
      btn = new JButton("Open");
      this.add(btn);
      registerCommand(new MyAction(), InputEvent.ALT_MASK,
            KeyEvent.VK_O, btn, btn.getText(), 0);
   public static void registerCommand(AbstractAction action,
         int mask,
         int shortCommand,
         JComponent component,
         String actionName,
         int mnemonicIndex)
      InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
      KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
      if ((component instanceof AbstractButton)
            && mnemonicIndex >= 0
            && mnemonicIndex < actionName.length()
            && (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
         ((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
      if (inputMap != null)
         ActionMap actionMap = component.getActionMap();
         inputMap.put(knappKombination, actionName);
         if (actionMap != null)
            actionMap.put(actionName, action);
   public static class MyAction extends AbstractAction
      private static final long serialVersionUID = 1L;
      @Override
      public void actionPerformed(ActionEvent e)
         System.out.println(System.currentTimeMillis());
   public static void main(String... args)
      SwingUtilities.invokeLater(new Runnable()
         public void run()
            JFrame frame = new JFrame("Testing");
            JPanel panel = new TestPanel();
            frame.getContentPane().add(panel);
            frame.setPreferredSize(new Dimension(500, 500));
            frame.setMinimumSize(new Dimension(500, 500));
            frame.pack();
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setVisible(true);
}Edited by: user12130673 on 2013-feb-13 03:01

Use KeyStroke getKeyStroke(int keyCode, int modifiers, boolean onKeyRelease) with onKeyRelease=true instead?

How do i fix my ipod when the screen cracks

how do i fix my ipod when the screen cracks

Have Apple, a third-party place or fix it yur self.
Apple - Support - iPod - Repair pricing
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
DigiExpress.us - The iPad Repair Professionals
iPod Touch Glass Replacement

How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
I can't also delete.

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore.

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore. please help i just had it for half a day.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

HOW TO REPLACE CHARACTER IN JTextField WHEN THE USER TYPES

Similar Messages

Maybe you are looking for