How to replace child's face with closed eyes?

Using Aperture 3.....I have a great photo of my family, however one child's eyes are closed. How can I replace her closed eyes with another shot of the child with eyes open? I've toyed around with the adjustments and can't figure it out! Please help!

Pretty sure that you are only going to be able to do this via another application that allows you to have layers such as photoshop or gimp.
Tony

Similar Messages

How to replace # or Not assigned with blank in BEx Query Output.

Hi,
While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
The requirement is to "Replace # or Not assigned with a blank" in the output.
I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
Please share your inputs on this. Any inputs on this would be appreciated.
Thanks,
Naveen

Check out SDN-thread: "Re: Remove 'Not assigned'" for more details
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM

How to replace typewriter (straight) apostrophe with typographic (curly) apostrophe?

I have a manuscript I got off the Internet that has a bunch of isn?t's and wasn?t's and the like—due, I assume, to some miscommunication between MS Word's automatic curly quotes and the ASCII limits of ISO Latin 1. I tried doing a find-and-replace to put typographic apostrophes in place of the question marks. Pages found the question marks and put typewriter apostrophes in place of them, though I'd carefully entered a typographical apostrophe ((opt-shift-]) in the Replace field. So I tried again, to replace the typewriter apostrophes with typographical apostrophes. Pages now replaced the few typographical apostrophes I'd manually entered with typewriter apostrophes. Well, at least it's consistent. So far as Pages, Apple's flagship word-processing/page-layout app is concerned, there's apparently no such thing as a typographical apostrophe—something that was understood, as I recall, by the original MacWrite 25 years ago. So do I have to go back to doing all my editing in TextEdit (which seems to be much better at text work than Pages), or can somebody tell me how to persuade Pages to take care of this trifling little task correctly?

Copy these two paragraphs into a Pages WP document:
When you?re sleep deprived… parental control of baby?s sleep… meet baby?s needs consistently… respond to baby?s cries…
"Parents should recognize that having their babies cry unnecessarily harms the baby permanently," Commons said. "It changes the nervous system so they?re overly sensitive to future trauma."
Open the Find & Replace dialog. Enter Find: ? and Replace: ’ (opt-shift-}). (I.e. replace question mark with typographical apostrophe.) Click Replace All. It should say 5 Replaced. Check any of the replacements by enlarging the type; you’ll see an ASCII apostrophe ['] rather than the requested typographical version [’].
Then enter Find: " (space-") and Replace: “ (space-opt-[), and click Replace All. It will say 1 Replaced, meaning the quote mark preceding "It" in the second sentence (the only quote mark preceded by a space). Enlarge the replacement to see it clearly; it's replaced an ASCII " with another ASCII ".
So far as I can tell, Pages’ Find-Replace function can't tell the difference between ASCII apostrophe/quote marks and the typographical versions. Maybe it will once you turn on smart quotes in preferences; I haven't tried that -- but then of course you'd get smart quotes when you don't want them, for instance for something to be posted on an Internet forum, which often doesn't understand them. (The problems above and similar, often seen on the 'Net, are due to MS Word's having smart quotes on by default, so unaware users compose material with them and send it out over teh Interwebz, where they sometimes come through correctly, sometimes don't.)
Try the same experiment in TextEdit; you'll get the requested typographical versions. And so I did, then copied the text back to Pages. Like I said, kinda shoddy for Apple's Pride & Joy word processor. AppleWorks, by the way, does it right.

How to replace a particular striing with another string in jtextpane

how to get replace a particular string with another string of a jtextpane without taking the text in a variable using getText() method .

Thanks for your answer,
"relevant object" means for you datasources, transfer rules and transformations ?
With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
Will I have to pick all object one by one ?
What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
Regards
Guillaume P.

How to replace JMS Msg id with My own customer ID??

Hi Frnds,
I am working one one scenario using JMS Adapter, when i am placing message in Quese,JMS adapter genarating MSG msg id,but i ahve to add my own id its custiomer specific,how to replace JMS Msg id??
thanks,
Raj

Hi,
found this in SAP help:
Correlation Settings
Define which algorithm is to be used to create the message ID of a new XI message. The prerequisite for selecting an ID is that it is a GUID (globally unique identifier) according to ISO-11578.
If the message ID is not a GUID, message processing will fail. This can cause message duplicates if the ID is not unique. Furthermore, if the GUID does not conform to ISO-11578, this can trigger a GUIDFormatException.
Set XI Message ID (MessageID) To:
-         GUID (Recommended Value)
-         JMSMessageID (Uniqueness Is JMS-Provider-Dependent)
-         JMSCorrelationID (Uniqueness Is JMS-Sender-Dependent)
-         JMSProperty (Uniqueness Is JMS-Sender-Dependent)
Enter the JMS Property Name. This value is set for the XI message ID.
If the JMSCorrelationID or JMSProperty are not set in the JMS message, a message ID is generated automatically.
If you have selected JMSMessageID, JMSCorrelationID, or JMSProperty and entered a JMS message ID in these fields, you should see the Remove 'ID:' Marker from JMSMessageIDindicator. Set the indicator.
This is necessary because the JMS specification stipulates that each JMS message ID starts with 'ID'. However, this conflicts with ISO-11578.
Set XI Conversation ID (ConversationID) To:
-         No value
If you choose this setting, the XI conversation ID is not set.
-         JMSMessageID (Uniqueness Is JMS-Provider-Dependent)
-         JMSCorrelationID (Uniqueness Is JMS-Sender-Dependent)
-         JMSProperty (Uniqueness Is JMS-Sender-Dependent)
Enter the JMS Property Name. This value is set for the XI message ID.
-         Stored JMSCorrelationId of request
The saved JMSCorrelationID of the request is used.

How use replace all grid row with variable value

hi master
sir i have master detail form
in detail form i have 5 column grid thate have 25 row at time
one column name id
such as id have value 23
but i want replace all id row with 555
how i replace all id in grid with 555 befor commit_form
how i use loop for grid
or any other method
please give me idea
thank's
aamir

Go_Block('Detail');
First_Record;
Loop
:detail.item := '...' ;
Exit when :system.last_Record = 'TRUE' ;
Next_record;
End loop;
First_Record ;Francois

How to replace one double quotes with two double quotes in XSLT

How can I replace one double quote to a two double quote in a string in XSLT
I am passing the parameter string to XSLT template contains the value as
<xsl:variable name="Description">Hi! "How are you</xsl:variable>
<xsl:variable name="VQuotes">""</xsl:variable>
I nead the output as
Hi! ""How are you.
Tried with Translate function, but it did not work out
<xsl:element name="DESCRIPTION_SHORT">
          <xsl:value-of select="translate($Description,'"', VQuotes)" />
        </xsl:element>But it is giving the same result as Hi! "How are you
When I tried with
<xsl:element name="DESCRIPTION_SHORT">
          <xsl:value-of select="translate($Description,'"', 'BB')" />
        </xsl:element>
It gave the result as
Hi! BHow are you.
It is replacing only one character with one. how to make it for two characters.
Am I doing anything wrong in syntax?
Please help.
Regards, Vignesh S

Hi Vignesh,
Try this.
Its a two step process:
Step1: Add the following template would be "called" to do the replacement as your want:
<xsl:template name="string-replace-all">
<xsl:param name="text" />
<xsl:param name="replace" />
<xsl:param name="by" />
<xsl:choose>
<xsl:when test="contains($text, $replace)">
<xsl:value-of select="substring-before($text,$replace)" />
<xsl:value-of select="$by" />
<xsl:call-template name="string-replace-all">
<xsl:with-param name="text"
select="substring-after($text,$replace)" />
<xsl:with-param name="replace" select="$replace" />
<xsl:with-param name="by" select="$by" />
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$text" />
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Step2: Call the above templeate in the place where you want to call, like this:

<xsl:variable name="Description">Hi! "How are you</xsl:variable>
<xsl:variable name="sQuotes">"</xsl:variable>
<xsl:variable name="VQuotes">""</xsl:variable>

<xsl:element name="DESCRIPTION_SHORT">
<xsl:variable name="myVar">
<xsl:call-template name="string-replace-all">
<xsl:with-param name="text" select="$Description" />
<xsl:with-param name="replace" select="$sQuotes" />
<xsl:with-param name="by" select="$VQuotes" />
</xsl:call-template>
</xsl:variable>
<xsl:value-of select="$myVar" />
</xsl:element>
I have tested this and works. And outputs as the following with two-double quote as you want.
<DESCRIPTION_SHORT>Hi!
""How are you</DESCRIPTION_SHORT>
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to replace a specific color with transparent color?

I would need to get image of a control but I'd like to replace the background color of the control with transparent color (like the commentest image editor).
I cannot use IMAQ library, so I would like to use 2D-picture palette.
I can read the image data pixel per pixer, but.. once the color to be replaced is found, how to replace it with transparent?
Thanks all

It sounds like you want the "Create Mask.vi". If not, you might want to provide some code that shows what kind of situation you're dealing with.

How to replace the Losing fonts with scrip in photoshop,by script

Frequently，I Receive some PSD files, It is did by Other people.
When I open it with my computer,I find it missed a lot of fonts.
Some times,I have this fonts, but the name is not like with the fonts of the PSD file.
So,I need to replae the Losing fonts, but it always have a lot, It wast my much times.
In Indesign, it is Very easy~~
Could you help me Achieve it by scrip in Photoshop?
Thank you very much

Hi Sridhar,
I would like to Replace the Charecter values with numeric value in my string.
Exp : first in my string I am having the value like this : 'ABCD1234' ( may be any char and num values ), and I want too get it by '99991234'.
So, if i understand you correctly, you want to replace all characters in a string with 9 as in the above example, irrespective of position of the character, if so try with the below code.
DATA: l_str TYPE string.
l_str = 'ASKHSIUDNSBDKJSDH124312431243124saasdfsf'.
REPLACE ALL OCCURRENCES OF REGEX '\D' IN l_str WITH '9'.
IF sy-subrc EQ 0.
WRITE: l_str. "Result will be 9999999999999999912431243124312499999999
ENDIF.
Regards,
Chen
Edited by: Chen K V on Jun 13, 2011 12:36 PM

HT3302 I just need to know how to replace a cracked screen with out a warrenty?

I just need to know how to replace the screen on an Ipod touch that is not under warrenty.. Can anyone help?

From the article you linked:
http://www.apple.com/support/ipod/service/faq/

How to replace a paragraph style with object style

Hi,
I am having this issue lately that in paginating a newspaper I have to do all premium post with a Rectangle Border. the problem is that the text is in the grid.
Is there anyway that, while I add a specific paragraph style to some parts of the text, I can automatically give this text a specific Object Style (like stroke rectangle)
Does it make sense?
Thank you very much

Michael,
I think that I did not explain myself as I should have. The problem is not really related to links but more of a automatic replacement issue.
Every time I do this newspaper I include a new text information and the location of the Headers changes in every single case.
http://i.imgur.com/sgQ2wIK.jpg
In the link, the blue paragraphs need to be replaced with the respective Header Icons that you see on top and everytime this location of the headers in the newspaper changes due to the different number of posts in each specific category. Now the problem is related on how to autoaticaly replace this string in blue with its respective header
thanks a lot in advace for all your help

How to replace a qualified table with Tuple

Hi Experts!
I have a Qualified table woth 2 non qualifiers,which refer to 2 lookup flat table and one text field which is Qualifier.
Now I want to replace this design with tuple.Please give me steps to do so and also how is the linking of field relation maintained in Tuple.
Thanks
Ravz

Hi Ravz,
Please refer the complete section 5. Migrating from Qualified Lookup Table to Tuple
Here, must check Page No 48/58 example for converting Qualified tbale to Tuple. It will solve your problem.
Sample: Manufacturer Part Number (MPN) in standard Products repository
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80765a21-78f3-2b10-74a2-dc2ab57a1bd2?quicklink=index&overridelayout=true
Regards,
Mandeep Saini

How to close open hi-hat with closed hat (Ultrabeat)

I loaded the 2 samples but can figure out how to mute one sound with the other.....help
thanks in advance

hi peter
the group setting is small and hard to see, and easy to miss. looking at ultrabeat, go all the way to the right of center, you'll see ther name Ultrabeat, below is a round dial and below that is the settings for trigger and group. Put all your hats in the same group and next note cuts off the first, closed hat closes the open hi hat

LabVIEW2009: How to replace new Icon Editor with old one?

Colleagues,
I really don't like the new icon editor introduced in LabVIEW 2009:
That was nice attempt to make "embedded Photoshop" with lot of features:
But I really don't like it, because:
- it opened EVERY TIME on the RIGHT monitor (I have three monitors, and primary monitor in the middle)
- it takes lot of time for launch (old icon editor was started momentally)
- from usability point of view - it was wrong to place tools on the right side. Commonly they located on the left side (and only in old icon editor, but also in imageprocessing software like Adobe Photoshop). Also front panel UI design... hmmm... this can be better...
- some bugs or changed functionality (for example - select ROI, then press <Del> button - nothing happened)
etc...
Is it possible to replace it with old one:
Ideal solution will be - simple switch between both editors (some introduced features are not so bad).
Thanks in advance,
Andrey.
Message Edited by Andrey Dmitriev on 01-29-2010 11:00 AM
Solved!
Go to Solution.

Go into <LabVIEW>\Resource\Plugins and rename lv_icon.vi. This is the plugin that's called when you invoke the icon editor, and if it's not there, LV reverts to the built-in editor (at least today. I'm not sure how many versions ahead they will keep the code).
You should note that the editor is open source, so you can go in and change what you want (or save yourself time and use the changes others have made, such as PJM's thread here. You may also want to look at the other discussions in that group).
Try to take over the world!

How to replace huge decode statements with lookups to some simple code/key

I have a legacy PL/SQL application, composed of many very huge decode statements. And the most terribe one is that the guys who develops the application left the company now, leaves no documentation.
We are trying to read and understand those PL/SQL programs, and I'm asked to replace those huge decode statements with lookups to some simple code/key tables? But I have no idea about how to design such code/key tables. Is there any one who has similar experience may help me? Besides code/key tables, any idea will be welcome.
Thank you very much!

Not sure what your data looks like but sometimes decode can be replaced with more appropriate functions, ie;
SQL> with t as (
   select 'DAY' a, 30 b, null c, null d from dual union all
   select null a, null b, 'MONTH' c, 12 from dual)
select coalesce(b,d)
from t
COALESCE(B,D)
           30
           12
2 rows selected.
SQL> with t as (
   select 'DAY' a, 30 b, null c, 0 d from dual union all
   select null a, 0 b, 'MONTH' c, 12 from dual)
select greatest(b,d)
from t
GREATEST(B,D)
           30
           12
2 rows selected.

How to replace child's face with closed eyes?

Similar Messages

Maybe you are looking for