How to replace curved apostrophe with straight apostrophe?

How do I search/replace for curved apostrophe to straight apostrophe?
How do I search/replace for curved open and close quotes to straight quotes?
I have smart quotes turned off (which turns ON curved apostrophe).
The source material was copied and pasted from email which is why the quotes are straight.
Thanks.

David, I can't imagine doing anything inside Word is easier.
Courtesy of Mike Wickham, these are the characters to use INSIDE search/replace boxes:
You can use these hex values inside the find dialogue. They can be found in the "FrameMaker Character Sets" PDF, which came with your software or can be found online.
\x22 = straight quote
\x27 = straight apostrophe
\xd4 = curly left single quote
\xd5 = curly right single quote (apostrophe)
\xd2 = curly left double quote
\xd3 = curly right double quote
Typing in the document itself, Esc+" produces a straight double quote and Ctrl+' produces a straight single quote (apostrophe).
Courtesy of David Artman:
Curved apostrophe Find: ALT+0146 (’)
Curved quotes Find: ALT+0147 (“) or ALT+0148 (”)
After this issue, I googled for FrameMaker Character Sets and downloaded it. That would be my future recommendation for everyone.
Thank you all for your help!

Similar Messages

How to replace a movieclip with another movieclip

How to replace a movieclip with another movieclip
Hi,
I am having a swf called tchild.swf... in this i got a
movclip 'child1'. i am loading this tchild.swf into another swf
tparent.swf within 'mcloader' movie clip.. i got another movclip
called 'picture1'
i am loading tchild.swf into mcloader movclip.. and i want to
load 'child1' moviclip into picture1..
how to replace a picture1 movieclip with child1 mc..
PS: i dont want to load picture1 from library.. its on the
stage.

AWT or Swing?

How to replace key value with character

Hi Experts
Can any one tell me, how to replace key value with character, whether it is possible are not. My present report is displaying below format.
country--city-area-flatnocountry--City-Flatno
Customer--USACOst1111---UK--HD20--
C100--11---11--
C200--11---1--
For the above example format i am able to display. But now i want to replace 1 with character value for example. For C100
country is USA at presnt 1 but it should replace with USA.
You find required format below.
country--city-area-flatnocountry--City-Flatno
Customer--USACOst1111---UK--HD20--
C100--USACOst1111--
C200--UK--HD20--
thanks .
Regards,
Vishal.

Hi Markus,
Thanks for reply,
Actually i dont have attribute for the customer, the data is maintained in ods, in the form, customer name one info-object and customer value one more info-object this value got text. This value stored in the ods as below
costomer number customer value
C100--USA
-C100CO
C100--11-
C200----
UK
C200----
20
Please let me know any clarification you need.
Thanks and Regards,
Vishal.

Find and replace smart quotes with straight quotes?

I understand I can turn off smart quotes so that I can type straight quotes, but I need to replace hundreds of curly smart quotes with straight quotes, is there a feature that will let me do this? I am using FM8.
Thanx,
Willian

I am using FM9....so I don't know if the same shortcuts apply, but this is what I found out last week.
Use the Find and Replace tool:
With smart quotes turned off and the Num Lock key turned on:
Alt0147 will give you beginning quotation marks
Alt0148 will give you ending quotation marks
In the Find box use ALT0147 or ALT0148 for the beginning or ending quotes. When you click in the box and type
one of the shortcuts the correct quote will be shown in the box.
In the replace box type the regular straight quotes on your keyboard.
I was thrilled that it would work!...course you do have to do them separately and be careful not to replace the curly quotes
that you want to leave in your document.
Hope this helps using FM8....
ls

How to replace double quotes with a single quote in a string ?

Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.

Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals.

How to replace the '&' character with '&' in xi

Hi,
i need to replace the '&' character with ' &'.but i f i am converting it is displaying as '&' because internally '&' = '&'.
beacuse of this it is not converting.
is there any possiblity to change the standard conversion in xi.

Graphical mapping does not support special character like & , <,> to be mapped.
You can encode & as and in UTF-8 only.
if you want the special character to be used, Opt XSLT mapping with ISO-8859-1 encoding
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="ISO-8859-1"/>
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
How to Work with Character Encodings in Process Integration (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42

How to replace westell 6100 with westell 327w?

Hi all,
I am currently using a Westell 6100 and I just inherited a Westell 327W from my brother who switched over to FIOS.
Can I replace the 6100 with the 327W? And how do I go about doing that?
Any suggestions or recommendations would be greatly appreciated.
Cheers!

If the 327w has newer firmware on it, you can just factory reset it and then connect it up. Once it is online, visit http://192.168.1.1/ and use admin/password respectively as the login information. Then, set a new password for the gateway.
Once done, visit http://192.168.1.1/verizon/redirect.htm and choose the disable button. Assuming the modem has been able to get a connection at this time, you should be online.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How to replace an MDB with a servlet

I got a situation to replace an MDB with a servlet,How can I do that,more appreciated if u send me some sample code.

Hi,
An MDB can be replaced by a normal java class by doing the following.
Make a jndi lookup for the queue/topic connection factory and then create a javax.jms.QueueConnection. Then create a javax.jms.QueueSession using this connection. Make a JNDI look up for the Queue. Create a javax.jms.QueueReceiver using the created QueueSession. Call start on the QueueConnection and receive a message by calling the receive method on QueueReceiver.
Thanks,
marvlex

How to replace one char with two chars in email address policy?

I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'.
So, how do I replace one char with two chars in email address policy?

As far as I know, your only solution is to manually create such addresses instead of using e-mail address policy.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How to replace the arrow with a custom graphic on a TitledPane?

The TitledPane has an arrow that changes state (rotates) to show whether the pane is collapsed or expanded. Is there a way to replace this arrow with a custom graphic for each state?

Most definitely. Everything in the controls is style-able from CSS. The region you are attempting to style can be addressed via:
.titled-pane > .title > .arrow-buttonSo you could specify images here for example, or you can just change the arrow path by adding another > .arrow on the end. Below I've posted the entire CSS style that is built in for TitledPane so you can see how the whole thing is styled. You can create your own stylesheet, copy/paste this in there, and then start tweaking things and see how it affects the look of the TitledPane.
Cheers
Richard
* TitledPane                                                                  *
.titled-pane {
    -fx-skin: "com.sun.javafx.scene.control.skin.TitledPaneSkin";
.titled-pane > .title {
    -fx-background-color: -fx-box-border, -fx-inner-border, -fx-body-color;
    -fx-background-insets: 0, 1, 2;
    -fx-background-radius: 5 5 0 0, 4 4 0 0, 3 3 0 0;
    -fx-padding: 0.166667em 0.833333em 0.25em 0.833333em; /* 2 10 3 10 */
.titled-pane > .title > .arrow-button {
    -fx-background-color: null;
    -fx-background-insets: 0;
    -fx-background-radius: 0;
    -fx-padding: 0.0em 0.25em 0.0em 0.0em; /* 0 3 0 0 */
.titled-pane > .title > .arrow-button .arrow {
    -fx-background-color: -fx-mark-highlight-color, -fx-mark-color;
    -fx-background-insets: 1 0 -1 0, 0;
    -fx-padding: 0.25em 0.3125em 0.25em 0.3125em; /* 3 3.75 3 3.75 */
    -fx-shape: "M 0 0 h 7 l -3.5 4 z";
.titled-pane:collapsed > .title > .arrow-button .arrow {
    -fx-rotate: -90;
.titled-pane > *.content {
    -fx-background-color:
        -fx-box-border,
        linear-gradient(to bottom, derive(-fx-color,-02%), derive(-fx-color,65%) 12%, derive(-fx-color,23%) 88%, derive(-fx-color,50%) 99%, -fx-box-border);
    -fx-background-insets: 0, 0 1 1 1;
    -fx-padding: 0.167em;
.titled-pane:focused > .title {
    -fx-color: -fx-focus-color;
.titled-pane:focused > .title > .text {
    -fx-text-fill: white;
.titled-pane:focused > .title > .arrow-button .arrow {
    -fx-background-color: white;
}

How to replace missing fonts with a specific font (and not a suggested font)

Hello all!
Looking to replace missing fonts within my document - but the drop-down selection only gives a couple of suggestions, none of which are the font I want to use.
How can I replace the fonts with a font of my choosing?
I've attached an image to give more clarity - notice how the drop-down only gives the option to select between 3 fonts without an option to select your own font - many thanks!

Same problem! The only solution I found is to prepare a textbox in a new file with all the font you need. Copy and past in the file you need to change font. Go to type/risolve missing font. Will open the same window in the pic you pasted. Then you find the font in the dropdown menu. I have to change all the Helvetica family ...it's a long go. If some one could save me. Hope to be usefull to your problem.

How to replace one variable with another in large number of queries

Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!

you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

How to replace SAP logo with customer logo

Hi Gurus,
How to replace or insert a customer logo when creating input schdules EvDRE function.
Cheers,
Reddy.

Reddy,
You shld be able to copy and paste your logo (after deleting the SAP logo). ..as you would do in regular excel. If sometimes it doesn't work...use the insert picture functionality......regular excel/MS way.
Hope this helps.
Vishal.

How to replace blank spaces with zero's in the report

hai sdn guys,
we have a requirement where we cannot have any blank fields in the report and i need to replace the blanks with a zero. What is the best way to do it.

Hi Sunitha,
It is not proper that you are posting the same question multiple times:
Re: report o/p should not have blank spaces in - in case of no value
should get 0's in place of blank value in the output of the report
That too inspite of my requesting you not to do so.
I am not sure if you have ever gone through the Rules Of Engagement which are prominently posted in each forum, but I think it is SDN courtesy to provide proper feedback when posting a question and assign points as deemed fit. This helps (and motivates) everyone to work on your problem and try to give you a solution. I hope you will be more careful in the future. Thanks!

How to replace special characters with html code characters automatically?

A colleague and I work on these html pages. They eventually end up as emails, but we have the cold fusion server to pre process them. One thing we are trying to do is eliminate problems caused by unencoded copyright, trademark and smart quote symbols.
How could I create an array of find / replace commands in the header so it processes the HTML with correct character codes.
I"m not cold fusion aware, so any kind of starter info would be great. Eventually I might add more replacements to the array.
As an example TM (font character) would process to ™ and a smart quote or apostrophe would process to a straight one. an en dash character would become –
Because we copy paste from places, this often happens and it seems like cold fusion could solve the problem quickly and repeatedly all at once.
thanks for any help
-smick

CF has a built in HTMLEditFormat function for handling < & > characters. For handling trademark and smart quote characters you might try searching for a user defined function at http://cflib.org or writing a user defined function yourself that will handle the specific characters needed in your application.

How to replace curved apostrophe with straight apostrophe?

Similar Messages

Maybe you are looking for