How to replace dot to cama

Hi Friends,
My field(menge-qty) contains data like 12.34 123.45 etc.
and lenth of the field is 13 type is qty.
i would like to change that 12,34 123,45 etc by replacing point with cama.
How to do this.
thanks,
maha.

Hi,
Move the value to a string..and then use the REPLACE ALL OCCURENCES statement to replace dot with comma
Thanks
Naren

Similar Messages

How to replace hard drive and transfer everything over?

I've looked everywhere but am unable to find a definitive guide on how to do this.
Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Satallite A100: How to replace the keycaps?

Is there a manual on how to replace the keycaps after they come off?
My Satallite A100, one year old, lost two keycaps a few weeks ago, and I am unable to replace them, although I have all the (little) parts. It got even worse when some more came loose recently when my little son peeled some off, using the room created by the already missing keycaps.
Thanks!

Hello Mike
Reading your posting I can not understand exactly what is wrong with your keyboard but removing and putting in place keycaps (plastic with written symbol) is not problematic. You must just put it right in place and gently press it down. You will hear click and the keycap will be in the place again.
Under this keycap is placed small plastic mechanism. It contains two small plastic parts. If they are removed from the bottom you can put them inside again. To see how it looks like remove keycap from any other key and see how is it placed.
I have done the same now and with a little bit patience you can put it in the right position again.

Left command key has broken off - how to replace?

So a few days ago I caught my left command key with my nail and the top half of it lifted away from the mechanism underneath. I pressed it until I heard it click back into place and then merrily continued using my computer as usual. Today I was typing and the whole thing just came off under my thumb, which is annoying to say the least.
The biggest issue is that as I was trying to reconnect key to mechanism, the little criss-cross doohickey came off as well! I am left with a little silicon nipple which, while titilating, is not really conducive to the kind of high volume typing I'm used to!
I really don't want to pay 40 bucks to get Apple Support to replace a single key for me - I just need to know how to do it myself. It's only one key and I could probably learn to get used to using the right one, but it would be easier if I could just click it back into place. It's not broken, the mechanism itself seems fine and the key works if I push the little nubbin, so I'm not concerned about that. I just think $40 is too much to pay someone to click a key back into place! I wasn't even doing anything out of the ordinary with it like trying to remove or replace the keys T^T
I'm especially gutted since I just bought a new iPhone from the same Apple shop I bought my laptop like three days ago - if I'd known my laptop was gonna bust I'd have saved myself the money and spent it on repairs instead! Fml, right?
Any help you folks can offer would be very gratefully received - if it comes down to it and I have to fork out the money then I'll do so, but I'd like to explore community options first on the off chance that someone knows how to replace the mechanism and key without having to lug my computer all the way into the city to get it fixed xD
Thanks in advance!
Ehryn

It's pretty easy to do, get something thin like a credit card and run it along the bottom and sides of the keyboard and there are several bracket things that will pop the keyboard up when you pressure them. There will be a couple of cables to clip out behind it so lift it up gently.
You should be able to find a video on youtube anyway!
Try this site for the keyboard http://www.replacementlaptopkeys.com/toshiba_qosmio_laptop_key.html
It shouldn't be too hard to track a replacement down.

How do you get the camera on the iPhone4 to zoom?

How do you get the camera on the iPhone4 to zoom?

Check to see that it isn't set to video recording (which doesn't zoom). Otherwise you may need to restore your phone to fix this if it's a software problem (http://support.apple.com/kb/HT1414). Restoring replaces the iOS with a fresh copy of the latest iOS.

How to replace NULL values from main table

Dear all,
I like to remove the NULL values from a main table field. Or the question is how to replace any part of the string field in MDM repository main table field.
e.g. I have a middle name field partly the value is NULL in some hundreds of records, I like to replace NULL values with Space
any recommendation.
Regards,
Naeem

Hi Naeem,
You can try using Workflows for automatically replacing NULLs with any specific value.
What you can do is: Create a workflow and set trigger action as Record Import, Record Create and Record Update. So, that whenever any change will occur in the repository; that workflow will trigger.
Now create an assignment expression for replacing NULLs with any specific value and use that assignment expression in your workflow by using Assign Step in workflow.
For exiting records, you will have to replace NULLs manually using the process given by Preethi else you can export those records in an Excel spreadsheet which have NULLs and then replace all NULLs with any string value and then reimport those records in your MDM repository.
Hope this will solve your problem.
Regards,
Varun
Edited by: Varun Agarwal on Dec 2, 2008 3:12 PM

How to connect my dv camera to my mac and make movies?

i just got my new macbook and dont no how to connect my dv camera to it...i got a software disc for my dv cam but it doesnt run automatically and i dont no how to install it....it is usb connection...do i need fire wire?...help me plz help...getting frustrated ...is the any sites that help with macs ..cuz im use to pc...dont no anything bout macs...thanks so much!!!

Hello,
It would be helpful to know what camera you are trying to connect and what exactly you are trying to do with it.
In regards to firewire vs usb i only really have experience with firewire so i can not help you there unfortunatetly.
If you are just trying to get the video footage off the camera you could try and open up iMovie from within you applications folder. Attached the camera, my iMac is currently in for repairs so i can quite tell you the whole thing but look for options of attached cameras.
The reason why the cd doesnt autorun is that it is probably window software, does the disk specifically state Mac OS X?. If you double click on the cd it should open up in a window. Have a look around for any Mac folders or any obvious applications that you can run.

How to replace obsolete download function module in ECC6.0?

Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.

Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
          EXPORTING
               FILENAME            = p_filename
               FILETYPE            = DAT
          TABLES
               DATA_TAB            = T_DOWNL
          EXCEPTIONS
               INVALID_FILESIZE    = 1
               INVALID_TABLE_WIDTH = 2
               INVALID_TYPE        = 3
               NO_BATCH            = 4
               UNKNOWN_ERROR       = 5
               OTHERS              = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename    TYPE string,
       l_filen       TYPE string,
       l_path        TYPE string,
       l_fullpath    TYPE string,
       l_usr_act     TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
    DEFAULT_FILE_NAME    = l_filename
CHANGING
    FILENAME             = l_filen
    PATH                 = l_path
    FULLPATH             = l_fullpath
    USER_ACTION          = l_usr_act
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    NOT_SUPPORTED_BY_GUI = 3
    others               = 4.
IF sy-subrc = 0
      AND l_usr_act <>
      CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = l_fullpath
   FILETYPE                        = 'DAT'
TABLES
    DATA_TAB                        = T_DOWNL
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22.

How to replace double quotes with a single quote in a string ?

Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.

Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals.

How to use the integrated camera in Lenovo THINKPAD X301

Dear All,
I would like to know how to use the integrated camera for the THINKPAD X301 LAPTOP?
Please help

Hi ,
For Lenovo product , we need application software to activate this camera. You can use the Picasa software which can search from Google to activate this camera.
After install Picasa > Picasa > Import > Select Device ( then choose your camera )

How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

same as it ever was
do it like nothing is different.
be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

How to replace multiple occurences of space in a string to a single space?

How to replace multiple occurences of space in a string to a single space?

Hi,
try this code.
data : string1(50) type c,
          flag(1) type c,
          dummy(50) type c,
          i type i,
          len type i.
string1 = 'HI READ    THIS'.
len = strlen( string1 ).
do len times.
if string1+i(1) = ' '.
flag = 'X'.
else.
if flag = 'X'.
concatenate dummy string1+i(1) into dummy separated by space.
clear flag.
else.
concatenate dummy string1+i(1) into dummy.
endif.
endif.
i = i + 1.
enddo.
write : / string1.
write : / dummy.

How to replace/remove/change font color of a character at in output

Hi all,
I am using rtf template to get the output of a report, however i have a condition for field "Narratives" where if field A contains 'X', I need to either get rid of the 'X', replace with '' or change the font of X to white.
Meaning if the output is : My Name is BavaniX
I need it to look like : My Name is Bavani
I use the BI Publisher desktop tool to create the placeholders. Highly appreciate if someone could advise me on how to replace with '' or change X to white font or remove the X using the BI desktop tool.
The placeholder right now looks like this <?(NARRATIVES)?>.
Thank you.

if you want to replace also look at
How to remove underscore in xml tag
Re: How to remove underscore in xml tag
Edited by: AlexAnd on Aug 2, 2012 5:55 AM

My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back. Thanks so much . . .

My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back. Thanks so much . . .

Do you mean the App Store app on your iPad ? If you do then it can't be deleted, but you might have hidden it via Settings > General > Restrictions > Installing Apps 'off' - if that is 'off' then turn it back 'on' and the app should show on one of your iPad's home screens again

LIVE Video Tutorial! How to Replace and Configure a Video Card - HP Expert Day "How-To" Video Series – Today at 1:00pm PST

Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
I am an HP employee.

#test

How to replace dot to cama

Similar Messages

Maybe you are looking for