How to replace hard drive on hp mini 110 - 1125nr

HP mini 110 - 1125NR
s/n [edited Serial Number by Moderator]
P/N VM135UA#ABA
trying to find out where the hard drive is located.

Hi @von26 ,
Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Similar Messages

  • How to replace hard drive in mini 110-3131dx

     Trying to replace hard drive in the mini 110-3131DX.....  I have a replacement ... How do I open the case.  I see a orange slider bar  in battery compartment,   but no screws to take out or covers to remove.  It has a solid no opening base except where the battery is removed.
    Thk
    This question was solved.
    View Solution.

    You're welcome, Tim.
    What operating system are you installing on the machine?
    The specs state it shipped with W7 Basic.  That OS should load without issues.
    If you are trying to install XP, it will not install unless you load the SATA ACHI drivers either at the F6 prompt or you need to slipstream them into a copy of your XP installation.
    If you are attempting to install XP, please read this link below and that should solve that issue.
    Your notebook has the Intel NM10 Express Chipset.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
    Best Regards,
    Paul

  • How to replace hard drive in macbook pro?

    How to replace hard drive in macbook pro?

    Hi S,
    If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

  • How to replace hard drive and transfer everything over?

    I've looked everywhere but am unable to find a definitive guide on how to do this.
    Currently I have an early 2011 MBP that came with Snow Leopard and upgraded to Lion later. It has an HDD and I want to replace it with an SSD and transfer everything over to the SSD. Considering Lion created a Recovery partition (and there is also an EFI partition), I'm confused on how to do this the best way to basically copy my current hard drive to the new SSD.
    The best I've figured out is to connect the SSD with a SATA-USB cable, use the Lion Recovery Disk Assistant ( http://support.apple.com/kb/dl1433 ) to create a Recovery partition on the new SSD, then, booting into Recovery, install Lion on the new SSD, and then use Migration Assistant to transfer all my files over.
    Is there a simpler or better-explained way to basically copy my current hard drive over to a new SSD and then remove the HDD and use the SSD?

    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?

    Hi!
    I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
    "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
    The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
    I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
    Here are my questions:
    1) Can this problem really be solved by just replacing the hard drive?
    2) Can I use SSD this time so my Macbook can run faster?
    3) What SSD is recommended for my late 2011 Macbook 13"?
    4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
    I am looking for other sites as well but I hope this community could share some tips too.
    Thanks a lot!

    I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
    In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
    EDIT:
    I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
    Here's a link to the manual for my model.
    http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf

  • How to replace hard drive

    HP Pavilion Media Center m8277c PC
    I need to reploace the hard drive but cannot figure how to get at it as it is under the Personal Media Drive Bay.
    The cage that all the drives are in is HP 5002-9896 REV B and I do not see a way to get it out.
    Thanks for any help.

    Here are the factory specs for your HP Pavilion Media Center m8277c Desktop Computer. While the support page for your m8277c wouldn't display a link to the HP "Adding or Replacing a Hard Drive" document, I was able to get the link from another computer model. Please see this HP document entitled "Adding or Replacing a Hard Drive" for a model m8047c, which appears to use the same case design as yours.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to replace hard drive bay fan?

    The fan in my G5 tower dual 1.8 Ghz in the top bay - optical/hard drive bay - has started to make noise. I bought a replacement, but I don't see any way to get the old one out. It sits in a little depression in the bay floor, and even if I got out the 3 screws holding it in place, it won't tilt far enough front or back to slide out.
    Anyone know of any write-up anywhere about how to replace this fan assembly?

    Those two fans (media bay fans) are only given a mention in the "official" service manual.
    The drive fan and blower located between the optical and hard drives cannot be
    replaced. You must replace the enclosure for these two parts.
    Does this mean the "entire" enclosure, as in the tower, or just an enclosure for the fans held to the tray of the media bay?
    I don't know.
    Maybe someone who has done this can offer advice, but it seems that there is a need for someone to write a manual for that procedure.
    Message was edited by: japamac

  • How to replace hard drive on MacBook?

    I need to replace the hard drive on an older MacBook...how do I go about doing this?
    I'm pretty sure I just need to buy a new one, but don't know if it has to come from the Apple store.
    When I was last at Apple, they told me I could probably have it done at Best Buy.
    Please help...I'm not very computer savvy.

    You can find replacement drives plus installation tutorials at OWC.

  • Please, how to replace hard drive envy 15-k112nl

    Hello everyone, I bought this model a few days ago and I would like to replace the hard drive with an SSD, but I do not find instructions for disassembly.
    Can you help me?I also add a software problem, each time you start the module IGFX stops giving an error, how can I do to solve?

    Here is a video that will help: Remove top cover Replacing the hard drive with an SSD will require that the top cover be removed and the hard drive sits in a bay next top the motherboard.It is not so easy as other models which have an easy access door for the hard drive. While you are in there consider upgrading the memory as that is even moire of a chore. Replace the SATA hard drive with the SSD. You should make the HP Recovery Disks using the HP restore and backup utility installed on the computer. Since it is so new a factory reload will likely not lose much if any of your data but you also have the option to back that up, too' If this is "the Answer" please click "Accept as Solution" to help others find it.

  • How to replace hard drive 2009 iMac

    My 2009 iMac's hard drive is dying.
    What is the easiest way to have it replaced?
    Should I take it to an Apple store to have it replaced?
    I don't have an extended warranty.
    Thanks

    Yes, you can take it to an Apple Store. You could also try doing it yourself. Just visit OWC for a selection of drives, tools, and tutorials.

  • How to replace hard drive on 700Mhz iBook?

    I have an iBook 700Mhz G3 (16 VRAM, I think), and am ready to replace its hard drive with a larger Seagate. I was hoping this would be easy, but I have a funny feeling it is not. Does anyone have a step by step set of instructions to replace the drive on this particular model?

    I successfully followed the ifixit guide and I have some advice based on what I did right and wrong.
    1) Make sure you have good tools from the outset. Get the best #0 Philips Head and Torx T8 screwdrivers you can find. (I bought the set from Other World Computing and they worked great. Removing Philips Head screws with my older, cheaper screwdriver was MUCH more difficult. With all of the PH screws you are going to have to take out, you'll be much happier using a good tool.)
    2) Get a "spudger." Using a flat head screwdriver for prying apart the plastic parts chewed up the edges pretty good. I thought I was going to be able to find such a tool at Lowes or Home Depot, but I was wrong.
    The good news is that if you succeed, you will have "Mad Skillz." And that will really help you out with the ladies, just like Napoleon Dynamite said!
    Power Mac G5 2x2, iBook, eMac   Mac OS X (10.4.7)   PM: 1.5 GB, iB: 500MHz, 640MB RAM, 80GB HD

  • How to replace hard drive on micro ph

    does anyone know how to replace the hard dri've on the zen micro photo ? can u pls tell me all the instructions or a link to the instructions thanks a bunch

    I successfully followed the ifixit guide and I have some advice based on what I did right and wrong.
    1) Make sure you have good tools from the outset. Get the best #0 Philips Head and Torx T8 screwdrivers you can find. (I bought the set from Other World Computing and they worked great. Removing Philips Head screws with my older, cheaper screwdriver was MUCH more difficult. With all of the PH screws you are going to have to take out, you'll be much happier using a good tool.)
    2) Get a "spudger." Using a flat head screwdriver for prying apart the plastic parts chewed up the edges pretty good. I thought I was going to be able to find such a tool at Lowes or Home Depot, but I was wrong.
    The good news is that if you succeed, you will have "Mad Skillz." And that will really help you out with the ladies, just like Napoleon Dynamite said!
    Power Mac G5 2x2, iBook, eMac   Mac OS X (10.4.7)   PM: 1.5 GB, iB: 500MHz, 640MB RAM, 80GB HD

  • HOW TO REPLACE HARD DRIVE WHITE MACBOOK EARLY 2009

    I have a White MacBook Early 2009, I need suggestions. My Macbook is still running fine, but would like to know which Hard Drive I should purchase as replacement. Thinking of going 500GB if possible, I already downloaded the instructions. Just trying to get my ducks in order for when that time comes, hopefully not for a few more years.

    For a new hard drive try Newegg.com  
    Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE  Use the list at the left for larger and faster drives.
    SSD drives
    http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE  Use the list at the left for larger and faster drives.
    Or OWC for regular hard drives and SSDs  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html 
      You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
    Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
      If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • HP 15-n276sa how to replace hard drive

    Hi guys I bought this laptop recently but need to swap the hard drive out but cant find the slot for the battery can any one help??? model is 15-n276sa a new windows 8 machine bought this month

    by the way I can only see one slot on the macine to upgrade ram

  • How to replace hard drive, how to replace hard drive, how to replace hard drive, how to replace hard drive, how to replace hard drive, how to replace hard drive, how to replace hard drive

    My Disk Utility says my disk cannot be repaired and that I should replace it. What is the cheapest way to do this?
    Thanks.

    It is fairly easy to DIY the 2010 Mac Mini's HD, see >  Mac Mini Mid 2010 Repair - iFixit
    If you are not able to DIY, use the Service link at > Apple - Find Locations and contact your local Apple Authorized Service Provider.

Maybe you are looking for

  • Exception ( in Reporting Agent ) background job runs indefinitely

    Hi I created an Exception setting under reporting agent (to send out a mail in the SAP Office inbox, on a specific exception) and assigned it under a scheduling package. I have assigned a proper query variant to the exception setting also. When I exe

  • Backlight mark on mbp 13

    I've had my MacBook Pro 13 for four months now, and just recently this odd circular mark has appeared on the screen. It isn't noticeable when the screen is displaying light colors, but when it's grey or black you can see it visibly. Is this something

  • HTML page with MUSE

    Hi everyone, I created a HTLM page with Adobe Muse to make parallax effect scrolling. I have imported that page, like folio, in to my DPS project. All page is working but the swipe to change the page are disabled. Why? There are some functions to res

  • Safari screen 'disfigured' while scrolling

    A strange disfiguration happens when I surf with Safari, on my Intel iMac. When I visit CNN.com for example, and I scroll down, I get thin horizontal 'slices' of a sentence directly above the sentence itself. It is as if the screen is not build up qu

  • Problems with brush size in CS6

    Somebody help please, what ever size canvas i choose, my brushes come out extremly small ! how can i resolve this please ? Photoshop CS6