How to replace line break for comma

Hi there,
i have a string which is like
header1,value1,header2,value2,header3,value3,header4,value4now i have to write the above string to a file which should be like
file.txt should be
header1,value1
header2,value2
header3,value3
header4,value4i can write the string to a file easy, but i need to make the every even number , to line break.
any help
Thanks
R

You may get a better way, but this is how I would do this:
-- split the string on comma
-- iterate through the array using a for i+=2 loop and concatenate every pair of strings with comma-space between.
db
edit And write the results to a new array of half the length, of course. Then write the new array to the file.
Edited by: Darryl.Burke

Similar Messages

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

How to avoid line break ( br ) while exporting Interactive report in Excel

Hi,
I have a Interative report and I am using Apex download format as CSV.
I have defined some of the column heading in multiple line using break 
when I export this into the excel sheet..the column heading contains break also..
- Any idea how to avoid line break while exporting in excel.
- also how to put the columns heading in BOLD when exported in excel.
Thanks,
Deepak

Hi Jari,
I tried this but still getting the
 Interactive Report
Column Attributes Heading - Employee Detail AddressWhen I download the Report in CSV Format
I am getting the heading with .
I am looking for heading as - Employee Detail Address // with no tagThanks,
Deepak

FXML - Line break for text-attribute (LABEL)

Hi!
How to define a text with a line break for a label in FXML?
For example, I cant get this to work (\n):
<Label text="Break\nLine"/> Thanks,
Jörn

Hi,
If you use SceneBuilder Developer Preview 1.1 you will see that SceneBuilder generates this:
<Label layoutX="266.0" layoutY="172.0" text="Break
Line" />To enter a new line in a text label in SceneBuilder is easy (even though a bit hidden).
If you hover the mouse over the label text property in the Inspector (right hand side), you will see a little cog menu fading in. If you click on it - you will be able to 'Switch to multi-lines mode' - you can then enter a text with new lines - then save the file and see how it's been handled...
hope this helps,
-- daniel

VSTO: How to set line break in Ribbon Xml?

Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?

Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

Line break for code postings

Hi there,
normally the forum software does insert automatically a line break for text posting. If i write a
code posting with the {code} parameter, it does not do like that. Sometimes the posts runs
out of the displayed field.
It is a bug or wanted ?
Regards Steffen

Thanks.
But now, I have a syntax error.
BEGIN OF xml_line,
          data(256) TYPE x
END OF xml_line.
DATA: lt_xml_table      TYPE TABLE OF xml_line,
      ls_xml_table      TYPE xml_line.
LOOP AT lt_xml_table INTO ls_xml_table.
    CONCATENATE ls_string cl_abap_char_utilities=>cr_lf INTO ls_string.
    MODIFY lt_xml_table FROM ls_xml_table INDEX sy-tabix.
    CLEAR : ls_xml_table, ls_string.
ENDLOOP.

How to extract compiled stored procedure without line break for long statement

After I compiled stored procedure which contains long statement, the statement would cut into 2 rows into dba_source.
However, when I extract the codes from dba_source table, the source couldn't be compiled successfully because of
the broken lines.
For example, the following statement would be broken into 2 rows like this:
(line 1) gv_Message := 'Interface Description: Interface with Training '|| 'and Development Intran
(line 2) et (Evaluation Statistic Details)';

That's very strange. What did you originally compile it with (sql*plus, toad, etc...)? I was able to compile a procedure with the maximum line length (2499 characters see error SP2-0027) and there is no split. Is the procedure in a VALID state with that line break? Honestly, this seems very odd, possibly even a bug here somewhere.
Richard

How to handle line break embeded inside CSV column

Hi there,
I am under the pressure to make it work. I already put this question on APEX forum, but on second thought, I think it relates more to PL/SQL rather than APEX since APEX 4.1 already have utility to handle CSV Upload.
If you read it already in APEX forum, please ignore.
I am sorry for that. Thanks for reading.
I need to develop an app that allows user to upload CSV file to a interface table.
The APEX version at my workplace is 4.0.2.
I used the code from
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:11000346061523
It all works well till recently I find out
If a column in a CSV file cotain a line break (or new line) e.g. (The tester copy and paste this text which has line break into a column in a spreadsheet)
This is the first sentence.
This is the second sentence.
It will break the “This is the second sentence”. To a new column.
The contents of the CSV viewed in Notepad look as below
Assessment Date,Scheduled Date,Assessment Provider,Assessor Name,Court,First Name,Middle Name,Last Name,PRN Person Record Number,NHI Number,Defendant Attended Y/N,Is Dependent Y/N,Notes,Primary Ethnicity,"Ethnicity Other, please specify",Gender,Currently in Treatment Y/N,Substance of Concern 5,Other Substance Specified
22/09/2012,,Provider Co Name,Warren Edgley,Wellington,,,Salty,2545554,dgsdf,ergerg,,"This is the first sentence.
This is the second sentence.",Japanese,,Female,b,,
Here is the code from the CSV UTIL, please help me to find out how can I replace the line break to a space so that the uploading process is correct.
CREATE OR REPLACE PACKAGE BODY "CSV_UTIL"
AS
 --strip the beginning and the end quotes, then replace double quotation with single
 FUNCTION de_quote (p_str IN VARCHAR2, p_enc_by IN VARCHAR2)
 RETURN VARCHAR2
 IS
 v_str VARCHAR2(32767) := p_str;
 BEGIN
 IF (p_enc_by IS NULL)
 THEN
 RETURN p_str;
 ELSE
 IF SUBSTR(p_str,-1) = p_enc_by THEN
 v_str := SUBSTR(p_str,1,LENGTH(p_str)-1);
 END IF;
 IF SUBSTR(p_str,1,1) = p_enc_by THEN
 v_str := SUBSTR(v_str,2);
 END IF;
 RETURN REPLACE (v_str,
 p_enc_by || p_enc_by,
 p_enc_by
 END IF;
 END de_quote;
 PROCEDURE parse (p_str IN VARCHAR2, p_enc_by IN VARCHAR2, p_sep IN VARCHAR2)
 IS
 l_n NUMBER DEFAULT 1;
 l_in_quote BOOLEAN DEFAULT FALSE;
 l_ch NCHAR (1);
 l_len NUMBER DEFAULT NVL (LENGTH (p_str), 0);
 BEGIN
 IF (l_len = 0)
 THEN
 RETURN;
 END IF;
 g_words := g_empty;
 g_words (1) := NULL;
 FOR i IN 1 .. l_len
 LOOP
 l_ch := SUBSTR (p_str, i, 1);
 IF (l_ch = p_enc_by)
 THEN
 l_in_quote := NOT l_in_quote;
 END IF;
 IF (l_ch = p_sep AND NOT l_in_quote)
 THEN
 l_n := l_n + 1;
 g_words (l_n) := NULL;
 ELSE
 g_words (l_n) := g_words (l_n) || l_ch;
 END IF;
 END LOOP;
 g_words (l_n) := de_quote (g_words (l_n), CHR(10));
 g_words (l_n) := de_quote (g_words (l_n), CHR(13));
 FOR i IN 1 .. l_n
 LOOP
 g_words (i) := de_quote (g_words (i), p_enc_by);
 END LOOP;
 END parse;
Author: Oleg Lihvoinen
Company: DbSWH
Changes:
10.02.2011, There was a miscalculation of the file line last position in case it is the end of file
 PROCEDURE upload (p_file_name VARCHAR2, p_collection_name VARCHAR2, p_enc_by IN VARCHAR2, p_sep_by IN VARCHAR2, p_rows NUMBER)
 IS
 v_blob_data BLOB;
 v_clob_data CLOB;
 v_clob_len NUMBER;
 v_position NUMBER;
 v_char NCHAR (1);
 c_chunk_len NUMBER := 1;
 v_line VARCHAR2 (32767) := NULL;
 v_data_array vcarray;
 v_rows NUMBER := 0;
 n_seq NUMBER := 1;
 dest_offset NUMBER := 1;
 src_offset NUMBER := 1;
 amount INTEGER := DBMS_LOB.lobmaxsize;
 blob_csid NUMBER := DBMS_LOB.default_csid;
 lang_ctx INTEGER := DBMS_LOB.default_lang_ctx;
 warning INTEGER;
 l_sep VARCHAR2(100) := CASE WHEN p_sep_by = '\t' THEN chr(9) ELSE p_sep_by END;
 BEGIN
 htmldb_collection.create_or_truncate_collection
 (p_collection_name => p_collection_name);
 -- Read blob from wwv_flow_files
 SELECT blob_content
 INTO v_blob_data
 FROM wwv_flow_files
 WHERE NAME = p_file_name;
 v_position := 1;
 DBMS_LOB.createtemporary (lob_loc => v_clob_data,
 CACHE => TRUE,
 dur => DBMS_LOB.SESSION
 DBMS_LOB.converttoclob (v_clob_data,
 v_blob_data,
 amount,
 dest_offset,
 src_offset,
 blob_csid,
 lang_ctx,
 warning
 v_clob_len := DBMS_LOB.getlength (v_clob_data);
 IF v_clob_len = 0 THEN
 RETURN;
 END IF;
 WHILE (v_position <= v_clob_len + 1)
 LOOP
 v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
 v_line := v_line || v_char;
 v_position := v_position + c_chunk_len;
 -- When the whole line is retrieved and not end of file or end of file
 IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
 THEN
 parse (p_str => v_line, p_enc_by => p_enc_by, p_sep => l_sep);
 v_data_array := g_words;
 FOR i IN 1..g_words.count LOOP
 IF i <= 50 THEN
 v_data_array(i) := g_words(i);
 ELSE
 exit;
 END IF;
 END LOOP;
 FOR i IN g_words.count + 1..50 LOOP
 v_data_array(i) := null;
 END LOOP;
 v_rows := v_rows + 1;
 -- exit if uploaded specified number of rows
 IF p_rows IS NOT NULL AND v_rows > p_rows THEN
 EXIT;
 END IF;
 -- Store data to collection
 n_seq :=
 htmldb_collection.add_member
 (p_collection_name => p_collection_name,
 p_c001 => v_data_array
 (1),
 p_c002 => v_data_array
 (2),
 p_c003 => v_data_array
 (3),
 p_c004 => v_data_array
 (4),
 p_c005 => v_data_array
 (5),
 p_c006 => v_data_array
 (6),
 p_c007 => v_data_array
 (7),
 p_c008 => v_data_array
 (8),
 p_c009 => v_data_array
 (9),
 p_c010 => v_data_array
 (10),
 p_c011 => v_data_array
 (11),
 p_c012 => v_data_array
 (12),
 p_c013 => v_data_array
 (13),
 p_c014 => v_data_array
 (14),
 p_c015 => v_data_array
 (15),
 p_c016 => v_data_array
 (16),
 p_c017 => v_data_array
 (17),
 p_c018 => v_data_array
 (18),
 p_c019 => v_data_array
 (19),
 p_c020 => v_data_array
 (20),
 p_c021 => v_data_array
 (21),
 p_c022 => v_data_array
 (22),
 p_c023 => v_data_array
 (23),
 p_c024 => v_data_array
 (24),
 p_c025 => v_data_array
 (25),
 p_c026 => v_data_array
 (26),
 p_c027 => v_data_array
 (27),
 p_c028 => v_data_array
 (28),
 p_c029 => v_data_array
 (29),
 p_c030 => v_data_array
 (30),
 p_c031 => v_data_array
 (31),
 p_c032 => v_data_array
 (32),
 p_c033 => v_data_array
 (33),
 p_c034 => v_data_array
 (34),
 p_c035 => v_data_array
 (35),
 p_c036 => v_data_array
 (36),
 p_c037 => v_data_array
 (37),
 p_c038 => v_data_array
 (38),
 p_c039 => v_data_array
 (39),
 p_c040 => v_data_array
 (40),
 p_c041 => v_data_array
 (41),
 p_c042 => v_data_array
 (42),
 p_c043 => v_data_array
 (43),
 p_c044 => v_data_array
 (44),
 p_c045 => v_data_array
 (45),
 p_c046 => v_data_array
 (46),
 p_c047 => v_data_array
 (47),
 p_c048 => v_data_array
 (48),
 p_c049 => v_data_array
 (49),
 p_c050 => v_data_array
 (50)
 -- Clear the line
 v_line := NULL;
 END IF;
 END LOOP;
 END;
END;In my apps, I save these straight into a table rather than an APEX collection because the number of columns can be longer than 50.
I want to find out how can replace these line break inside a column to a space.
If any one has any ideas, please let me know.
Thanks a lot in advance.
Ann

Ann586341 wrote:
I think the code split the whole thing by this line
-- When the whole line is retrieved and not end of file or end of file
IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
THEN
Yes, exactly. That piece of code believes all CHR(10) occurences are record delimiters.
It is not smart enough to recognize that a CHR(10) within quotation marks are part of the data.
Optimally a solution should keep the CHR(10) rather than replacing with spaces, but that will be a bigger rewrite of the UTL_CSV code ;-)
If you are happy with replacing with spaces, a "simple" solution could be something like:
Declare a boolean variable in upload procedure:
v_within_text_column boolean := false;And use it like this:
 WHILE (v_position <= v_clob_len + 1)
 LOOP
 v_char := DBMS_LOB.SUBSTR (v_clob_data, c_chunk_len, v_position);
 IF v_char = '"' THEN
 v_within_text_column := NOT v_within_text_column;
 ELSIF v_char = CHR(10) AND v_within_text_column THEN
 v_char := ' ';
 END IF;
 v_line := v_line || v_char;
 v_position := v_position + c_chunk_len;
 -- When the whole line is retrieved and not end of file or end of file
 IF v_char = CHR (10) AND v_position < v_clob_len OR v_position = v_clob_len + 1
 THEN
 v_within_text_column := false; -- To be safe always set this on "true" linebreaks
{code}
+(This is untested code just written here in the text editor.)+
It should work by toggling a flag whether you are "within" the quotes or not and then replacing CHR(10) with a space if you are within a text column.
This way we avoid having to go through the clob more than once (it is enough that this code walks the clob one character at a time...)
It will not handle if the clob contains situations like:
{code}
abc,123,"This is a text with a quote from a man who said \"To Be,
or Not To Be\" some hundred years ago",123,xyz
{code}
Escaped quotes would need separate attention ;-)

Line Break for XML File

All,
I am able to generate xml file from an internal table. The problem is, if I open the file in IE everything looks good. When I open it in notepad or notepad++, everything is in one line. Can you tell me how to generate a line break after each tags.
Please find the following code used by me for reference.
LOOP AT lt_ohd INTO ls_ohd.
    ls_temp_ohd = ls_ohd.
    AT FIRST.
      l_ixml = cl_ixml=>create( ).
      l_document = l_ixml->create_document( ).
      l_element_ohd = l_document->create_simple_element(
                  name = 'OHD'
                  parent = l_document ).
    ENDAT.
    AT NEW cc.
      CLEAR : lv_inhaltskom, lv_text.
      lv_inhaltskom = ls_temp_ohd-cc.
      CALL FUNCTION 'ISM_SELECT_TEXT_JJTIKO'
        EXPORTING
          pv_inhaltskom = lv_inhaltskom
        CHANGING
          pv_langtext   = lv_text.
      TRANSLATE lv_text TO UPPER CASE.
      l_value = lv_text.
      l_element_county = l_document->create_simple_element(
                  name   = 'city_county'
                  value = l_value
                  parent = l_element_ohd ).
    ENDAT.
    AT NEW order.
      l_element_neighborhood = l_document->create_simple_element(
                  name    = 'entry'
                  parent = l_element_county ).
    ENDAT.
    l_value = ls_temp_ohd-neighborhood.
    l_element_address = l_document->create_simple_element(
                name   = 'neighborhood'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-address_detail.
    l_element_address = l_document->create_simple_element(
                name   = 'address_detail'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-order.
    l_element_address = l_document->create_simple_element(
                name   = 'order'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-item.
    l_element_address = l_document->create_simple_element(
                name   = 'item'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-cc.
    l_element_address = l_document->create_simple_element(
                name   = 'cc'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-address.
    l_element_address = l_document->create_simple_element(
                name   = 'address'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-price.
    l_element_address = l_document->create_simple_element(
                name   = 'price'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-bed.
    l_element_address = l_document->create_simple_element(
                name   = 'bed'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-bath.
    l_element_address = l_document->create_simple_element(
                name   = 'bath'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-opentime.
    l_element_address = l_document->create_simple_element(
                name   = 'opentime'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-state.
    l_element_address = l_document->create_simple_element(
                name   = 'state'
                value = l_value
                parent = l_element_neighborhood ).
    l_value = ls_temp_ohd-zip.
    l_element_address = l_document->create_simple_element(
                name   = 'zip'
                value = l_value
                parent = l_element_neighborhood ).
    l_streamfactory = l_ixml->create_stream_factory( ).
    l_ostream = l_streamfactory->create_ostream_itable( table = lt_xml_table ).
    l_renderer = l_ixml->create_renderer( ostream = l_ostream
                                          document = l_document ).
    l_rc = l_renderer->render( ).
    l_xml_size = l_ostream->get_num_written_raw( ).
ENDLOOP.
Regards,
Salil
Edited by: salil vaidya on Jan 18, 2011 2:34 PM

Thanks.
But now, I have a syntax error.
BEGIN OF xml_line,
          data(256) TYPE x
END OF xml_line.
DATA: lt_xml_table      TYPE TABLE OF xml_line,
      ls_xml_table      TYPE xml_line.
LOOP AT lt_xml_table INTO ls_xml_table.
    CONCATENATE ls_string cl_abap_char_utilities=>cr_lf INTO ls_string.
    MODIFY lt_xml_table FROM ls_xml_table INDEX sy-tabix.
    CLEAR : ls_xml_table, ls_string.
ENDLOOP.

How to put line break in the text

Hi guys,
This is a simple problem.i don't know how to concat a line break while creating a text.
I am looping through the results of a query and want to form the text using the results.
For each row of the resultset,I want to create a new line in the text i create.
I was wondering how to put a new line in the text.
I thought I can concat '\n' ,but it does not work.
the code snippet in the procedure is :
for c1_rec in c1 loop
vMsg := ' There are ' || c1_rec.total ||
     ' documents of type ' || c1_rec.doc_type || '\n' ;
end loop;
Please give the solution.
Thanks in advance.

Thank you Mark.
I tried your suggestion.But line break is not working in email.
Here is how my code is
in procedure 1 ,i create the message String as :
for c1_rec in c1 loop
vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
     ' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
dbms_output.put_line(' ' || vMsg);
end loop;
--here sending mail calling another procedure
sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
In Procedure 2( i.e sendmail procedure )
i am preparing email server connection from and to adresses .Then i am preparing and sending message as
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
conn:= utl_smtp.open_connection( EmailServer, Port );
     utl_smtp.helo( conn, EmailServer );
     utl_smtp.mail( conn, SENDER);
     utl_smtp.rcpt( conn, RECEIVER )
mesg:= 'Subject: ' || SUBJECT || crlf ||
               'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
               crlf ||
               'From:'||SENDER|| crlf ||
               'To: '||RECEIVER || crlf ||
               'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
               '' || crlf || MESSAGE ;
     utl_smtp.data( conn, mesg );
     utl_smtp.quit( conn );
even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
Thank you.

How to set line break points in JSF Facelets files on NetBeans?

I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml filles?
Thank you very much.

You can't. They aren't executable code, they are templates. The only executable code is the part inside #{}.

Line Break for the column

Hi,
I have a BIP Report.
The report includes the layout of a free text column. This text goes towards the right side for sufficient length.
I want to wrap the text or line break this text.
In the rtf template, I am using the following formula:
<?html2fo: OUTPUT_NOTES?>
Any Ideas?

Dear,
Add the UDF's on the marketing document you want the tax break up.
Apply FMS using below queries and call these UDF's on your PLD.
FOR BED
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount =$[$38.21.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
 STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
 STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='9' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For Cess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
 STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
 STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='8' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For HCess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT @Rate=STA1.Rate
FROM OSTC INNER JOIN
 STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
 STA1 ON STC1.STACode = STA1.StaCode Where OSTC.Code=$[$38.160.0] And STA1.SttType='10' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
This will help you.
regards,
Neetu

How to include Line break in string?

Hello Experts,
I have a requirement like, I have to display the string value in 2 lines in Web UI.
I have achieved that functionality using the below code in CRM Ehp1.
data : str1 type string,
str2 type string,
lv_str type string.
str1 = 'Hello'.
str2 = 'World'.
lv_str = |{ str1 }\n{ str2 }|.
write /: lv_str.
The output is: Hello#World
In web ui, it is displaying in two lines like
Hello
World
But, the special character '|' is not supported in CRM 7.0
Is there anyway for line-break?
Regards
DNR Varma

Hello
I always use cl_abap_char_utilities=>cr_lf as a line-break symbol .
Regards
Joaquin

[solved] How to have line breaks in output of journalctl log

Hello,
How can I have line breaks in the journalctl log output?
At the moment I cannot read most of the log output because it does not fit into my terminal.
See this screenshot: http://i.imgur.com/nUR6Fae.png
Thanks!
Last edited by orschiro (2013-09-20 08:08:04)

You can run
journalctl -b --no-pager | less
Edit: If you hit 'h' you get help screen
SUMMARY OF LESS COMMANDS
<snip>
ESC-) RightArrow * Left one half screen width (or N positions).
ESC-( LeftArrow * Right one half screen width (or N positions).
<snip>
It may be possible to configure the way the journal uses the pager so it wraps the lines by default.
Edit 2: Or maybe it can't be configured.
man journalctl wrote:The output is paged through less by default, and long lines are "truncated" to screen width. The hidden part can be viewed by using the left-arrow and right-arrow keys. Paging can be disabled, see --no-pager and section Environment below.
Last edited by karol (2013-09-20 08:02:13)

How to replace power adapter for PowerBook G4

I have a three year old powerbook G4 and the power adapter is toast (at least I think that's the problem). Doesn't charge and no illuminated ring around the connector to the computer.
Does anyone know how to replace this? Can't find it anywhere online or at Mac retailers.
Thanks.

Replace the power adapter plug? Most folks won't bother, it's a hassle. The whole adapter is easily available from any Mac vendor. But before replacing anything, have you tried the following:
-reset the Power Management Unit (PMU)
http://support.apple.com/kb/HT1431?viewlocale=en_US
-reset the PRAM
http://support.apple.com/kb/HT1431?viewlocale=en_US
-unplug the power adapter from the wall socket for a while to reset.

How to replace line break for comma

Similar Messages

Maybe you are looking for