How to replace memory on m6-n010dx

can i change the memory on an hp envy m6-n010dx

maddmatt1531 wrote:
can i change the memory on an hp envy m6-n010dx
Hi,
What do you mean "change" ? Your machine currently has 6GB of RAM:
http://support.hp.com/us-en/product/HP-ENVY-m6-Notebook-PC-series/6740559/model/6953264/document/c04...
Your machine supports up to 16GB of RAM (8GB x 2) Please use the following manual (page #33) which shows you how to add/replace RAM:
http://h10032.www1.hp.com/ctg/Manual/c04499120
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to replace a field's search help of DDIC in FPM feeder class?

Hi All,
I want to replace a field's search help in DDIC structure, for an example, in structure HCMT_BSP_PA_XX_R0009, the field BANKL(Bank Keys) has a search help named 'H_BANKL', I want to replace this search help with other one such as 'H_BANKEY' in the FPM feeder class CL_HRESS_PER_DETAIL, I redefined such method:
method if_fpm_guibb_form~get_definition.
field-symbols: <fs_field_description> like line of et_field_description.
call method super->if_fpm_guibb_form~get_definition
importing
es_message = es_message
eo_field_catalog = eo_field_catalog
et_field_description = et_field_description
et_action_definition = et_action_definition
et_special_groups = et_special_groups
ev_additional_error_info = ev_additional_error_info.
read table et_field_description assigning <fs_field_description> with key name = 'BANKL'.
set search help name of field 'bank key'
if <fs_field_description> is assigned.
<fs_field_description>-ddic_shlp_name = 'H_BANKEY'
endif.
endmethod.
I test it and found the search help window was replaced indeed, but all the value of import/export parameters in the new search help was lost, it means, the value of import paramer BANKS(Bank country) and the export parameter BANKA(bank name) were lost. Only the value of BANKL itself can be returned by the new search help window. Can you give me some suggestions about how to maintain the link( value exchange) between structure HCMT_BSP_PA_XX_R0009 and dynamically defined search help 'H_BANKEY' in FPM feeder class?
I tried to use sap memory ID but it doesn't works well.

This question was answered at [Webdynpro Forum|how to replace a field's search help of DDIC in FPM feeder class?;:
That is because for the import and export of DDIC Search help values to work in WDA, not in FPM layer.Feeder Class can do nothing about it.

I haven't done an update since 24.0 because my computer is running out of memory. How much MORE memory will I need to get up to version 28.0?

I haven't done an update since 24.0 because my computer is running out of memory. How much MORE memory will I need to get up to version 28.0?
My computer is really old.
It is running out of memory.
I haven't done a firefox update since 24.0 because I think it will explode my computer.
I see that v28.0 takes 200MB.
How much more is this than what is already loaded for my v24.0?
Will it just add the extra pieces, or will it require a free block of 200MB (which my computer does not have)?
I don't want to crash and lockup my computer because I try to install something that is too big for the remaining memory.
Thanks.

You should updated to Firefox 28, Firefox updates don't take any new space they just replace the existing files.
There are some things you can do to clean up your hard drive to free up space however, http://arstechnica.com/civis/viewtopic.php?p=21178060 and http://support.microsoft.com/kb/956324, also uninstall programs you don't use anymore and delete files you don't need anymore.
You should also start saving up for a new machine, Windows XP is being dropped from support by Microsoft in a few days, which means it will no longer be safe to use on the internet.

How to remove memory modules from Toshiba notebooks?

You can remove the memory module from your laptop,this is the hardware related technique.

Here you can find a nice Forum place containing some workarounds how to remove and replace the modules.
[How to remove memory modules from Toshiba notebooks?|http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=114]

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to replace NULL values from main table

Dear all,
I like to remove the NULL values from a main table field. Or the question is how to replace any part of the string field in MDM repository main table field.
e.g. I have a middle name field partly the value is NULL in some hundreds of records, I like to replace NULL values with Space
any recommendation.
Regards,
Naeem

Hi Naeem,
You can try using Workflows for automatically replacing NULLs with any specific value.
What you can do is: Create a workflow and set trigger action as Record Import, Record Create and Record Update. So, that whenever any change will occur in the repository; that workflow will trigger.
Now create an assignment expression for replacing NULLs with any specific value and use that assignment expression in your workflow by using Assign Step in workflow.
For exiting records, you will have to replace NULLs manually using the process given by Preethi else you can export those records in an Excel spreadsheet which have NULLs and then replace all NULLs with any string value and then reimport those records in your MDM repository.
Hope this will solve your problem.
Regards,
Varun
Edited by: Varun Agarwal on Dec 2, 2008 3:12 PM

How to replace obsolete download function module in ECC6.0?

Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.

Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
          EXPORTING
               FILENAME            = p_filename
               FILETYPE            = DAT
          TABLES
               DATA_TAB            = T_DOWNL
          EXCEPTIONS
               INVALID_FILESIZE    = 1
               INVALID_TABLE_WIDTH = 2
               INVALID_TYPE        = 3
               NO_BATCH            = 4
               UNKNOWN_ERROR       = 5
               OTHERS              = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename    TYPE string,
       l_filen       TYPE string,
       l_path        TYPE string,
       l_fullpath    TYPE string,
       l_usr_act     TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
    DEFAULT_FILE_NAME    = l_filename
CHANGING
    FILENAME             = l_filen
    PATH                 = l_path
    FULLPATH             = l_fullpath
    USER_ACTION          = l_usr_act
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    NOT_SUPPORTED_BY_GUI = 3
    others               = 4.
IF sy-subrc = 0
      AND l_usr_act <>
      CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = l_fullpath
   FILETYPE                        = 'DAT'
TABLES
    DATA_TAB                        = T_DOWNL
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22.

How to replace double quotes with a single quote in a string ?

Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.

Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals.

How to reduce memory use on my iMac

How to reduce memory use on my iMac, OS X Yosemite, 2.7 GHz Intel Core i5
8 GB memory
Running very slowly, and the little spinning ball showing up.
How do I clean up my IMac please?
Should I use MacKeep or any clean up apps?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to replace multiple occurences of space in a string to a single space?

How to replace multiple occurences of space in a string to a single space?

Hi,
try this code.
data : string1(50) type c,
          flag(1) type c,
          dummy(50) type c,
          i type i,
          len type i.
string1 = 'HI READ    THIS'.
len = strlen( string1 ).
do len times.
if string1+i(1) = ' '.
flag = 'X'.
else.
if flag = 'X'.
concatenate dummy string1+i(1) into dummy separated by space.
clear flag.
else.
concatenate dummy string1+i(1) into dummy.
endif.
endif.
i = i + 1.
enddo.
write : / string1.
write : / dummy.

How to replace/remove/change font color of a character at in output

Hi all,
I am using rtf template to get the output of a report, however i have a condition for field "Narratives" where if field A contains 'X', I need to either get rid of the 'X', replace with '' or change the font of X to white.
Meaning if the output is : My Name is BavaniX
I need it to look like : My Name is Bavani
I use the BI Publisher desktop tool to create the placeholders. Highly appreciate if someone could advise me on how to replace with '' or change X to white font or remove the X using the BI desktop tool.
The placeholder right now looks like this <?(NARRATIVES)?>.
Thank you.

if you want to replace also look at
How to remove underscore in xml tag
Re: How to remove underscore in xml tag
Edited by: AlexAnd on Aug 2, 2012 5:55 AM

My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back. Thanks so much . . .

My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back. Thanks so much . . .

Do you mean the App Store app on your iPad ? If you do then it can't be deleted, but you might have hidden it via Settings > General > Restrictions > Installing Apps 'off' - if that is 'off' then turn it back 'on' and the app should show on one of your iPad's home screens again

LIVE Video Tutorial! How to Replace and Configure a Video Card - HP Expert Day "How-To" Video Series – Today at 1:00pm PST

Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
I am an HP employee.

#test

LIVE Video Tutorial! How to Replace a Hard Disk Drive - HP Expert Day "How-To" Video Series - Today at 11:00am PST

Join us at 11:00am Pacific time for a LIVE video tutorial of how to replace a hard drive! The video features HP experts who work with the products every day!
I am an HP employee.

#test

How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working 10g

Hi,
How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working in obiee10g version.
We have tried below methods
1) criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
#,##0;-#,##0;0
2) in that formula columns we have put it below case condition also ,
Measure Column: Nom_amt --> edit formulas
CASE WHEN Nom_amt IS NULL THEN 0 ELSE Nom_amt END
3) we have uncheked IS NULL check box in the admin tool also
I tried above formats still it's not working for me..kindly help me on this..
thanks to do the needfull
Best Regards,
R.Devarasu

Hi,
Null value in database displaying as 0 in report, I need to keep value as in database, and I have one calculated row which is based on null values should also null in report.
but it showing 0 for null values also so, my calculated row showing wrong result.
my report is like
col1 col2
ABC 0
BCD 12
DEF -12 --this is calculated row.
I require result like:
col1 col2
ABC null
BCD 12
DEF null --this is calculated row.
Please let me know how I can achieve this.
Thanks,
Rahul

How to replace memory on m6-n010dx

Similar Messages

Maybe you are looking for