How to replace motherboard on a 2009 17" macbook pro?

Hi I need some help?
Travelling India and my 17" macbook pro has given up on me. Its a 2009 model. Can I replace the motherboard? Any advice? Thanks.

Try this:
Reset SMC
http://support.apple.com/en-us/HT201295

Similar Messages

Please help: How to replace all data on mid-2010 MacBook Pro 15 with Timemachine backup from 2009 MBP 13

OK so I bought a mid-2010 MacBook pro 15 from a friend and he did not erase anything before he gave it to me. I was previously working on a 2009 MacBook pro 13 and have a Timemachine backup from that which I would like to install on the MBP 15 replacing all of the current data.
I have tried rebooting using the OSX disc that came with the MBP 15 but that won't work - I am assuming that is because the OSX disc is version 10.6.3 while the current OS on the MBP 15 is 10.7.4
What is the best/easiest way to use the Timemachine backup of my MBP 13" to replace all info on the MBP 15"?
This seems like something that should be easy but I have been trying to do it since last night and haven't found relevant info in the discussion forums. Any help would be greatly appreciated!!
Thanks!

MacBook Pro 15" 2010
Intel Core i7 2.8GHz M 640 Arrandale Cores 2 (2867)
8GB max RAM 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
NVIDIA GeForce GT 330M 512MB (15.85) (369) and Intel HD Graphics 3000 (10) (309)
MacBook Pro 13" Mid 2012
Intel Core i7 3520M Ivy Bridge Cores 2 (4519)*
16GB RAM max actual (8GB Apple) 2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Intel HD Graphics 4000 (unknown) (465)*
The 13" is a more powerful machine and it has more RAM capacity.

SATA cable replaced but not booting 2009 Unibody MacBook Pro but HD boots from USB

Intially I got the greay flashing folder.
Pulled the drive from the computer and booted it on the same computer with through SATA to USB external reader, no problems.
Ordered a new SATA cable and installed, I have checked all connections for firm snug fitting and proper instalation.
The HD will not boot from inside the computer.
I am in a country that does not have Apple stores and the closest reseller is a great distance away.
Any ideas?
What could cause this issue?
Thanks!

Try this:
Connect the drive to the MBP as before. Go to Applications / Utilities / Disk Utility. In DU, select the external drive in the left hand column, click First Aid, then Repair Disk. When that is done, do it again. Next click Repair Permissions. After that, quit DU
That process may be all you need to do to get the files you need off the external.

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How much should it cost to replace a hard drive on a MacBook Pro.

How much should it cost to replace a hard drive on a MacBook Pro? I think the drive that failed was 500gb.

This is an international community. Prices vary from country, state, city, etc.
You should call the repair shop of your choice and ask for an estimate. Make sure the estimate includes taxes, labor costs, etc.

I have a 2009 13"MacBook pro running on OS X 10.6.8. How do I know whether this is leopard or mountain? What would you advise that I use as I need to be running OS X 10.7? All help appreciated. Thank you.

I have a 2009 13"MacBook pro running on OS X 10.6.8.
How do I know whether this is leopard or mountain?
What would you advise that I use as I need to be running OS X 10.7?
Also can you advise how I upgrade please?
All help appreciated. Thank you.

Thank you for your response Niel.
I do run Microsoft Office 2011 - will Snow Leopard support this?
Finally why snow leopard and not mountain lion?

How can I delete everything off of my MacBook Pro 2009?

How can I delete everything off of my MacBook Pro 2009? I am selling it. If I reset to factory settings I will lose all the updates and I don't have those disks anymore! need to do ASAP! Please help!
Best Rgards

Take a look at this:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
Ciao.

I have a 2009 17" macbook pro .... how do I connect two 24" Viewsonic VX2450wm-LED monitors.

I purchased two 24" Viewsonic VX2450wm-LED monitors to connect to my 2009 17" macbook pro.
The monitor inputs is DVI. Since the plugs do not match up...an oversite on my part when buying the monitors online, I am hoping to run these 2 monitors from mini displayport to DVI. However, 2 external monitors requires a hub like the DualHead2Go DP Edition
However! This device has many poor reviews on Amazon and I am concerned about spending the money and wasting the time on a device when there may be a better option.
At this point I dont plan on using the macbook screen while using the twin 24" screens.
The answer to this problem is not an easy one to solve and the answeres to my questions I am finding are bringing up new concerns...for example, learning that the Matrox above mentions that Hz compatability which i had never previously though of, may have been a problem to consider...depending on the monitor...however, i think im good here.
Can someone baby step me through the process and exactly what components I need to get these 2 External monitors working properly via my macbook pro?
Note: Please do not be an arrogant computer d!k. I have already had 1 person act like a smart @ss when all I need is a real answer...not someone else Googling a 10 second easy answer and responding with sarcasm...I am quite familiar with a Boolean search...thanks but I am looking for someone with EXPERIENCE...not a search engine
*Would it be easier or cheaper for me to return these moitors and get different monitors with different plugs?
I appreciation all the input and assistance anyone can provide...I'm pretty new to the mac world.
BTW.
The system will be used for the Adobe CS5 Suite (mostly Illustrator and Photoshop), Pro Tools 10, Serato SL3, Video Editing (mostly iMovie) and browsing.
MacBook Pro, Mac OS X (10.5.8), 2.66 GHz COre 2 Duo 8 GB RAM

Hey drexfarrakhan,
Thanks for the question. For video, you can use a Mini DisplayPort to HDMI cable or adapter. Our online store has a few offerings:
Mini DisplayPort to HDMI - Apple Store (U.S.)
http://store.apple.com/us/search/Mini-DisplayPort-to-HDMI#!
However, your MacBook only supports video out via this connection:
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
So you’ll need an external stereo or speakers to output the sound to, using the headphone out port and a 3.5mm cable (or adapter, if needed):
MacBook Pro (17 inch, Early 2009): External ports and connectors
http://support.apple.com/kb/HT3407
Thanks,
Matt M.

Mid 2009 13" MacBook Pro wont boot up.

The apple store replaced the cable that went to my hard drive on my mid 2009 13" MacBook Pro. The hard drive still will not boot so they told me to remove it put it in a box and connect it to another computer and save the files. I have done that and connected it to my father's MacBook Pro. I can find the external drive but I don't know what to do next.
My goal is to save the files on his computer then reinstall the hard drive in my computer and start up in restore mode. Next I will reformat the drive and move the files I placed on my fathers Mac back to mine.
Can anyone help me with where I can get step by step instructions to do this?
Thanks

I think you mean Office for Mac. In any event, the standard applications will come with the reinstall, like Mail, iTunes, etc. Anything else won't. If you have the original disks the machine came with, the iLife apps should be on there.
I have to say this... I know you probably don't want to spend money on this, but if the data is important, the better way to handle this is to buy another hard drive. They're cheap. I can tell you how to prep the new drive if you don't know how. Then run Migration Assistant when you're done and let it try to pull over all your stuff from the old drive. Once all that is done, you can reformat your old drive and you'll have something to use for backup. You don't say how big your current drive is, but even a 1TB is well under $100 now. The reason I suggest this is because if you miss anything important on your old drive, once you format it it's gone. The way I'm suggesting, you'd be able to make sure you have all you need first.

Mid 2009 13" Macbook Pro Battery died

Hello,
I was ready to have my MacBook Pro formatted when I realized that it would not change and it now works with the power cord when connected.
How do I know which model/Part number it is? or the information that I need to purchase the battery. I am not currently in the states and I will have to purchase it online. Any recommendations?
It's a Mid 2009 13" MacBook Pro
Thank you in advance!

it now ONLY works with the power cord, when connected of course...

2009 15" MacBook Pro Hard Drive Issues

Hey everyone,
I'm having some trouble with my mid 09' 15" MacBook Pro, 2.53 GHz, 8GB RAM, 250GB Hard Drive running 10.7.2. Recently, my hard drive failed and I have AppleCare so it was replaced for free. The computer came with a 250GB drive which means it had to be replaced with a 250GB drive from Apple.
I work for an Authorized Apple Reseller (privately owned - not corporately owned apple store) and they can complete machine repairs here and they ordered/replaced the apple drive for me.
Here is my issue: I am a film/video production student and as a result I do a lot of video editing/web design. My 250GB hard drive is no match for working with a lot of HD quality video, it's a space hog! I'm very technically savvy and an replace RAM and hard drives in machines myself since I work for an Authorized Apple Reseller. I've purchased internal 500GB drives to replace my 250GB drive so I can have more space to store/work with video.
My machine can't seem to read or work with any 500GB internal drive I purchase and install. I've used 2 different Western Digital 500GB 5400 RPM drives, a Seagate 500GB 7200 RPM drive and even a Hitachi 500GB 7200 RPM drive. I've used Carbon Copy Cloaner to copy my information from current 250GB drive to the new 500GB drives and they will boot but they run like crap! They will work....I attempt to open an application and i get the rainbow spinning wheel of death and the machine will then freeze for 5 minutes. I can use it again for 30 seconds after which it freezes again for another couple minutes and this just goes on and on.
I've also tried installing Snow Leopard fresh onto the drive and manually moving my content over via an external drive or something. Same result! I couldn't even install Snow Leopard completely without the install failing.
None of the service techs at my work can answer my problems, they've never seen it before. AppleCare was no help on the phone. Also, my machine passes all of Apple's service diagnostics.
Can anyone think of anything else I haven't done to help me?! I would really appreciate it!
Thanks guys!!

Have you replaced the SATA cable to the hard drive?
Can I suggest you consider external storage for your video production?
No matter how big a drive you install in your MacBook Pro it will quickly fill up.
There are a number of external drives available specifically built for video editing.

How do I find iChat on my new MacBook Pro?

Can anyone help me with finding how to get to iChat on my newest MacBook Pro? I believe it's now been replaced by iMessage, but I can't figure how to video chat on this laptop.

Can anyone help me with finding how to get to iChat on my newest MacBook Pro? I believe it's now been replaced by iMessage, but I can't figure how to video chat on this laptop.

How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

http://www.lightroomqueen.com/2009/02/28/how-do-i-move-lightroom-to-a-new-computer/

2009 15" MacBook Pro won't recognize battery

A little history: I had an '09 MacBook Pro 13" and it was stolen from my hotel. Long story short, I was pretty much S.O.L. So, I decided to buy a new mac. After deciding against a new one ( I need the disk drive) I found a good one on eBay. Enter my 2009 15" MacBook Pro 3.06 Ghz/anti glare screen (very pleased with it).... EXCEPT, I can't charge it. Originially, there was a black "X" where the battery percentage is supposed to be. However, after resetting the SMC there is nothing where my percentage should be, no picture of a battery, no "X", just..nothing. So, I come here for the vast knowledge of you good people, hoping that yall may be of some assistance.
Recap:
Old laptop was stolen
bought new one on ebay
battery indicator showed black "x"
reset SMC
battery indicator shows nothing
see below for more info
Battery Information:
Charge Information:
Charge Remaining (mAh):          0
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          0
Health Information:
Cycle Count:          0
Battery Installed:          No
Amperage (mA):          0
Voltage (mV):          0
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Sleep on Power Button:          Yes
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Sleep on Power Button:          Yes
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
Charging:          No

Well, I made the trip to the Apple store. After taking my mac behind closed doors for around 5 min, the "genius" came back and said my problem is the logic board, $310 fix. He also mentioned that when they send it in the technicians may or may not replace my logic board due to the fact that the previous owner has done some under the hood "tinkering". So, basically, I could be out $310 just for them to tell me they won't fix it
A few questions for the community:
Wouldn't I have other issues if my logic board was bad?
They didn't mention anything about my battery, could I ask apple to replace the battery to try that fix before assuming the previous owners tinkering wrecked the logic board?
Should I try to sell it and go for a new MBP?

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How to replace motherboard on a 2009 17" macbook pro?

Similar Messages

Maybe you are looking for