How to replace old ipod with new one

I have just got an iPhone 64gb as my 32gb iPod touch is full. How do I transfer the contents from my old iPod to my new iPhone? It should be simple but doesn't seem to be!

Thanks. I think the problem is that the c:drive on my computer is full and so it does not have the capacity to do it. I have a new computer and have managed to copy the downloads on to the new computer but it won't sync the rest of the music because I think the old device is the registered device. If that makes sense!

Similar Messages

Replacing Old characteristic with new ones in a Cube

Hi,
I have 3 Z InfoObjects for capturing time information like the month, year and week. The user is requesting for variables like current month, current year etc on these variables frequently. I have written customer exit for bringing the current week etc values on the Z InfoObjects.
However, I want to avoid writing of the code in future and hence have created 3 more InfoObjects which reference to the standard time characteristics, i.e. the Z month InfoObject will refer 0CALMONTH etc. so that the standard variables of 0CALMONTH can be used for our Z InfoObjects also. Now I want to replace the old InfoObjects with these new InfoObjects(the ones referencing the standard time characteristics) in a InfoCube. My question is how do we get the historic data for these new InfoObjects as the Historic data is in the old Z InfoObjects. Any thoughts/suggestions would be helpful..
thanks in advance.

<i>Generated export Datasource of the InfoCube after adding the new 3 characteristics. Then in the Update Rules mapped only these 3 characteristics with the old characteristics and did a full upload.</i>
You need to map the 3 old Characteristics to the 3 new ones, and you need to map all the other InfoObjects too.
In the following I refer to the 3 old temporal Charactersitcs as T1, T2 and T3 - and to the 3 new temporal Chars as T1', T2' and T3'. The other (old) Chars are referred to as Cn, and the Key Figures as KFn:
T1 --> T1'
T2 --> T2'
T3 --> T3'
C4 --> C4
C5 --> C5
KF1 --> KF1
KF2 --> KF2
After the load you should delete the old requests to avoid data duplication.
<i>I was expecting that the record will have the new characteristic and also the value in it after the load. But it is not happening.</i>
I reckon you don't have any value because you haven't mapped the Key Figs (as well as severlal Characteristics) in the Update Rules.
Regards, Davide

How to replace old numbers with new mavericks version of numbers

Thanks to another thread, I have found the new versions of numbers, pages etc. in applications, but how do I get them to replace the old versions in the desktop?

Good call since Apple dumbed down the new iWork apps to make them compatible with their iOS counterparts.
See
http://www.betalogue.com/2013/10/24/pages-5-disaster/
https://discussions.apple.com/thread/5468056?start=0&tstart=0 and
http://9to5mac.com/2013/10/25/new-iwork-ilife-apps-go-for-simplicity-upset-power -users-all-over-again/#comments

How to replace old soundtrack with new?

Exporting from Keynote my presentation is a movie.mov and a separate moviesoundtrack.mov - how do I use QT pro to combine the two to run simultaneously (not sequentially)?

Oops. I was intending to reply to a different thread.
But on the subject you can open the new audio track, Select All and then Copy, then move to the video track and use Add to add the sound to the video track.
You should be able to remove an existing track by using Delete Track from the Edit menu.

How to intigrate old APPL_TOP with new Product. R12

hi All,
I am upgrading APPS 11.5.10 to R12.
I am sucessfully upgrade Apps file system and database.
And R12 services and Database service are running sucessfully.
But Problem is that i want to use OLD Business Flow means I want all old form and report behiver.
Means how to intigrate old APPL_TOP with new Product. R12.
thanks
c2

Hi,
For custom forms and reports, you need to open it using Forms/Reports Builder 10g, compile it, and upload it again to the server.
For the CUSTOM_TOPs, make sure it is set in the custom<CONTEXT_NAME>.sh file under $APPL_TOP, and in default.env file on the Applications tier.
Note: 563258.1 - How To Upgrade 11i Custom Forms And Reports To R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563258.1
Note: 552010.1 - Can't Open Custom Forms After R12 Upgrade
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552010.1
Note: 451934.1 - Accessing Custom Forms After Upgrading From To R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=451934.1
Regards,
Hussein

Recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

Are you sure? I restored my new iPod from the backup of my iPad and all app data was restored to the new iPod.. App data is part of the backup.
iPhone and iPod touch: About backups

Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help.

Replaced my hardrive with new one. but when i turn the computer on, the hardrive doesnt show. pls help

Before installing a new drive - it is generally better to install it in a external usb enclosure and connect it to your Macbook so you can format/erase the new drive and make an exact clone of the drive you wish to install, unless you plan on doing a clean install.

Replace playing video with new one in osmf player

Hi,
I have a problem with loading new video in osmf player. First video is loaded from the emmbed code, and I use ProxyElement to comunicate with MediaLEment and to load my plugin. But after some actions in my plugin I need to load another video in the Player. By changing the DisplayedObject from the proxiedElement I am loading the new video but the old video from emmbed code is still runing on the back. Does anyone know how to remove mediaElement created by the player or to replace with new one, ot at least to disable that video from playing. I tried with everything and it doesn't work.
Thanks

hi,
you can change into new Data Source.
From new Data Source you can load data into the old ods.
but if you want to kepp the old records as it is, then don't delete data in the ods.
hope this helps......
Rag
Pra

How can I replace my old Airport with new one and keep my network?

I want to replace my 5+ year old Airport Extreme (runs 802g)
Would appreciate advice on how I can set up the new Airport Extreme and maintain my current network (my printer, Apple Tv etc are all signed into my network, would like to keep my network.
Is there a way to transfer settings from the older Airport Express to the new one?

Sorry for confusion; I have a 5 year old Extreme, want to install a new Extreme
Have an older Express as a range extender ad I have a new Exrpress I would set up likewise
Cable modem connnected to the Extreme via ethernet cable
Computers and printer are wirelessly connected to the network

How do I get music from my old ipod to new one please ?

I have tried bbut cannot seem to get music from my old ipod to my new ipod. I lost old one long ago and recently found it and much loved n' missed songs . I since replaced pc and saved no music . I tried connecting both ipods to my laptop but no luck getting songs from old to new !! Any help would be greattly appreciated pelase n' thank you :-)

Hi Lea64!
If your music was ripped from CDs, you will need to re-rip it to your iTunes library on your new computer. But if you bought your music from iTunes, they are still in iCloud, and you can redownload them at no cost. Sign in to the iTunes Store on your computer, then click on "Purchased" on the list on the right hand side. You'll see everything you have ever bought from iTunes in there, and anything that's not currently on your computer will have a little cloud with a downward pointing arrow in it. Click on the cloud symbol next to whatever you want to download, and it will download to your computer. Plug in your iPod and synch it, and you're done. Hope this helps!
Sandygirl

How do I transfer library from my old ipod to new one?

Hi
I was given a new ipod nano for christmas which I have registered but I can not work out how to transfer the library from my old nano to my new nano. I have a new laptop which doesnt have all the original files on so wonder if it is even possible? Any help is really appreciated
thanks
Bristolgal

found it!here it is http://www.getsharepod.com/
you just have to install this software, connect your old ipod, copy all the files inside your old ipod to your laptop and after that put them inside the new one!

Replaced iPod with new one but do i have to intall itunes again?

Hi, i have just recently replaced my ipod mini with an ipod video. Do i need to re-install itunes with the new ipod or can i just plug in the new ipod and transfer all of my songs onto it?
thanks
iPod Video Windows XP

If you have iTunes 7, just plug in the new iPod.

Replace of Old ITouch with new one?

I have to change my Ipod touch of 2nd generation to the latest one.
Is it possible that I will give this one and take the new one by giving some amount??
Do we have this kind of Facilities in Apple IStore?

Apple will give you a 10% discount is you turn in an old iPod and purchase a new one.
Apple - Recycling Program for iPod and Mobile Phones
You are likely better off selling the old one yourself.

Old iPod broke, new one by mail but extended warrantee gone?

Hey guys, Problem!
OK. I sent in my iPod because the HDD Crashed. I got my ipod july of last year. I got back a brand new iPod, except with a new SN.
Now recently, my earbud's wires were somehow stripped and wires snapped off near the base, and noe there is no sound. I have gotten a new pair easily before for free because I have the extended plan which allows me to just fill out a form and get a new pair of earbuds the next day, and i have done this twice before.
But just now, I logged on to the support page and filled out the Service Repair form for a new pair, and it said that my warantee expired. So I tried my old iPod's SN and it said the same thing.
Does this mean that when they send you a new iPod, that you have to buy the extended service plan again!? I thought this is why I bought the plan in the first place!
PLEASE. Anyone out there that would know, do I have to buy the plan again to get my earbuds replaced with cost covered and not pay the fee?
MUCH appreciated,
Tim.

Hey!
wow the same thing as happened to me!
i was driving with some of my friends(2 other people)and we plug in my first friends ipod and it work for about 5 minuets and we just thought it died so then me and the other friend both were like well our ipods are about to die too, but anywayz we tried my 2nd friends ipod n sure eneougt it was dead, so then we were like okay let's try mine so we did, and once agian it died we reallyy didnt thing any thing of it! until i got home n tried tied to charge it, and it still wouldnt turn on! and so i was like, okay ill go to work and come home and see then. once i got home from work it still was working and i tried retoring it and it still dosent work!! then i relize were the cor plus into your ipod it was all burnt!, so ill called my oter friend and there ipods were burnt too! And so yesturday i called griffin and they were like this has never happened before and so my mum researched it and sure enough it has!And tey offered to replace te itrip, but i was like what about the 7000$ in ipods, compared to a 20$ ting? and mine and one of my friends ipod isnt even 4 months old yet! what do you sugest i do?!

How to integrate old formula with new as needed?

I have a report which displays /processes rows based on the 'Product Family' which we have as a 3 char code.
stringVar first3 ;
first3 := Mid ({REFERRF.RFDTA},1,3);
if isnumeric(first3) then
    Mid ({REFERRF.RFDTA},4,30)
else
    Mid ({REFERRF.RFDTA},1,30)
However, the current report makes it's own grouping which the user wants to keep. he does want the new groups that I can get from that table as well. how do I integrate this formula?
also new ones are custom and need to be separate from retail. so need to process this old way first. then not process these groups again (TRR, TRC etc) when processing by getting from table.
SELECT {Command.PROD_FAMILY}
    CASE "TRR","TRC","TRP":
        "Trophies"
    CASE "PLQ":
        "Plaques"
    CASE "SGL", "TGL":
        "Crystals"
    CASE "MDL":
        "Medals, 2 in."
    CASE "MDM":
        "Medals, Insert"
    CASE "PIN","PNI":
        "Pins"
    CASE "CAC":
        "Acrylics"
    default:
        "UNDEFINED: " & {Command.PROD_FAMILY};
so when my table has "CAC" I need the display heading to read 'ACRYLICS' in my logic i am getting the description from the same table but he doesn't want that for the above, only for any others.
the report looks like this> so u see for CAC they want it displayed as ACRYLICS. If I keep the current logic when i read the table i have to not read for CAC. or do this some other way.
Acrylics
Price Break
Range
Number
of Orders
Number
of Units
Total Cost
Total Sales
1. 1 - 5
837
1,642
5,327.06
42,384.95
2. 6 - 9
121
862
2,403.05
20,956.90
3. 10 - 24
150
2,148
5,718.42
44,584.85
4. 25 - 49
32
1,083
2,956.16
22,714.85
5. 50 - 99
21
1,354
3,532.94
24,846.30
6. 100 - 249
7
868
2,586.26
14,712.60
7. 250+
2
1,800
2,470.17
12,258.50
1,170
9757
24,994.05
182,458.95

Hi,
The standard behaviour is that new instances of the process will use the most recent version of the process that has been deployed to the database. This allows you to deploy new versions of the processes without impacting on processes which are already in progress.
When the workflow engine determines what activity to run next in the process, the engine checks what the start date of the process instance was, so that it can check what version of the process was active at that time. If you update the start date for each running process, so that it reflects the date that you saved the most recent version of the flow, then the workflow engine will use the latest version instead of the version that it was running.
This is not supported. I would never suggest that you do this in a production environment - it does not make sense to be making frequent changes to the process in a production environment, since there is no supported mechanism for forcing existing flows to use the new definition. The engine is designed specifically to run the same version of the process for the duration of the process instance - what you want to do is to blow this out of the water completely. If you do change this, then all timing that is recorded against the activities becomes useless, and the other impact on the workflow process us something that you would need to consider incredibly carefully before deciding whether you want to take the risk.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

How to replace old ipod with new one

Similar Messages

Maybe you are looking for