How to replace old number with a new number in imessage

How do you add a new number in imessage when there an old one there already. For iphone

//What do i put here?=newcellnum
book.setCellNumber(newcellnum);

Similar Messages

Replacing old photo with a new one

A few years back I imported some of my photos off of a photo cd that came with my prints. Now I am scanning the negs at a higher resolution than they supplied on the photo cd. My question is.. is there anyway to replace the old photos with the new photos so that all of my faces, places, dates, keywords etc. will remain intact?

Also make sure you've renamed the new file exactly the same as the old file, same case, format, etc.
OT

How to replace old ipod with new one

I have just got an iPhone 64gb as my 32gb iPod touch is full. How do I transfer the contents from my old iPod to my new iPhone? It should be simple but doesn't seem to be!

Thanks. I think the problem is that the c:drive on my computer is full and so it does not have the capacity to do it. I have a new computer and have managed to copy the downloads on to the new computer but it won't sync the rest of the music because I think the old device is the registered device. If that makes sense!

How to replace old numbers with new mavericks version of numbers

Thanks to another thread, I have found the new versions of numbers, pages etc. in applications, but how do I get them to replace the old versions in the desktop?

Good call since Apple dumbed down the new iWork apps to make them compatible with their iOS counterparts.
See
http://www.betalogue.com/2013/10/24/pages-5-disaster/
https://discussions.apple.com/thread/5468056?start=0&tstart=0 and
http://9to5mac.com/2013/10/25/new-iwork-ilife-apps-go-for-simplicity-upset-power -users-all-over-again/#comments

How to replace old soundtrack with new?

Exporting from Keynote my presentation is a movie.mov and a separate moviesoundtrack.mov - how do I use QT pro to combine the two to run simultaneously (not sequentially)?

Oops. I was intending to reply to a different thread.
But on the subject you can open the new audio track, Select All and then Copy, then move to the video track and use Add to add the sound to the video track.
You should be able to remove an existing track by using Delete Track from the Edit menu.

HT1212 How can I sync an old iphone with a new number to itunes. The new phone with old number is still syncing ok?

How can I sync an old iphone with a new number to itunes as I am already running a new iphone with an old number??

Thanks it just wont work needs a passcode but that code is for the new phone. Will go to Apple shop tomorrow.

I loaded my phone on my old mac book and have since replaced that book with a new a new one. I have new music that wont sync up with my phone. Anyone have any ideas how to get my new music onto the phone?

i loaded my phone on my old mac book and have since replaced that book with a new a new one. I have new music that wont sync up with my phone. Anyone have any ideas?

If this is a question about syncing with iTunes, you might want to post it over in the iTunes forum.

I replaced my old iphone with a new one and i lost it i want the s/n of the new one

i replaced my old iphone with a new one and i got it without the box today my new iphone is stolen and i need the serial number of the new one
thanks

Read here for the various ways to locate the SN:
http://support.apple.com/kb/HT4061

Replacing Old characteristic with new ones in a Cube

Hi,
I have 3 Z InfoObjects for capturing time information like the month, year and week. The user is requesting for variables like current month, current year etc on these variables frequently. I have written customer exit for bringing the current week etc values on the Z InfoObjects.
However, I want to avoid writing of the code in future and hence have created 3 more InfoObjects which reference to the standard time characteristics, i.e. the Z month InfoObject will refer 0CALMONTH etc. so that the standard variables of 0CALMONTH can be used for our Z InfoObjects also. Now I want to replace the old InfoObjects with these new InfoObjects(the ones referencing the standard time characteristics) in a InfoCube. My question is how do we get the historic data for these new InfoObjects as the Historic data is in the old Z InfoObjects. Any thoughts/suggestions would be helpful..
thanks in advance.

<i>Generated export Datasource of the InfoCube after adding the new 3 characteristics. Then in the Update Rules mapped only these 3 characteristics with the old characteristics and did a full upload.</i>
You need to map the 3 old Characteristics to the 3 new ones, and you need to map all the other InfoObjects too.
In the following I refer to the 3 old temporal Charactersitcs as T1, T2 and T3 - and to the 3 new temporal Chars as T1', T2' and T3'. The other (old) Chars are referred to as Cn, and the Key Figures as KFn:
T1 --> T1'
T2 --> T2'
T3 --> T3'
C4 --> C4
C5 --> C5
KF1 --> KF1
KF2 --> KF2
After the load you should delete the old requests to avoid data duplication.
<i>I was expecting that the record will have the new characteristic and also the value in it after the load. But it is not happening.</i>
I reckon you don't have any value because you haven't mapped the Key Figs (as well as severlal Characteristics) in the Update Rules.
Regards, Davide

HT204053 When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

1. Launch the App Store
2. Select Store->Sign Out
3. Select Store->Sign In and replace the Apple ID with the one you want to use

I want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ?

i want to know if there is any possibility to replace my old macbook with a new one and pay a price difference ? I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money? If not does anyone have another suggestion how not to pay that much money to buy a new one and/ or maybe seling my old one for some money ?
Thank you would appreciate any help !

RockayaAbdel wrote:
I have a 2008 Macbook that is slowly failing on me and i wanted to know if there is any possibility to bring it to an apple store and swap it with a newer one and pay a small amount of money?
No. but you can sell it privately and use the proceeds towards a newer used model.

How can I recover my old account with a new one?

Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
How can I get acces to my old account with a new Adobe ID?
I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
what can I do?
Thanks

Thanks Romshina
I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
now this is my new email, because the las one it was hacked and I just can't get back to it.
So I would like to have access to my account and update this new email account, to have acces to my CC account.
Thanks
Date: Fri, 27 Dec 2013 06:51:15 -0800
From: [email protected]
To: <Removed by Moderator>
Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
    Re: How can I recover my old account with a new one?
    created by Romsinha in Adobe Creative Cloud - View the full discussion
Hi Guillermo Castellanos,
Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
Regards,
Romit Sinha
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do i replace an asset with a newer version?

let's say i have an asset which is a Photoshop file, filename "v1". i want to replace the asset with a newer version of the Photoshop file, filename "v2".
how do i replace the "v1" asset with the "v2" asset, so that all instances of "v1" in the project are changed to "v2"?
thank you.
rev B 20" iMac G5 Mac OS X (10.4.2)

let's say i have an asset which is a Photoshop file,
filename "v1". i want to replace the asset with a
newer version of the Photoshop file, filename "v2".
how do i replace the "v1" asset with the "v2" asset,
so that all instances of "v1" in the project are
changed to "v2"?
thank you.
rev B 20"
iMac G5 Mac OS X (10.4.2)
I usually just write over the file with the same file name, often with DVDSP closed.
If you're doing an m2v file and the duration has changed, just go the the end of the clip in the track and drag it right as far as you can. Otherwise it'll replace the asset but use the previous version's duration.
G5 Dual 2GHz Mac OS X (10.4.4)

How do I replace the organiser with a new one

How do I replace the organiser with a new one

The problem is to understand your question (or your two questions : do you both mean the same thing ?)
An answer to Hatstead question would help.
1 - Do you really mean using another software to organize your workflow ?
2 - Do you mean using other softwares based on folders rather than databases ?
3 - Or do you mean working with different catalogs ?
If you don't want to use the Organizer, it's not possible to 'delete' it, but it is simple not to use it.
Most other organizing solutions include the choice of selecting PSE editor as the external editor
There are various solutions depending on your platform : Windows, Mac, Linux...
It's important to know if you prefer the folders or database organization to suggest possible solutions.

How to intigrate old APPL_TOP with new Product. R12

hi All,
I am upgrading APPS 11.5.10 to R12.
I am sucessfully upgrade Apps file system and database.
And R12 services and Database service are running sucessfully.
But Problem is that i want to use OLD Business Flow means I want all old form and report behiver.
Means how to intigrate old APPL_TOP with new Product. R12.
thanks
c2

Hi,
For custom forms and reports, you need to open it using Forms/Reports Builder 10g, compile it, and upload it again to the server.
For the CUSTOM_TOPs, make sure it is set in the custom<CONTEXT_NAME>.sh file under $APPL_TOP, and in default.env file on the Applications tier.
Note: 563258.1 - How To Upgrade 11i Custom Forms And Reports To R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563258.1
Note: 552010.1 - Can't Open Custom Forms After R12 Upgrade
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=552010.1
Note: 451934.1 - Accessing Custom Forms After Upgrading From To R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=451934.1
Regards,
Hussein

How to replace old number with a new number in imessage

Similar Messages

Maybe you are looking for