How to replace original submit_mc?

Hello
I have an FLA file which came with an online tutorial on how
to send emails from Flash MX 2004.
I wish to incorporate it into my own site and have done most
of the work which this involves.
However, the original came with a huge, ugly 'Submit' button
(submit_mc) and I would like to replace it with my own JPEG
'Submit' button which is more subtle and attractive.
How do I replace the original with my own, that is, how do I
substitute my own while assuming all the properties of the original
submit_mc?
Many thanks.
Steve

Steve,
If the original .FLA file has all the graphics in the
library, you should be able to get the properties of that submit
graphic in terms of dimensions and pixel size. Create your own
button with those dimensions, and then, go into flash, view the
properties of the ugly submit button (the original graphic, not the
movieClip) and there should be an "Import" button. You can choose
this and if you import your graphic, it should replace the old one
with yours. I don't have MX2004 here, so it's possible that button
is called something else, so someone can let me know if I'm wrong
there. That should do it.
- B

Similar Messages

How to replace original photos with modified ones?

Hi from Paris France ,
is there a way to get rid of original photos and replace them by the modified ones (ie "modified" are becoming "original")?
Thx

it is bad philosophy anyway...
Actually iPhoto is following the digital asset management best practice philosophy of always keeping a digital negative untouched and intact. iPhoto is an entry level DAM application for the general public. To do what you want you might look into the more advanced DAM applications that will let you do what you want. You can learn about them at The DAM Forum for professional photographers.
I use Media Expression which I think is one of the best as my primary DAM and iPhoto for special projects. But alas it doesn't not have Faces and Places. It does read geo-tagged image files but you'll have to assign "Location" identity to them by editing the IPTC metadata fields with EM.
One method to avoid having the portrait photos modified by iPhoto it to upload the photos to a folder on the Desktop before importing. There you can losslessly rotate those files that need it. It also gives you an opportunity to rename the files to something more informative that IMG_001.jpg.
OT

How to replace original photos?

I am helping my mom set up her iPad. We bought her a used one, generation 1 with ios 5. Every photo editor we have tried saves edited photos as a new photo. It's making tons of copies of photos that she just doesn't need. Even a simple edit, like rotate, makes a new photo.
Is there a way to change the settings in Photoshop Express so that the edits replace the original? For non-photographers who don't care about retaining the pristine original copy (which probably isn't that great in the first place), this would be an ideal option.
If Photoshop Express can't do this, can anyone recommend an app that does?
Thanks so much,
Angie

Photoshop express always creates a new copy of the edited photograph in order to preserve the original image. Also we do not provide a setting to do so.
Thanks,
shuchi

How to replace original JTree node with + and - sign or icon??

Dear friends:
I have following code for JTree:
import java.awt.BorderLayout;
import java.awt.Container;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTree;
public class TreeSample {
public static void main(String args[]) {
    JFrame f = new JFrame("JTree Sample");
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = f.getContentPane();
    JTree tree = new JTree();
    JScrollPane scrollPane = new JScrollPane(tree);
    content.add(scrollPane, BorderLayout.CENTER);
    f.setSize(300, 200);
    f.setVisible(true);
}Here, when I click any node to explore its children, right handle pointer become down handle Pointer, but if I hope to change this right handle pointer to + sign or icon; and to change this down handle pointer to - sign or icon; how to do it, ??
Is there any simplest way instead of using ImageIcon ????
Thanks
sunny

You have to use Windows look and feel instead of Java look and feel.
http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html#display

How much if replace original battery iphone 5S?

My iphone battery suddenly decrease from 100% to 90% in 2-3 minutes. So how much if i do replacement original battery at Authorised Service Provider. Please assist me..

Your 5s is still under warranty. Take it to Apple or authorized service center, in the same country in which the phone was purchased new, and they will exchange it free, it they can verify the problem.
https://locate.apple.com/country

How oracle replaces "carrage return, tab and blank" in v$sql.sql_text??

Hi. all.
I am wondering how oracle replace "carrage return, tab and blank" character to v$sql.sql_text??
I am try to find sql_id by the following query.
select * from v$sql where sql_text like 'blur blur %'.
However, how can I specify 'blur blur %' when the original sql text includes "carrage return, tab, amd double blank"?
To be more specific,
the original sql statement:
select
col_a,
col_b , -- tab character included
colc , -- more than one blank included
Then, how can I specifiy "sql_text like 'blur blur %'" ??
As far as I know, oracle replace "carrage return, tab, and more than one blank" to "ONE BLANK" character.
Is this right???
Thanks in advance.
Best Regards.

Oracle simply unformat the SQL text and put it into v$sql.sql_text because SQL formatting is only for reading and clearity purpose. It don't help to generate SQL_ID and execution plan. You may get couple of freely avilable SQL formatting tool on the internet, you can simply copy SQL_TEXT and if you paste them into those tool, they will auto format, tab, upper and lower case of required words.
If you find this reply helpful or correct, please mark accordingly because you asked 17 questions and zero answerred. This seems that this forum is 0% useful to you! (sad)
Regards
Girish Sharma

How to replace a disk within a parity space

I have been searching the net for better documentation on this, but so far not a lot of information on what happens when I want to do the following (this is for home use - I am not a storage admin):
I had a JBOD array with 8 disks in it. 3x3TB and 5x2TB. I had this array thin provisioned to 45 TiB. When I hit about 13 TiB of storage, the drive stopped accepting new data and it was time to expand. This made sense to me as I had
about 19 TB or 17.3 TiB of room, minus parity, I'm about there. Perhaps I could have done more to maximize usage, but that point is moot now. What I did was buy and add a new 4TB disk to the array.
I had a Storage Pool containing all my disks, and I added this new 4TB disk to the pool. I had a Virtual Disk sitting on that pool in Single Parity mode. After adding the drive, I was unable to get the existing virtual disk to use that drive.
I imagine this was due to the number of columns previously allocated to the array. I had some ideas on how to offload the data into a new Virtual Disk with more columns, but nothing really worked, so I bought 3 more 4TB disks, reduced my data footprint
to 12TB, copied everything off, and destroyed the array.
Next I re-built my media server and put the original 8 disks in place, along with the fourth new 4TB disk, as well as a 200 GB disk, a 600 GB disk, and a 1.5 TB disk that I had laying around. I'm in day 2 of my copy operation from BackupDrive1
to the new 12 disk array. When that completes, I want to use that disk to replace the 200 GB disk I was using as a placeholder.
Everything I read on the internet has been inconclusive to me thus far. Microsoft's own documentation claims that replacing a disk is as simple as removing the old disk and adding the new one, but I don't think it is. When I tested this
using the 4TB disk and the other 3 oddballs with a smaller subset of data, it definitely wasn't as easy as that.
My intuition tells me that what I am supposed to do is power down the server and replace the disk I intend to replace, then add that disk to the now degraded storage pool. At that point I should remove the old drive from the pool and repair the virtual
disk. However, I am nervous that "removing" a drive will decrease the number of columns, and that in the end I won't be able to use the space from the 4TB drive. I've seen questions on the net on how to replace a disk and none of them
seem to specifically apply to parity spaces, most are talking about either simple spaces (not happening) and mirror spaces. I understand the difference but Microsoft's implementation of this is not as straightforward as other products I have used.
In other cases it was as simple as this: Physically replace disk, receive prompt that your old disk is missing, but you have a new disk, and would you like to rebuild the data from the old disk on the new disk? Yes? Then wait patiently while
we painfully write 4TB of 1's and 0's and you're good to go. I want this button in Storage Spaces please.

Shaon,
Thanks for your reply. However, this does not sufficiently answer my question.
The 200GB, 600 GB and 1.5 TB drives are temporary drives, since from my experience, adding drives to an array with 8 or more drives does not work. I want to replace these drives with 4TB drives, leaving the smallest drive at 2TB.
Also, I was under the assumption that parity (which I'm imagining works in storage spaces somewhat like RAID 50), claims a space for parity equal to the size of the largest drive in the bunch, not the smallest, leaving me with a total space equal to the sum
of the drives minus 4TB.
I have experimented with the suggested workflow, but through the GUI this does not work. I add the new drive, remove the missing one, and get a popup explaining that my virtual disk will be "In Repair". However, this popup vanishes before I can
click OK (almost certainly a Microsoft bug). If I click OK before I finish reading this, nothing happens. The drive doesn't repair. I need to retire the disk through PowerShell, and then use PowerShell to repair the virtual disk. This
works out OK for a while, but once I start using it, the new drive infallibly gives me an error of "Stale Metadata". I have tried this with 3 different 4TB drives, so I have doubts that this is actually a hardware issue with the drives. More than
likely, this is a false positive caused by an issue with Storage Spaces. It does give me pause on continuing to use the disk, so I end up swapping the old 200GB disk back in every time and the space works fine at that point. Right now I am attempting
to replace the 1.5 TB disk instead, to see if that does anything. After that, I plan on running the Optimize-Volume -DriveLetter D -Analyze -Verbose cmdlet to attempt to rebalance the data on the disk. Should I expect that command to do anything
useful?
Just a side comment, this product has been around for a solid 2 years now. I've found the documentation to be almost non-existent, with the exception of one TechNet page that every question seems to have a link to in the answer. This page helps
almost no-one as it lacks in examples that apply to the questions that are asked. It gives little information on parity spaces, and does not equivocally answer the one question that many parity space users have, "What is the correct workflow for growing
my pool?" I understand that in a mirrored situation, you can't grow the pool without adding a certain amount of disks, but if parity functions anything like RAID 50, this should not be a limitation. It amazes me that this is the only document Microsoft
seems to have regarding Storage Spaces, and this single document has seemingly never been updated. Take this feedback however you will, I truly hope that more discussion will reach the right people and help Microsoft fix the issues with a product that
actually has a lot of promise.

How to replace missing export plugin in iphoto 9.4.7?

How to replace missing export plugin in iphoto 9.4.7? I am attempting to convert jpgs into html.

Reinstall from the original source?
LN

How to replace logic board battery ?

How to replace the Logic board battery ?

Several years ago, when the link went to a different content page and was
likely more useful to someone whose product may have/had warranty, then
it was of help. Now, to look back on several older posted links and click on
them, quite often will take the participant to http://www.apple.com/support/
no matter what the initial out-dated a link originally appeared to suggest.
Current info and links to sources may be found in the Support site.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
For other regions or countries, see Apple - Find Locations - Country selector:
https://locate.apple.com/country
re: Sales, Service, Training, Certification, Consulting; varies per region.
An Authorized Apple Service Provider may also be capable of restoring
function to older hardware; though getting replacement new parts is an
issue going forward, as it always has been, given new product change.
For other repairs, one should look to Specialists and that includes repair
companies whose only business is primarily to restore function to Macs.
A few examples exist, one of them is wegenermedia.com for portables;
since they can be more easily/less costly shipped than desktop models.
To post a comment to a stale and outdated thread, brings little to the table
of discussions; any issue from two to five years ago is not current today in
the fairness of those persons original to the topic thread. A newer issue by
any player should be presented in a new discussion topic thread.
In any event...
Good luck & happy computing!

I have given my ipad air 2 for replacement. How the replacement product will be? can anyone details?

My ipad air 2 got some speaker issue. so i went to service centre. They said THEY WILL REPLACE THE PRODUCT WITH NEW ONE. How the replacement product will be? can any give details about the product?

RAM@RAID wrote:
Thanks again. Is there any possibility that they can replace as a sealed box as a original one? OR usually they will replace like this?
Did i have any rights that i can as ipad in unsealed box?
what r the conditions they replace as unsealed box?
I brought ipad just 28 days back before this problem arrives...
I got my iPad Air replaced once due to a tiny crack on the back of the device. Apple replaces it with a brand new iPad Air but it doesn't come in a retail box (like the ones they sell at the stores). The replacement is in a brown box (if I remember correctly) with no markings. There's no charger/cable in the box. It's not a refurbished device. It's brand new.

My power and volume button is not working how i replace and how much charges??

my power and volume button is not working how i replace and how much charges??

$269
Out-of-warranty* cost:
iPhone 6 Plus: $329
iPhone 6: $299
iPhone 5s, iPhone 5c, iPhone 5: $269
iPhone 4s: $199
iPhone 4, iPhone 3GS, iPhone 3G, Original iPhone: $149

How to replace NULL values from main table

Dear all,
I like to remove the NULL values from a main table field. Or the question is how to replace any part of the string field in MDM repository main table field.
e.g. I have a middle name field partly the value is NULL in some hundreds of records, I like to replace NULL values with Space
any recommendation.
Regards,
Naeem

Hi Naeem,
You can try using Workflows for automatically replacing NULLs with any specific value.
What you can do is: Create a workflow and set trigger action as Record Import, Record Create and Record Update. So, that whenever any change will occur in the repository; that workflow will trigger.
Now create an assignment expression for replacing NULLs with any specific value and use that assignment expression in your workflow by using Assign Step in workflow.
For exiting records, you will have to replace NULLs manually using the process given by Preethi else you can export those records in an Excel spreadsheet which have NULLs and then replace all NULLs with any string value and then reimport those records in your MDM repository.
Hope this will solve your problem.
Regards,
Varun
Edited by: Varun Agarwal on Dec 2, 2008 3:12 PM

How to replace obsolete download function module in ECC6.0?

Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.

Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
          EXPORTING
               FILENAME            = p_filename
               FILETYPE            = DAT
          TABLES
               DATA_TAB            = T_DOWNL
          EXCEPTIONS
               INVALID_FILESIZE    = 1
               INVALID_TABLE_WIDTH = 2
               INVALID_TYPE        = 3
               NO_BATCH            = 4
               UNKNOWN_ERROR       = 5
               OTHERS              = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename    TYPE string,
       l_filen       TYPE string,
       l_path        TYPE string,
       l_fullpath    TYPE string,
       l_usr_act     TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
    DEFAULT_FILE_NAME    = l_filename
CHANGING
    FILENAME             = l_filen
    PATH                 = l_path
    FULLPATH             = l_fullpath
    USER_ACTION          = l_usr_act
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    NOT_SUPPORTED_BY_GUI = 3
    others               = 4.
IF sy-subrc = 0
      AND l_usr_act <>
      CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = l_fullpath
   FILETYPE                        = 'DAT'
TABLES
    DATA_TAB                        = T_DOWNL
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22.

How to replace double quotes with a single quote in a string ?

Hi All:
Can some one tell me how to replace double Quote (") in a string with a single quote (') ? I tried to use REPLACE function, but I couldn;t get it worked.
My example is SELECT REPLACE('STN. "A"', '"', ''') FROM Dual --This one throws an error
Thanks,
Dima.

Whether it is maybe not the more comfortable way, I like the quoting capabitlity from 10g :
SQL> SELECT REPLACE('STN. "A"', '"', q'(')') FROM Dual;
REPLACE(
STN. 'A'{code}
Nicoals.

How to replace multiple occurences of space in a string to a single space?

How to replace multiple occurences of space in a string to a single space?

Hi,
try this code.
data : string1(50) type c,
          flag(1) type c,
          dummy(50) type c,
          i type i,
          len type i.
string1 = 'HI READ    THIS'.
len = strlen( string1 ).
do len times.
if string1+i(1) = ' '.
flag = 'X'.
else.
if flag = 'X'.
concatenate dummy string1+i(1) into dummy separated by space.
clear flag.
else.
concatenate dummy string1+i(1) into dummy.
endif.
endif.
i = i + 1.
enddo.
write : / string1.
write : / dummy.

How to replace original submit_mc?

Similar Messages

Maybe you are looking for