How To Replace Text With video?
Hi,
I purchased this template for AE http://videohive.net/item/commercial-plan/109232
Everything is fine except importing video into it.
If you take a look at the video preview, there is an option to place 4 images/videos in the template. However, when I tried to import video, it does not show up. I tried right clicking on the asset panel and then replacing the existing file with my video. No luck.
The video I tried to import is MP4 Video (in .m4v format).
Also the MP3 file I tried to import does not play in the file after rendering.
Any idea why this is happening?
Thank you.
What version of AE do you have. Earlier versions had problems with MP4 video. It's always best to transcode highly compressed sources before you start manipulating video.
Somewhere in that template there's place holder video or a place holder layer. You must find the original footage layer not the pre-comp, not the nested comp. Once there all you have to do is select that place holder layer in the timeline then select your new video in the Project Panel and hold down the Alt/Option key and drag to the timeline. The footage will be replaced.
Similar Messages
-
How to replace text with vector image in 3d space
Hello,
I want to replace the text in this template http://vimeo.com/15026094 with a vector image logo.
Any ideas would be helpful. Btw, I have CS4.
Thanks,
tdI finally took a look at your Vimeo example and I'd guess that the animation of the text was created with Text Animators and range selectors. As Mylenium said, and as I said
Reveal all of the animated properties that you want to transfer to your new layer. Usually pressing the U key will suffice.
Note: Text animations and shape animators will be ignored unless the new layer is a text or shape layer.
You need read up on Text Animators so you can understand them.
Type a question in the search field at the top right corner of After Effects.
And you'll find all of these resources. (providing you have the Adobe Help preferences set to search the web)
Animation presets will save all animated properties applied to a layer, but they will only apply the keyframes to properties that exist on the layer. Text Animators only exist in text layers so you'll have to animate your logo by hand or grab yourself a font creation tool and recreate your logo as a font. -
Use Powershell to replace text with image in Word document
I have a powershell script that uses a Word document as a template to create signatures that I am pushing out to my organization.
The document is populated with text formatted the way I want the signature to look, that I then do a FindText and ReplaceText on. This works fine for replacing text with text, but I can't figure out how to properly replace some of the holder text with
an image and a link. I found a few posts about adding images to word documents, but none that seem to work properly in this scenario.
Any insight would be greatly appreciated, thanks!Dear BOFH,
You are correct that method I outlined is not for inserting an image into a signature block (which would be in Outlook, not Word). The links you post do certainly deal with outlook signatures, well done... Except that the question was about how to
use a Powershell script to replace text in a Word document with an image. Sure it was framed in the context of creating signatures, but the poster expressed that they already had a method of generating and replacing text, and just needed to know, as
I did, how to do the thing they actually asked.
Please BOFH... Please forgive my audacity in hoping to find a reference (any reference) to how to replace Word text with images via Powershell in a thread titled "Use Powershell to replace text with image in Word document".
This is certainly a scripting question, and even something as simple as "You will need to call the .NET methods for the Word find/replace functionality. Please ask in the Word forums for the correct method to use.
If you need help on calling .NET methods look HTTP ://here"support you offered combined with the contempt you offer in response to my actual substantive help to the actual question asked.
BOFH, you are not better than us, just more arrogant.
Can you please start your own question as this one has been closed. Please see scripting guidelines.
We cannot guarantee you satisfaction as this is a user supported forum. The is no SLA for community support. Perhaps if you posted a better worded question as a new topic someone might be able to help you resolve your issue.
The topic you are posting on is closed and answered.
¯\_(ツ)_/¯ -
Lion replaces text with 'block A' characters in safari
about 1/4 of the sites i vist now (including my own--in safari) have a 'block A' character where there is html text.
does anyone know how to fix this?
thanks.There are two articles on MacFixit about this.
Fonts are implicated in both.
http://reviews.cnet.com/8301-13727_7-20087102-263/webkit-sandboxing-conflict-cau ses-safari-block-a-font-problem/
http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/
Clearing caches and booting to Safe Mode has helped the majority of people experiencing this problem; however, for a few people the problem returns after a while, indicating that either Safari itself or the system's font configuration may be actively corrupting the font cache.
.... (example)
- If this happens, then unfortunately the approach would be to systematically disable system fonts using Font Book until the problem goes away, and then remove the specific fonts that are contributing to the problem. -
How to replace MobileMe with ICloud on my Imac?
how to replace MobileMe with ICloud on my Imac? pleae help. Other devices (Ipad and Iphone) are Iclouded but I can't change MobileMe in my system preferences on IMac (10.6.8)
SylwiaYou need to upgrade the computer's OS. Open the Mac App Store and try downloading Mavericks. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data before upgrading. Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(103507) -
How to highlight text with Adobe Reader XI?
email [email protected]
Thanks. The PDF file was made from a web site article and I guess this is the same as scanned as I cannot highlight. The cursor changes but cannot highlight what I want.
I was able to add text and I did this in Red and will ask the VA to read under the sections marked in Red.
Thanks,
Vernon Pobanz
From: ~graffiti <[email protected]>
To: vernon pobang <[email protected]>
Sent: Tuesday, October 7, 2014 11:57 AM
Subject: How to highlight text with Adobe Reader XI?
How to highlight text with Adobe Reader XI?
created by ~graffiti in Adobe Reader - View the full discussionUse the highlight tool under Comment>Annotations. This will only work if the pdf isn't a scanned image. If that is the case, there is no text to highlight. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6800192#6800192 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Applescript replace text with clipboard
Sorry if this has been asked before, I have been searching for hours and cannot find anything.
what I would like to do is copy text from a safari webpage , swap to the textedit program and replace text with the copied contents.
for eg.
from safari I have copied the user link, I then want it to swap over to textedit, find the keyword "userlink" and replace it with the copied content from safari
userlink
email
number
HHopefully I have explained it correctly, and thanks in advance for any helpHi,
Like this:
set x to the clipboard as «class RTF »
tell application "TextEdit"
set first word of front document whose it = "userlink" to x
end tell
If you want plain text, remove as
as «class RTF » -
How do I text with the iPad 2 using cellular device?
How do I text with the iPad 2 using cellular device? I also have iPhone 4, can I use them both for texting?
The iPad doesn't have any text over cellular capabilities. You can use apps like Text Free to send texts to non-iOS devices, though.
-
How to replace numbers with text in tax return pdf using Adobe Acrobat X Pro
How do I replace numbers with text in tax return pdf using Adobe Acrobat X Pro? The tax return was created using CCH software. Thanks for your review.
Thanks Bill for your quick reply. CCH software is one of the major
suppliers of tax return software. I found an internal source that helped me
make the changes from numbers to text i.e. "$123,456" to "See Schedule O".
I am not sure if I am working in form or final text. Thanks again! Kelly -
How can align text with a video?
I recently received an .avi of a software demo with system sound that needs to be deleted from a customer. I also received a .txt file of the text that should be spoken during the video. The question is : how do I align the text (both spoken and CC notes) with the video? I need to theoretically be able to watch the video as I align the CC notes.
Let me know if you have any tips!
Thank you ..Depending on your version of Cp, you will likely need to convert the AVI to FLV before you can import it into Captivate. At some point either before or after you convert the file you will need to remove the current sound track. If you want Closed Captioning in Captivate to synch with the audio then you will need the audio file to be inserted as Slide Audio.
Getting Slide Audio to synch perfectly with an Event Video or Multi-Slide video can be tricky and unreliable because it depends a lot on factors outside your control such as the end user's PC and how well it can decode video as well as how much bandwith they have for the download to happen quickly. -
Hi
i have 2 columns from flat file
0amount number
10000
"Intangibles" 2000
20000
'sales' 4000
my output is required like
incase if i am getting text ( this text is not constant its coming like any thing shownw above example) i need replace number key figure values in 0amount fileds.
how can i reach with this in field routine
data v_text type char
if source_fields_0amount not equall number
result 0 number ( kf)
like what is code i need to useHi,
One thing's to be clarified :
If you need sometimes number & sometimes text in a particular target field, then it has to be a char field and you cant do any mathematical operation on that later.
--Akashdeep -
Search .docx and replace text with image
I've got a directory containing a series of images. The images will always be the same name and I need to insert them into placeholders in a Word document which will be a template. I thought of using the image names as placeholders, opening the document
and searching for the image name, replacing it by inserting the image, and doing so for each image in the directory.
$file is the name of the image in the directory and it loops through them okay.
foreach($file in Get-ChildItem $savepath -Filter *.jpg)
# search word doc and replace selected text with image ($file)
Also inserting the image seems simple enough from a TechNet article I found, but I've got no idea how to open the Word document and do a search and replace. I found a few articles related to the subject but I couldn't get them to work when I tried to adapt
them.
Any help is appreciated. Thanks in advance.This 'might' be possible, but I'm having a hard time finding good references to the com object capabilities for inserting an image into a word document. Creating new, converting format, that sort of thing is straightforward.
I'd do a search on "powershell word comobject" and variations of insert image update edit, etc. Or maybe someone else with more experience/knowledge has a magic bullet for you. Once you get some info on doing it with powershell, expand
your search by omitting the powershell keyword, there's gotta be some solid documentation for the comobject somwhere, but it will probably be a bit complex.
You can also:
$word = new-object -comobject word.application
$doc = $word.documents.add("<path to word document>"
and get-member to your heart's content, but finding references and/or documentation might be easier.
Good luck!
Edit: This could help, but really doesn't give much insight into placement of the image, only helps getting the image into the doc: http://gallery.technet.microsoft.com/office/44ffc6c8-131f-42f1-b24b-ff92230b2e0a
If you do find something useful, post it here, I'm sure others could benefit!
SubEdit: Should have thought of this already...
http://msdn.microsoft.com/en-us/library/ff837519(v=office.14).aspx -
How to replace text in smartforms.
Hi,
i had requirement to replace text retail invoice with Tax/sale invoice *** delivery challan in smart form
in that smart form they had retun one condition like region no notequl to '06' they had retun one condition to print correct like(Tax/sale invoice *** delivery challan) but region eq 6 they had return one condition it is printing retail invoice.so he want at any condition u need to print like (Tax/sale invoice *** delivery challan) so any body plz help me
thnks in advance.
sivarama.Hi,
I want print invoice form like.
amount 400000
basic.exice(%) 200000
add:output vat 12.5%
add:output vat 2.50%
so
out put is comming like
I want print invoice form like.
amount 400000
basic.exice(%) 200000
12.5%
2.50%
add:output vat
add:output vat
so how i will do modification for that -
How to replace sapdba with brtools after upgrade database to 10.2
All,
I have update our database to oracle 10.2,my brtools version is 7.0 now ,
but can't run analyze table and dbcheck in db13,
seems to still use SQLDBA when run analyze table and dbcheck.
please refer to the below informations.
Detail log: 0810080300.aly
***** SAPDBA - SAP Database Administration for ORACLE *****
SAPDBA V6.10 Analyze tables
SAPDBA release: 6.10
Patch level : 1
Patch date : 2001-05-25
ORACLE_SID : PRD
ORACLE_HOME : /oracle/PRD/102_64
ORACLE VERSION: 10.2.0.2.0
Database state: 'open'
SAPPRD : 46C
SAPDBA DB USER: (-u option)
OS login user : prdadm
OS eff. user : prdadm
SYSDBA priv.: not checked
SYSOPER priv.: not checked
Command line : sapdba -u / -analyze DBSTATCO
HOST NAME : sapprd1
OS SYSTEM : HP-UX
OS RELEASE : B.11.31
OS VERSION : U
MACHINE : ia64
Log file : '/oracle/PRD/sapcheck/0810080300.aly'
Log start date: '2008-10-08'
Log start time: '03.00.09'
----- Start of deferred log ---
SAPDBA: Can't find the executable for SQLDBA/SVRMGR. Please, install one of
them or enter one of them in the SAPDBA profile (parameter
sqldba_path).
(2008-10-08 03.00.06)
SAPDBA: Error - running temporary sql script
'/oracle/PRD/sapreorg/dbacmd.sql' with contents:
CONNECT /******** AS SYSDBA
SAPDBA: Couldn't check SYSDBA privilege.
SAPDBA: Can't find the executable for SQLDBA/SVRMGR. Please, install one of
them or enter one of them in the SAPDBA profile (parameter
sqldba_path).
(2008-10-08 03.00.06)
SAPDBA: Error - running temporary sql script
'/oracle/PRD/sapreorg/dbacmd.sql' with contents:
CONNECT /******** AS SYSOPER
SAPDBA: Couldn't check SYSOPER privilege.
----- End of deferred log ---
Analyze parameters:
Object: All tables in table DBSTATC ( for DB optimization run )
Method: E ( Default )
Option: P10 ( Default )
Time frame: 100 hours
Refresh : All objects
Option: DBSTATCO ( for the DB optimizer: Tables with Flag DBSTATC-TOBDO = 'X' )
** Refresh Statistics according control table DBSTATC **
Total Number of Tables in DBSTATC to be analyzed: 170
Number of Tables with forced statistics update (ACTIV = 'U'): 0
SAPDBA: SELECT USER# FROM SYS.USER$ WHERE NAME='SAPPRD'
ORA-00942: table or view does not exist
(2008-10-08 03.00.09)
SAPDBA: Error - getting size of segment 'SAPPRD.D010INC'
SAPDBA: Error - during table analysis - table name: ->D010INC
SAPDBA: No tables analyzed ( No entries in DBSTATC with TOBDO = X or errors ).
SAPDBA: 0 table(s) out of 170 was (were) analyzed
Difference may be due to:
- Statistics not allowed ( see DBSTATC in CCMS )
- Tables do not exist on database and were skipped
Detailed summary of Step 1:
Number of Tables that needed new statistics according to DBSTATC: 1
Number of Tables marked in DBSTATC, but non-existent on the Database: 0
Number of Tables where the statistics flag was resetted: 0
******* Creating statistics for all tables without optimizer statistics *******
SAPDBA: Using control table DBSTATC
for taking optimizer settings into account
SAPDBA: 0 table(s) without statistics were found.
SAPDBA: 0 table(s) ( out of 0 ) was (were) analyzed/refreshed.
0 table(s) was (were) explicitely excluded or pool/cluster table(s).
SAPDBA: 0 index(es) without statistics was (were) found.
SAPDBA: 0 index(es) ( out of 0 ) was (were) analyzed/refreshed.
0 index(es) was (were) explicitely excluded or pool/cluster indexe(s).
SAPDBA: 157 table statistics from 157 tables were dropped.
They are either explicitely excluded in DBSTATC,
or R/3 Pool- or Cluster- tables
that must not have CBO Statistics
SAPDBA: The whole operation took 10 sec
SAPDBA: Step 1 was finished unsuccessfully
SAPDBA: Step 2 was finished successfully
Date: 2008-10-08
Time: 03.00.19
*********************** End of SAPDBA statistics report ****************
How to replace sapdba by brtools?please give me support,thanks.
Best Regards,
Mr.chen> I have update our database to oracle 10.2,my brtools version is 7.0 now ,
> but can't run analyze table and dbcheck in db13,
> seems to still use SQLDBA when run analyze table and dbcheck.
Yes, it does so, because somebody forgot to upgrade the BASIS SP as well...
What BASIS SP are you using?
regards
Lars -
How I creatat text with hyperlink in application
hi all,
I want to creat some text with hyperlink (it mean when I click to text, it invoke other panel or web...). My program is Application. Can any one tell me how I do it. Pls help me!!!.
Thank you verry muchIs this text HTML? If so, just go to any of the 350,000 sites on the Internet that describe basic HTML. Otherwise, just output the URL as text.
However my guess is that your bigger problems are (a) how to notice the hyperlink is clicked and (b) how to invoke whatever it links to. Right?
Maybe you are looking for
-
WRT54G and WRT54GS Linksys EasyLink Advisor (LELA) users
If you are experiencing any issues with Linksys EasyLink Advisor (LELA) and the latest firmware on the Linksys.com, you may have to roll back your firmware version. Linksys EasyLink Advisor (LELA) may not function properly with the firmware revision
-
Stock overview on basis of product hierarchy (PRDHA)
Hello to All, Is there any SAP standard report of displaying stock overview on basis of the 'product hierarchy' (Field: PRDHA) or do i have to make a copy of the transaction (MMBE) and add the respective field .. Looking forward to your feedback. Tha
-
Deferred tax: Post down payment clearing individually $1 while f-4E3?
Hi all, We are booking the invoice as well as clearing the special GL transaction through F-43/ F-41 001 39S 0009000457 PRADEEP SANGVIKAR 10,000.00- 002 40 6030000039 Testing Charges 9,066.00 SA 003 40
-
I lost WiFi after I upgraded to IOS 6 on my iPhone 4
URGENT ADVICE AND ASSISTANCE NEEDED Hi all the experts out there. I have no problem upgrading to IOS 6 on my iPhone 4S, but when I did the same onto my iPhone 4, after re-start I just cannot connect to WiFi! I had no probelm with this connection PRIO
-
The new MacBook Pros come with "FaceTime HD Camera." Does the current 27" Cinema Display and/or the current 27" iMac also feature an "HD" camera?